Search Results for "scripting"

The StarFishDAQ (or SFDQ for short) is a platform for developing MCU based hardware without having to start from scratch. It consists of hardware, firmware and software components. The SFDQ allows those projects that would otherwise use an off-the-shelf DAQ, PLC or MCU SBC to start with a stack of hardware, firmware and software. This allows more control, customization, and future applicability without sinking a ton of effort. The SFDQ can be used simply and quickly, as-is in...

...Additionally, the rapid prototyping of modern measurement and inspection setups requires a system, where parameters or components can easily be changed at runtime, necessitating the availability of an embedded scripting language. Finally, when operating a measurement system, it is also desirable to extend the graphical user interface by system adapted dialogs and windows. The project has been moved mid 2023 to github: https://itom-project.github.io https://github.com/itom-project

Gwyscope is a low cost, open hardware, Digital Signal Processor (DSP) suitable for Scanning Probe Microscopy measurements, focusing on demonstrating the concept of adaptive scanning, general XYZ data acquisition and statistical data processing on the controller level. More details can be found in: M. Valtr et al., Scanning Probe Microscopy controller with advanced sampling support, HardwareX, Volume 15, e00451 https://www.hardware-x.com/article/S2468-0672(23)00058-5/fulltext It...

ECTk, the electrochemical tool kit, is a command line based application built on Tcl. It allows to define electrochemical experiments either interactively or via a script file sourced by ECTk. Virtually any potensiostat can be driven, the only condition being that the instrument has analogue inputs and outputs. ECTk is developed and maintained by the Electrocatalytic Green Engineering Group at Concordia University. ECTk communicates via any analogue IO board supported by the comedi...

The libbuspirate is a C library to talk with the bus pirate hardware (http://dangerousprototypes.com/docs/Bus_Pirate) in raw, binary scripting mode. The libbuspirate allows to quickly write a short C program to test interfacing with your favorite hardware. The library has mainly be used to interface through SPI with RF transceivers such as CC2500, MRF24J40, Ethernet controller such as ENC28J60, EEPROMs such as 24C02, 24FC1025, LCD display (PCD8544 / Nokia5110), LED display (HT1632), ... ...

JPIV is a platform independent, graphical stand-alone application for Particle Image Velocimetry (PIV) written in Java. PIV is an optical technique for measuring fluid flow velocities. JPIV moved to GitHub. Please visit us at: https://eguvep.github.io/jpiv/

An extension for the Tcl scripting language allowing control of TiePie <http://www.tiepie.nl/> products. Works on Windows and Linux

This toolkit allows complete control of a microscopy setup from Labview, Matlab, Scilab, Python, .Net, VB, IgorPro, Mathematica and more. Included is a standalone program for image acquisition and scripting control of a scientific microscope.