[ACPI] notebook going to S3, but rebooting instead of waking up

[Oliver N. <ol...@ne...>]

Hi,

this notebook can be made to sleep (tested on 2.5.65 and 2.5.69)
but doesn't wake up unless I press the power button which makes
it reboot.

	Regards
		Oliver

Dmesg is:

Linux version 2.4.21-pre6 (oliver@oenone) (gcc version 3.3 20030226 (prerelease) (SuSE Linux)) #3 Mon Mai 26 20:59:28 CEST 2003
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000d2000 - 00000000000d8000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
 BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
 BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
511MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 AMI                        ) @ 0x000fa930
ACPI: RSDT (v001 AMIINT VIA_K7   00000.00016) @ 0x1fff0000
ACPI: FADT (v001 AMIINT VIA_K7   00000.00017) @ 0x1fff0030
ACPI: DSDT (v001    VIA   VIA_K7 00000.04096) @ 0x00000000
ACPI: BIOS passes blacklist
ACPI: MADT not present
Kernel command line: root=/dev/hda2 vga=0x317 hdc=ide-scsi hdclun=0 splash=silent splash=silent
ide_setup: hdc=ide-scsi
ide_setup: hdclun=0
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Detected 1661.985 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 3316.12 BogoMIPS
Memory: 515280k/524224k available (1509k kernel code, 8556k reserved, 504k data, 132k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383fbff c1cbfbff 00000000 00000000
CPU:             Common caps: 0383fbff c1cbfbff 00000000 00000000
CPU: AMD mobile AMD Athlon(tm) XP 2000+ stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1661.8314 MHz.
..... host bus clock speed is 265.8929 MHz.
cpu: 0, clocks: 2658929, slice: 1329464
CPU0<T0:2658928,T1:1329456,D:8,S:1329464,C:2658929>
mtrr: v1.40 (20010327) Richard Gooch (rg...@at...)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20030522
PCI: PCI BIOS revision 2.10 entry at 0xfda81, last bus=1
PCI: Using configuration type 1
    ACPI-0352: *** Error: Looking up [\_SB_.PCI0.SBRG.EC0_] in namespace, AE_NOT_FOUND
search_node dffe9540 start_node dffe9540 return_node 00000000
    ACPI-1121: *** Error: , AE_NOT_FOUND
    ACPI-0352: *** Error: Looking up [\_SB_.PCI0.SBRG.EC0_] in namespace, AE_NOT_FOUND
search_node dffe9740 start_node dffe9740 return_node 00000000
    ACPI-1121: *** Error: , AE_NOT_FOUND
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: System [ACPI] (supports S0 S3 S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Embedded Controller [EC0] (gpe 5)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
PCI: Probing PCI hardware
PCI: No IRQ known for interrupt pin A of device 00:11.1 - using IRQ 255
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
vesafb: framebuffer at 0xd0000000, mapped to 0xe0816000, size 65536k
vesafb: mode is 1024x768x16, linelength=2048, pages=41
vesafb: protected mode interface info at c000:5653
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.10e
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:11.1
PCI: No IRQ known for interrupt pin A of device 00:11.1 - using IRQ 255
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1
    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
hda: FUJITSU MHT2030AT, ATA DISK drive
blk: queue c0348ec0, I/O limit 4095Mb (mask 0xffffffff)
hdc: Samsung CD-RW/DVD-ROM SN-324B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: host protected area => 1
hda: 58605120 sectors (30006 MB) w/2048KiB Cache, CHS=3648/255/63, UDMA(100)
Partition check:
 hda: hda1 hda2
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 460k freed
VFS: Mounted root (ext2 filesystem).
reiserfs: checking transaction log (device 03:02) ...
Warning, log replay starting on readonly filesystem
spurious 8259A interrupt: IRQ7.
reiserfs: replayed 11 transactions in 4 seconds
Using r5 hash to sort names
ReiserFS version 3.6.25
VFS: Mounted root (reiserfs filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 132k freed
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
Adding Swap: 1036152k swap-space (priority 42)
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: SAMSUNG   Model: CDRW/DVD SN-324B  Rev: U102
  Type:   CD-ROM                             ANSI SCSI revision: 02
via-rhine.c:v1.10-LK1.1.16  February-15-2003  Written by Donald Becker
  http://www.scyld.com/network/via-rhine.html
eth0: VIA VT6102 Rhine-II at 0xd400, 00:a0:cc:de:d6:85, IRQ 11.
eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 0021.
ohci1394: $Rev: 810 $ Ben Collins <bco...@de...>
ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[10]  MMIO=[dffff800-dfffffff]  Max Packet=[2048]
ieee1394: SelfID completion called outside of bus reset!
ieee1394: Host added: Node[00:1023]  GUID[00030d432511c75d]  [Linux OHCI-1394]
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
raw1394: /dev/raw1394 device initialized
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
ehci-hcd 00:10.3: VIA Technologies, Inc. USB 2.0
ehci-hcd 00:10.3: irq 10, pci mem e49d4700
usb.c: new USB bus registered, assigned bus number 1
PCI: 00:10.3 PCI cache line size set incorrectly (32 bytes) by BIOS/FW.
PCI: 00:10.3 PCI cache line size corrected to 64.
ehci-hcd 00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Jan-22
hub.c: USB hub found
hub.c: 6 ports detected
usb-uhci.c: $Revision: 1.275 $ time 22:38:18 May 26 2003
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xe800, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0xe400, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0xe000, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 4
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
uhci.c: USB Universal Host Controller Interface driver v1.1
mice: PS/2 mouse device common for all mice
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 0x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
BlueZ Core ver 2.2 Copyright (C) 2000,2001 Qualcomm Inc
Written 2000,2001 by Maxim Krasnyansky <ma...@qu...>
BlueZ L2CAP ver 2.1 Copyright (C) 2000,2001 Qualcomm Inc
Written 2000,2001 by Maxim Krasnyansky <ma...@qu...>
Linux Kernel Card Services 3.1.22
  options:  [pci] [cardbus] [pm]
Yenta IRQ list 0098, PCI irq11
Socket status: 30000007
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0820-0x08ff: excluding 0x820-0x87f
cs: IO port probe 0x0800-0x080f: excluding 0x800-0x80f
cs: IO port probe 0x03e0-0x04ff: excluding 0x400-0x40f 0x4d0-0x4d7
cs: IO port probe 0x0100-0x03af: excluding 0x1c0-0x1cf 0x378-0x37f
cs: IO port probe 0x0a00-0x0aff: clean.
ACPI: AC Adapter [AC0] (on-line)
ACPI: Processor [CPU1] (supports C1 C2, 16 throttling states)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Thermal Zone [THRM] (75 C)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected Via Apollo Pro KT266 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
[drm] AGP 0.99 on VIA Apollo KT133 @ 0xe0000000 64MB
[drm] Initialized radeon 1.1.1 20010405 on minor 0
[drm:radeon_unlock] *ERROR* Process 1385 using kernel context 0
Linux video capture interface: v1.00
eth0: no IPv6 routers present