Search Results for "ethernet"

Open Source SW/HW Project for Embedded Ethernet Applications. Works with AVR ATmega256/128/103, AVR32, SAM7X, SAM7S(E), SAM9, AT91X40, GameBoy Advance, Cortex M3 / M4 (STM32, NXP LPC, LM3S), Freescale Coldfire, RTL8019AS, LAN91C111, CS8900 and DM9000E chips. Offers a tiny TCP/IP stack including HTTP, FTP and DHCP.

Apple Disk Transfer ProDOS (ADTPro) transfers classic 8-bit Apple disk images over a serial, ethernet or audio link to a more modern computer. Based on the seminal ADT, ADTPro can transfer any ProDOS- or SOS-visible volume.

The C-GM Counter is a low cost (<50$) DIY Hardware & Firmware for building a Connected Geiger-Müller counter device to record beta-gamma radiation levels. The counter is the hardware part of the overall A-GM project aimed for providing a long-term continuous measurement of the radioactivity level. see also A-GM Manager at https://www.instructables.com/id/DIY-Radioactivity-Counter-IoT-and-Eco-system/ ** IMPORTANT ** : From v1.4, Arduino Nano require Optiboot bootloader to work, other...

Microhcip PIC18F based LCD weather station that uses Ethernet connection to download data from the Internet.

This is a new object-oriented networking stack for the ChipKit UNO32 and MAX32 boards. It currently supports just the ENC28J60 ethernet chip, but could easily be expanded to include other network chips. It offers a full network stack, with TCP and UDP, along with the ability to have multiple ethernet connections. Multiple sockets across multiple protocols are also possible. It has been designed to have a very simple interface to take a lot of the drudgery out of ENC28J60 programming.

LeanLoader is a modularized boot loader for tiny embedded systems including 8-Bit AVR or low end ARM7TDMI MCUs. Among others, it supports TFTP over Ethernet as well as XMODEM over RS232.

Cnc's IP Data Volume Report: Logs IP to IP contact, number of packets, bytes, time of contact, Ethernet too! View via local web interface. Very simple for those who want to view who your computer is contacting the most!

simplified, portable interface to several low-level networking routines, including network address manipulation, kernel arp and route table manipulation, firewalling, interface configuration, IP tunnelling, and raw Ethernet and IP datagram transmission.

Gspoof is a GTK+ program written in C language which makes easier and accurate the building and the sending of TCP packet with a data-payload or not. It's possible to modify TCP/IP fields also Ethernet header working to Link Level.