Search Results for "stardict-4"

The GTK ACX Tool displays the status of the Texas Instruments (TI) ACX100 IEEE 802.11 driver.

Alternative firmware and software with open source for platforms based on the SoC Realtek RTL8186. Альтернативная прошивка и ПО с открытым кодом для платформ на базе SoC Realtek RTL8186.

vtrunkd - network link bonding and multichannel VPN. Vtrunkd is a Linux VPN daemon used to combine several connection paths into one aggregated channel. Features latency, reordering and jitter management, behaviour analysis optimizations for encapsulated protocols, bufferbloat control, packet redundancy, and multiple cpu cores utilization. Up to 30 heterogenous links bonding supported. Used for live streaming, LTE/3G/Wi-Fi link bonding. 32/64-bit, x86, MIPS and ARM supported. Supports python...

A 2.4 GHz wireless development board suitable for Bluetooth experimentation. Open source hardware and software. This project has moved to GitHub - https://github.com/greatscottgadgets/ubertooth

Nettxrx is a small desktop or tooltray utility that displays a graph of network bytes sent/received, updating every second. It also optionally shows CPU usage. It can log and report usage. Nettxrx runs on WinXP, Vista, and Win7.

This is a LTE RLC implementation which aligns to 3GPP spec 36.322-930. It aims to be a high quality and high performance RLC library and as well as can be easily integrated into your code. For bit field cause, now this code can only be run perfectly on Big-Endian platform.

Tools for using C-motech hardware with Linux. Initially, a program to switch the CNU-680 USB Modem from CD to modem mode will be provided. It is typically used in conjunction with udev. The CNU-680 is sold as "D-50" by ice.net.

nwGTPv2 is free and open source implementation of GPRS Tunneling Protocol version 2 (GTPv2) or Evolved GTP (eGTP). GTPv2 is primarily used for control signalling between Serving Gateway SGW and PDN Gateway (PGW) in Evolved Packet Core (EPC).

Library for handling XBee / XBee-PRO RF modules. The library is written in C and supports the following platforms: Linux (x86, MIPSel), Windows (x86), AT91 SAM7 microcontrollers.

Adapted Driver for Intel PRO/Wireless 2200BG NICs under Linux -- for kernels older than 2.6.20 use ipw2200bg, otherwise ipw2200bgN

Linux driver for the ArrayComm* "iBurst*" wireless broadband devices. Based on an existing GPLed driver "ibut" written in C and distributed by ArrayComm, the project supports porting to new kernel and hardware versions, as well as development. *TM

Cor is a layer 3+4 protocol for zero administration (community/mesh) networks. It is implemented as a linux kernel patch. Check out this website for more details: http://michaelblizek.homelinux.net/projects/cor/index.html

OpenDMTP is a protocol/framework that allows communications with small devices (mobile phones, PDA's, and other high-latency/low-bandwidth devices), especially geared towards the transmission of GPS, temperature, and other remote monitoring information.

The WiFi Guard Dog project is a complete and embeddable captive portal solution for wireless community groups or individuals who wish to open free HotSpots while preventing abuse of their connection. Go to dev.wifidog.org to download the latest version.

WSD4WSN provides Wireshark dissectors for the analysis of Wireless Sensor Networks (WSNs) based upon the IEEE802.15.4 protocol, to be used with the wireshark network packet analyzer.

Berkley Snoop protocol module for Linux. Purpose: avoid speed reduction between big fat pipe (satellite) and wireless links caused by error prone nature of wireless links.

AutoAP is a script that continuously scans for open Wi-Fi connections, tests them for validity, and connects to the strongest signal. If the connection is lost, the script scans again and finds the strongest valid signal again, and maintains a continuous connection to the internet in a mobile or portable environment. The script paremeters are highly configurable, including ability to configure secure connections. AutoAP is an add on to DD-WRT that allows routers to continuously scan for...

Bluemodem will handle all aspects of configuring and connecting to any device that is capable of using dialup networking (Linux only). With all source code. Currently tested with 92 phones and 8 providers.

A command-line windows application to manage wireless network connections, cards and profiles. Connect to WLANs, query for RSSI, stadistics... It can be used as an example of how to use Microsoft Native Wifi API dlls from any ANSI C compatible IDE

ULLA allows developers of network aware applications to access data from device drivers similar to the Wireless Extensions on Linux. However, its new design simplifies the API syntax and expands the access to all wireless technologies such as GSM, BT.

ROSInfo is a tool for monitoring signal levels, traffic and network latency of x86 machines, RouterBoards and other devices running Mikrotik RouterOS.

Campus Ubicuo es un proyecto que se basa en el uso de los nuevos dispositivos portátiles para ofrecer a los usuarios movilidad en un Campus por medio de servicios telemáticos avanzados sobre tecnologías inalámbricas implementados con Sw Libre

A program for linux that will connect to the first available open wireless network. It also has an interactive mode that list the available wifi networks and then gives you the option to select a particular network to connect to.

Blueman is a bluetooth management utility using bluez dbus backend. It is designed to be easy to use for most common bluetooth tasks. Project moved to: http://blueman.tuxfamily.org

This project is a Linux Kernel 2.4/2.6 module/console program for change wireless radio status on Fujitsu-Siemens AMILO M 7440 laptop