I guess I figured this out. apparently the address fieldie has to be entered like this
dayton\oh\45432. Now the cursor stops at the * Escape Code [ ] * field
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I don't see in the documentation where it explains the special keys (i.e
function keys). How do you exit screens?
On 14/06/17 17:36, John Grillot wrote:
Please have a read of the stock control manual it is covered there but
the end of a screen does depend a little on what screen and program
All of the menu's are normal with X return will work throughout.
Going on, for data entry screens there is again a clear message to
confirm your actions
You need to give me a better clue as to where you are in the system.
Vince
I attached a screen shot of the customer setup. The cursor never stops at the
* Escape Code [ ] * field
I guess I figured this out. apparently the address fieldie has to be entered like this
dayton\oh\45432. Now the cursor stops at the * Escape Code [ ] * field
Looking at the screen dump you are in the Parameter set up.
The manual states that to move between fields use tab | back tab |up and down arrows.
There are others, are you saying these keys are not working ?