From: Yu, L. <lum...@in...> - 2003-12-10 02:40:32
|
It's too bad that your box faile to transition to ACPI mode. Did you = boot MS windows successfully on your box? BTW, I need full ouptput of acpidmp. --Luming -----Original Message----- From: acp...@li... = [mailto:acp...@li...]On Behalf Of Ryan = Underwood Sent: 2003?12?9? 12:51 To: acp...@li... Subject: Re: [ACPI] Shuttle HOT-591P fails ACPI on 2.4.23 Hi, This is the first time I have booted an ACPI-enabled kernel on this machine. So I wasn't expecting too much. ;) Shuttle's spec page for the board: http://de.shuttle.com/591p.htm does claim to support ACPI. I attached the files you asked for. acpi_pic_sci=3Dedge didn't seem to make a difference (paused in same place, and same error) On Mon, Dec 08, 2003 at 10:14:20AM -0500, Len Brown wrote: > Has ACPI worked better on this box using any other releases? >=20 > Does it work any better if you boot with "acpi_pic_sci=3Dedge"? >=20 > I'd be interested in seing the complete dmesg -s40000 output > and the resulting /proc/interrupts. >=20 > thanks, > -Len >=20 > On Mon, 2003-12-08 at 07:24, Ryan Underwood wrote: > > Hello, > >=20 > > Shuttle HOT-591P with latest BIOS (591P025) and Cyrix CPU, kernel > > 2.4.23. It is a Baby AT board with AT and ATX power. > >=20 > > Vendor: Award Software International, Inc. > > Version: 4.51 PG > > Release Date: 03/27/01 > >=20 > > Manufacturer: Shuttle Inc. > > Product Name: VIA APOLLO MVP3 (HOT-597) > > Version: 2A5LEH2B > > (It is actually a 591P, regardless of the DMI string) > >=20 > > It seems the ACPI tables are found, but the system does not properly > > handle the SCI interrupt: > >=20 > > ACPI: Subsystem revision 20031002 > > PCI: PCI BIOS revision 2.10 entry at 0xfb410, last bus=3D3D1 > > PCI: Using configuration type 1 > > tbxface-0117 [03] acpi_load_tables : ACPI Tables successfully = acquired > > Parsing all Control = Methods:....................................................... > > Table [DSDT](id F004) - 227 Objects with 26 Devices 55 Methods 17 = Regions > > ACPI Namespace successfully loaded at root c02dba3c > > ACPI: IRQ9 SCI: Level Trigger. <---- PAUSES HERE > > evxfevnt-0089: *** Error: Could not transition to ACPI mode. > > utxface-0170 [03] acpi_enable_subsystem : acpi_enable failed. > > ACPI: Unable to start the ACPI Interpreter > > evxfevnt-0127 [06] acpi_disable : System is already in = legacy (non-ACPI) mode > > utalloc-0986 [05] ut_dump_allocations : No outstanding = allocations. > > PCI: Probing PCI hardware > > PCI: ACPI tables contain no PCI IRQ routing entries > > ... > >=20 > > At the "ACPI: IRQ9 SCI:" part, it pauses for a few seconds before > > continuing. > >=20 > > A similar system with a Tyan ATX board and K6/III 400 works great. > >=20 > > any ideas? >=20 >=20 >=20 > ------------------------------------------------------- > This SF.net email is sponsored by: SF.net Giveback Program. > Does SourceForge.net help you be more productive? Does it > help you create better code? SHARE THE LOVE, and help us help > YOU! Click Here: http://sourceforge.net/donate/ > _______________________________________________ > Acpi-devel mailing list > Acp...@li... > https://lists.sourceforge.net/lists/listinfo/acpi-devel >=20 --=20 Ryan Underwood, <ne...@ic...> |