Search Results for "clock"

#8 - GNSS or DCF77 disciplined OCXO based on hardware by DL4ZAO and DL7UKM. Moved over from GitHub/DF4IAH

This software implements the IEC60870-5-104 protocol (client side) for substation data acquisition and control via tcp/ip network using the QT UI Framework. It can be compiled on Linux and Windows platforms. It's possible to poll and view data from the remote system (RTU) and also send commands. >>> Have a look also at my new SCADA project here: https://github.com/riclolsen/json-scada

...Detailed description of the operating principles is available at http://jmfriedt.free.fr/lm_sdr.pdf (French) and http://jmfriedt.free.fr/en_sdr.pdf (English). The latest 2022 release for GNU Radio 3.9 and 3,10, following 3.8 named ng for New Generation, aims at adding bitrate clock tracking + removes the external dependence with libfftw by using the GNU Radio FFT wrapper. Doing so, multiple ACARS decoding blocks can run in parallel. Compile for x86 PC with: cd 3.10ng mkdir build cd build cmake -DCMAKE_INSTALL_PREFIX:PATH=/usr .. make -j4 sudo make install (developed and tested on Debian GNU/Linux) Compile for RaspberryPi4/Buildroot (located in BR_PATH): cmake -DCMAKE_INSTALL_PREFIX:PATH=$BR_PATH/output/target/usr -DCMAKE_TOOLCHAIN_FILE=$BR_PATH/output/host/share/buildroot/toolchainfile.cmake ../ make -j4 make install

[Introduction] xSmbus-m01 is not only a Java API, but also a program that can be executed separately. The following are its function options: Need to be executed at the command prompt, java -jar /YourPath/xSmbus-m01-1.0p.jar Help - list the parameter table Verification - verify that the product is working properly Test - used for system maintenance, in advance Check - determine if there is a device on the I2C location Scan - search in the range of 00-FF, search out on the I2C bus...

...NEW: supports day number from 0 of any calendar conversion all-way between supported calendars supports multiple epochs and epoch generation. convert between some epochs without calendar support, ie, J2000.0, JDN, to some effect can create/import epochs and use TAI clock << Months`Months` {PrettyDate[], PrettyDate[calendarChange2[Date[], gregorian, julian], julian], MoonPhase[]} {"Sunday, July 13 2014. 2:37:04 p.m. -4 GMT", "Saturday, Iunius 30 2014. 2:37:04 p.m. -4 GMT", "Full Moon"} timeDeduce, a minor extra: deduce and show other times / angles, using time eqn. input: GMT,lon,tz,arieslon output: input + SHA,Ra,LHA ; in dn,tm or ang (for historic reasons files are also in https://sourceforge.net/projects/periodictablemm/)

...It's sample buffer is also smaller than a commercial scope, however sufficient for most oscilloscope functions. This is a version based on the PIC16F877A microcontroller running with a 20MHz clock. The maximum sampling rate is 1 MHz with a 5 Mhz equivalent sampling mode. Currently, the computer interface supports USB, serial, and parallel ports. Good luck on the construction and I hope you enjoy your oscilloscope. I am happy to answer any questions or provide technical support for this design.

The application was designed for the real time contactless photoplethysmography of the human face by means of an ordinary webcam in ambient light environment System requirements: - AMD or Intel CPU with 2 cores and 2.6 GHz clock speed (or higher); - 512 Mb of RAM (or higher); - OS Microsoft Windows 10/8/7/XP, booth 32 and 64 bit versions; - A RGB webcam (Logitech B910 is the best choice).

Simple Binary Clock

PyPak is a Python library for communication with Campbell Scientific dataloggers through the PakBus interface over TCP/IP or serial lines.

A C++ include file providing a class to measure time intervals in various formats.

This tool aids the assessment of physical performance of athletes by clocking jump and ground contact duration. This software is used to clock, calculate, and visualize the performance.

DevLogger is a software framework used to collect, monitor, and log data from any number of instruments or input devices simultaneously. Initial support provides for serial connections to Radio Shack 22-812 multimeters and My Weigh HD Scales.

Software written in Python to take oscilloscope data for a data transmit channel and a data clock as inputs, and output an eye diagram. The eye diagram helps evaluate the quality of the transmit data.