Search Results for "socket ip"
Sort By:
Showing 14 open source projects for "socket ip"
View related business solutions-
Ditch those spreadsheets, shared drives & crazy-expensive solutions with too many bells & whistles. ContractSafe offers the simplest way to manage your contracts efficiently without breaking the bank.
-
Simplify every aspect of buying for your business in Order.co. From sourcing products to scaling purchasing across locations to automating your AP and approvals workstreams, Order.co is the platform of choice for growing businesses.
-
1
SerialToIP is a simple Terminal Server software providing transparent pipe either in TCP server or TCP client socket mode from TCP/IP to a pre-configured serial port. Implemented in C# for .NET 2.0 so the command line version could work in Mono-runtime as well.
-
2
openWrt-snort
Image of OpenWrt OS, with snort community featured in.
Image of OpenWrt OS, with snort community featured in, for Raspberry Pi 4/ 4B+ and 400, basically for Processor BCM2711. Installed Snort Community Model to Intrusion Detection system. Prevention system not installed. eth0 used as output/ LAN socket, to run internet and access router. eth1, which can be USB -> Ethernet port, is used as WAN port, to connect Pi board to Internet IP. to flash img file, you can restore in SD card, or use Balena Etcher to flash. or you can use DD commend... -
3
freeRTOS & libraries for AVR ATmega
freeRTOS for Arduino Uno, Goldilocks 1284p & Mega 2560
AVR ATmega port of freeRTOS A port of freeRTOS which can be flexibly flexibly configured use almost any available Timer on AVR ATmega devices and will operate with almost any classic Arduino device from Arduino, SeeedStudio, Sparkfun, Freetronics or Pololu. Going forward this repository will be updated less often and only with major releases. Please check at Github for the latest commits. https://github.com/feilipu/avrfreertos The Goldilocks Analogue story is told here.... -
4
Arduino HomeKit ESP8266
Native Apple HomeKit accessory implementation for the ESP8266 Arduino
... with Apple HomeKit! This library is built with ESP8266 Arduino Core 2.6.3. Lower versions may compile with errors. For ESP32, see Arduino-HomeKit-ESP32. The HomeKit running on ESP32 has a GREAT PERFORMANCE which is 10x faster than ESP8266. You should set the ESP8266 CPU to run at 160MHz (at least during the pairing process), to avoid the tcp-socket disconnection from the iOS device caused by a timeout. -
ConnectWise ScreenConnect, formerly ConnectWise Control, is a remote support solution for Managed Service Providers (MSP), Value Added Resellers (VAR), internal IT teams, and managed security providers. Fast, reliable, secure, and simple to use, ConnectWise ScreenConnect helps businesses solve their customers' issues faster from any location. The platform features remote support, remote access, remote meeting, customization, and integrations with leading business tools.
-
5
IBM's Software Trusted Platform Module (TPM) includes a TPM 1.2 implementation, low level demo libraries and command line tools, a TPM test suite, and proxies to connect from a TCP/IP socket to a hardware TPM. tpm4769 is the latest version, with TPM side support for OpenSSL 1.1. The utilities and test suite have not been ported to OpenSSL 1.1. They remain at 1.0. For the SW TPM 2.0, see https://sourceforge.net/projects/ibmswtpm2/. TPM 1.2 and TPM 2.0 are not software compatible.
-
6
BGP Looking-glass
Open Source BGP Looking-glass
BigPlg allows the collection of the IPv4 Internet routing table which may be viewed by service providers and/or ISP customers to validate IP routing across autonomous systems. Routing updates may also have attributes aliased to become (graph) readable. This function exists to allow the exporting of RIB updates to Splunk, or any such data collector. A beneficial side-effect of collecting BGP routing information is the ability to track BGP updates/events local or remote(upstream). To analyze... -
7
XVMSocket is a Linux Kernel Module that provides a new socket family for high throughput (40-70 times better than TCP/IP sockets) between applications running on different guest Linux VMs on the same Xen system. No changes to Xen or Linux required.
-
8
RTL-lwIP is the porting of the lwIP TCP/IP stack to RTLinux-GPL. It allows the RT-Tasks to use a socket-like API to send and receive TCP/UDP messages through an Ethernet network. Two Ethernet cards are supported: - 3Com905C-X - Realtek8139
-
9
This project allows users to create their own lower-level network (such as TCP/IP or another protocol) stack implementations below the sockets layer by converting the current socket layer into a functional API.
-
ConnectWise SIEM (formerly Perch) offers threat detection and response backed by an in-house Security Operations Center (SOC). Defend against business email compromise, account takeovers, and see beyond your network traffic. Our team of threat analysts does all the tedium for you, eliminating the noise and sending only identified and verified treats to action on. Built with multi-tenancy, ConnectWise SIEM helps you keep clients safe with the best threat intel on the market.
-
10
The objective of this project is to provide an optimized TCP/IP stack by eliminating the data copying at the socket interface and implementing a feedback-based adaptive rate-based flow control algorithm to maximize the network bandwidth utilization.
-
11
Powerful cross-platform, ANSI C library for writing network applications. Full IPv4 and IPv6 support, multiple socket threading, broad- and multicasting, interface access, link-layer access, raw IP datagrams, and more.
-
12
hSockets is a set of handler classes originally designed as a university research on Linux-based TCP/IP connections. It resembles the funcionallity of Java's Socket API, which includes a InetAddress class, Socket and ServerSocket classes
-
13
IP packets generator, use row socket to generate various IP packets, including ICMP,TCP,UDP or user defined with fake source IP. Use for network testing. (I write this program to test the router)
-
14
inetid is a simple wrapper for services started from inetd.conf. It can give you ip-, host- and port-information about the socket that's created when your service gets spawned by inetd. you can use it with or without tcp_wrappers. available in perl & C.
- Previous
- You're on page 1
- Next