Search Results for "rpi"
Sort By:
Showing 49 open source projects for "rpi"
View related business solutions-
Paessler: Easy to Use With Enterprise Power. Free TrialYou shouldn't have to choose between a monitoring tool that's easy to use and one that's powerful enough for a complex environment. PRTG's low-code interface lets any admin build dashboards, set alerts and monitor devices without scripting, while custom sensors and full API access are there when your team needs deeper control. One platform, no compromise. Download a free 30-day trial now.
-
Ship Agents FasterGemini Enterprise Agent Platform lets you rapidly build, scale, govern and optimize production-ready agents grounded in your organization's data. The platform enables developers to build custom or pre-built agents for virtually any use case. New customers get $300 in free credits.
-
1
Rpi-chromium-boot
Boots directly into chrome (chromium), supports pi zero
Bootable image for the raspberry pi. boots directly into chromium browser Wifi enabled (edit /wpa_supplicant) Will auto connect to open wifi network SSH enabled (login pi/raspberrypi) Raspbian Buster based, supports original pi zero Pi models supported: Pi 1, Pi 2, Pi3, pi zero, pi zero2, pi4, pi400 Minimum 8GB sd card, auto expands on first boot -
2
k3sup
bootstrap K3s over SSH in < 60s
k3sup is a lightweight utility to get from zero to KUBECONFIG with k3s on any local or remote VM. All you need is ssh access and the k3sup binary to get kubectl access immediately. The tool is written in Go and is cross-compiled for Linux, Windows, MacOS and even on Raspberry Pi. This tool uses ssh to install k3s to a remote Linux host. You can also use it to join existing Linux hosts into a k3s cluster as agents. First, k3s is installed using the utility script from Rancher, along with a... -
3
Raspberry Pi Void Linux img with DE
Light weight ARMv6 Pi boot image for desktop use
...Without any setup, the system will immediately boot to the graphical login interface. You'll need an SD card of at least 2GB. Write the image to the SD card using your preferred tool. (i.e. RPi imager or balenaEtcher) You can expand the root partition using GParted, or use resize2fs to extend the partition live after booting. The password for both the root and the default account, 'user', are 'voidlinux'. It is strongly advised to change the default password immediately after installation. 2024-03-14 rootfs updated to 2025-05-25 packages https://voidlinux.org -
4
WebChangeMonitor
Monitors a number of web pages for changes.
Monitors a number of web pages and tracks changes based on the content of the web pages. Allows to monitor several protocols, including HTTP and HTTPS. Allows to view and record differences. Available for Win7/10/11/+, Linux and others. -
Save Up to 91% on Cloud Compute With Spot VMsRun batch jobs at 60-91% off with Spot VMs. Long-running workloads get automatic discounts with sustained use.
-
5
Karaoke Hoster V5
Karaoke Hosting for Ubuntu 22.04 (64) & Raspberry Pi Bookworm (64)
Karaoke Hosting DJ Hosting Karaoke Player Video Sequencer Pitch Changing Sync Adjustments (Requires FAST scratchpad access!) Written in Gambas3 Program Compiled with prebuilt environment with zip extract. Ubuntu 22.04 (64) RPI Buster (64) RPI Bullseye (64) -
6
KB1OIQ - Andy's Ham Radio Linux
Install ham radio software on Debian Live, RPi OS, or Ubuntu Linux
Latest Version: - Version v27: May 3rd, 2026 Version 27 ======== AHRL can be installed on top of Debian Live, Raspberry Pi OS, or any supported flavor of Ubuntu Linux. The supported Linux flavors are listed in the GETTING_STARTED document. An installation script does all of the work. Please download and read the bug workarounds file: https://sourceforge.net/projects/kb1oiq-andysham/files/v27/V27_Bug_Workarounds.txt Please download and READ the installation... -
7
AmogOS
Among-us themed OS. As seen on Reddit and Youtube
A parody OS inspired by Among Us. (pronounced A-mog-O-S). -
8
TFT_eSPI
Arduino and PlatformIO IDE compatible TFT library
...ILI9341 and ST7796 SPI-based displays are recommended as starting points for experimenting with this library. The library supports some TFT displays designed for the Raspberry Pi (RPi) that are based on a ILI9486 or ST7796 driver chip with a 480 x 320-pixel screen. -
9
Midbar
Advanced hardware data vault
Advanced hardware data vault designed to maximize the cost of unauthorized access to your data. https://midbar-official-website.netlify.app/ Attention: The latest ESP32 version of Midbar compiles successfully in Arduino IDE 1.8.9 with ESP32 package v2.0.8. There might be compatibility issues with other versions of the ESP32 package for Arduino IDE. STM32F401CCU6 + Arduino Uno Version V1.0: https://www.instructables.com/Midbar-STM32F401CCU6-Arduino-Uno-Version/ RTL8720DN + Arduino... -
Cut Data Warehouse Costs by 54%BigQuery delivers 54% lower TCO with exabyte scale and flexible pricing. Free migration tools handle the SQL translation automatically.
