Search Results for "hardware"

wavemon is a wireless device monitoring application that allows you to watch signal and noise levels, packet statistics, device configuration and network parameters of your wireless network hardware. It should work (though with varying features) with all devices supported by the Linux kernel. Apart from debian/ubuntu packages and slackbuild scripts for wavemon, this repository contains the full source code.

openchronos-ng is a major rework of openchronos. Compared to openchronos it has the following features: * system message bus for system<->module communication. * hardware RTC timekeeping (no more clock inaccuracy). * rework of timer and ports drivers. * implementation of a module system (drop in applications). * rework of the display routines. * rework of the menu system. The firmware code is also conceptually simpler and smaller which leaves room for more modules (applications).

This project is a Linux Kernel 2.4/2.6/3.x module/console program for changing wireless radio status on the Fujitsu Siemens AMILO A1655G laptop.

IEEE 802.15.4 networkong stack covers PHY and MAC layers (PHY layer implemented in hardware and MAC optionally implemented in software). Also 6lowpan (IPv6 packet encapsulation) is implemented for use by IEEE 802.15.4 and BT LE networks. Note: due to licensing restrictions (and despite project's name) we do not plan to implement any ZigBee related stack parts.

A 2.4 GHz wireless development board suitable for Bluetooth experimentation. Open source hardware and software. This project has moved to GitHub - https://github.com/greatscottgadgets/ubertooth

Tools for using C-motech hardware with Linux. Initially, a program to switch the CNU-680 USB Modem from CD to modem mode will be provided. It is typically used in conjunction with udev. The CNU-680 is sold as "D-50" by ice.net.

Software related to Ericsson mobile broadband modules (f3507g, f3607gw, f3307, c3607 and f5521gw).

Library for handling XBee / XBee-PRO RF modules. The library is written in C and supports the following platforms: Linux (x86, MIPSel), Windows (x86), AT91 SAM7 microcontrollers.

Linux driver for the ArrayComm* "iBurst*" wireless broadband devices. Based on an existing GPLed driver "ibut" written in C and distributed by ArrayComm, the project supports porting to new kernel and hardware versions, as well as development. *TM

ULLA allows developers of network aware applications to access data from device drivers similar to the Wireless Extensions on Linux. However, its new design simplifies the API syntax and expands the access to all wireless technologies such as GSM, BT.

As of Jan 2009, this project and NanoStack 1.x are no longer being actively developed or maintained. Instead there is an effort to add support for Sensinode/cc2430 hardware for the Contiki OS. http://www.sics.se/contiki/

TiVo USB Wireless Adapter device driver for Linux and Windows. The adapter users the Broadcom BCM4320 (AirForce One. Single-Chip 802.11g USB 2.0 Transceiver) chipset and portions of this project may be directly applicable to other devices using the same.

BlueXare Bluetooth Broadcasting System is aimed to provide a content spreading platform. It is formed by a specific GNU/Linux distro, a Bluetooth broadcasting daemon, a Bluetooth service point architecture design and a set of system managent tools.

OpenMAC is a TinyOS-based implementation of IEEE 802.15.4 MAC layer, which lies at the core of MeshNetics ZigBee stack, and provides basic wireless networking (star,peer to peer) to WSN's. Available for low-power ZigBit modules and Atmel AVR Z-Link Kits

This project is a Linux Kernel 2.4/2.6 module/console program for change wireless radio status on Fujitsu-Siemens AMILO M 7440 laptop

Q5 is a complete fully open linux based router / network appliance, including hardware. It supports up to four wireless minipci cards and two 10/100 Mbps NICs. The hardware is build around AMD's AU1500 MIPS processor, running at 264 MHz.

This project provides an inexpensive solution to 802.11g wireless communication using off the shelf hardware and open source technologies. This uses the Atmel AT90USB micro and the ZyDas ZD1211B wireless chipset. Developed by David Garske of Wibotics.com

A new/clean Linux kernel driver/module for IEEE 802.11 Wireless Ethernet Adapters based on Realtek's RTL8180L and RTL8185L chipset

Wep key changer (wepkc) is a client/server application that allows you to protect your ad-hoc (point to point) Wireless network when you are unable to use (due to software or hardware limitations) sophisticated protocols like WPA.

Wireless DCC, Digital Command Control for model railroad over 802.15.4 the network nodes being the handhelds and the DCC decoders themself. Backward compatibility with DCC will be kept but new users wont need command stations and boosters.

Linux driver for realtek based wlan cards. It's a fork of the inactive rtl8180-sa2400 project.