Search Results for "engineering"

Upload, save and run keystroke injections remotely with an ESP8266 + ATmega32u4. Using a USB device that act as a keyboard to inject keystrokes is well known these days. The USB Rubber Ducky by Hak5 is THE hacker gadget for this kind of attack. It introduced a simple script language called Ducky Script, which this project uses too. The ESP8266 is a popular Wi-Fi chip used in a lot of projects. Because it's cheap, small, and has its own file system (SPIFFS), it's perfect for enabling an easy...

IEEE 802.15.4 networkong stack covers PHY and MAC layers (PHY layer implemented in hardware and MAC optionally implemented in software). Also 6lowpan (IPv6 packet encapsulation) is implemented for use by IEEE 802.15.4 and BT LE networks. Note: due to licensing restrictions (and despite project's name) we do not plan to implement any ZigBee related stack parts.

A 2.4 GHz wireless development board suitable for Bluetooth experimentation. Open source hardware and software. This project has moved to GitHub - https://github.com/greatscottgadgets/ubertooth

Router Radio Protocol Tools provide router (server) simulator and a radio (client) simulator for the radio-router protocol. The router simulator can be used to support the integration of the protocol into a radio.

Library for handling XBee / XBee-PRO RF modules. The library is written in C and supports the following platforms: Linux (x86, MIPSel), Windows (x86), AT91 SAM7 microcontrollers.

The goal of this project is to develop a framework to test and measure the performance of IEEE 802.11 based devices. Currently we aims to address the issues related to protocol conformance testing for a device.

OpenDMTP is a protocol/framework that allows communications with small devices (mobile phones, PDA's, and other high-latency/low-bandwidth devices), especially geared towards the transmission of GPS, temperature, and other remote monitoring information.

Distributed tracking system using Lego NXT communicating via Bluetooth

WSD4WSN provides Wireshark dissectors for the analysis of Wireless Sensor Networks (WSNs) based upon the IEEE802.15.4 protocol, to be used with the wireshark network packet analyzer.

As of Jan 2009, this project and NanoStack 1.x are no longer being actively developed or maintained. Instead there is an effort to add support for Sensinode/cc2430 hardware for the Contiki OS. http://www.sics.se/contiki/

DSR-UU is an implementation of the Dynamic Source Routing protocol that runs in the Linux kernel or in the ns-2 network simulator. It was originally created at Uppsala University, hence the UU.

This project provides an inexpensive solution to 802.11g wireless communication using off the shelf hardware and open source technologies. This uses the Atmel AT90USB micro and the ZyDas ZD1211B wireless chipset. Developed by David Garske of Wibotics.com

Wireless DCC, Digital Command Control for model railroad over 802.15.4 the network nodes being the handhelds and the DCC decoders themself. Backward compatibility with DCC will be kept but new users wont need command stations and boosters.

Design and implementation of silicon and software for baseband processors conforming to IEEE wireless standards. Initial focus on WiMAX and WiFi.