-
10
OpenWrt-Rpi
Raspberry Pi & NanoPi R2S/R4S & G-Dock & x86 OpenWrt Compile Project
...The system leverages OpenWrt’s modular package ecosystem, enabling a wide range of networking applications and services. It is particularly useful for home labs, IoT environments, and edge networking setups. Overall, OpenWrt-Rpi turns a general-purpose single-board computer into a powerful and customizable networking device. -
11
PearlLinux-XFCE-RPi4-64bit
Pearl Linux XFCE 64 bit OS for Raspberry Pi4 with TwisterOS Extras
...They are still working on their release based on Debian 11 Bullseye. Pearl has many elements from TwisterOS including the Theme Twister working great as well as Pi Apps, Pi Kiss, RPi Config etc. So many features to list them all but this system has you covered. -
12
raspberry-gpio-python
A Python module to control the GPIO on a Raspberry Pi
...If you are after true real-time performance and predictability, buy yourself an Arduino! (see http://www.arduino.cc ) Note that the current release does not support SPI, I2C, 1-wire or serial functionality on the RPi yet. This is planned for the near future - watch this space! -
13
Raspberry Pi Push Notifications
Notifications to phone from Raspberry PI for GPIO connected devices
This software is for delivering push notifications to remote devices such as smartphones and tablets from a Raspberry Pi when the Raspberry Pi is connected through its GPIO pins to a device which holds a relay or electronic switch temporarily closed when activated. An example of such as device is a Dakota Alert break beam sensor. -
14
Metal detector based on RP2040
Pulse induction metal detector using Raspberry Pi Pico board ( RP2040)
Based on Raspberry Pi Pico board, this metal detector is included in pulse induction metal detectors category, with well known advantages and disadvantages. RPi Pico generate 3,3v amplitude pulses at one of GPIO pins. This pulses are amplified and applied to a MOSFET device that had the searching coil in series with drain. The pulse will produce a magnetic field generated by the searching coil, and becose of eddy currents, the target will produce a very low corresponding voltage at the coil terminals. ... -
15
First goal of the project is to create a C Library to easily use the GPIO of a raspberry PI 3 Under linux (currently raspbian jessie). Second goal is to create a program in order to dump cartridges of a 1970's videopac game console. Such a program run under raspberry PI 3 with the use of a dedicated hardware board.
-
16
[LINUX] Pwnagotchi Connection Share
Simple bash script for connection sharing.
~ BY DOCTORX FOR PWNAGOTCHI ITALIA ~ This is a simple bash script that allow connection sharing between your host PC and your Raspberry Pi Zero W. It is a modified version of the original script that automatically set up a DNS on your Pwnagotchi*. You have to run this script every time you connect your Pwnagotchi to your PC and want to share your internet connection. Useful for let the gotchi able to upload handshakes to online cracking services like OnlineHashCrack. HOW TO USE: In... -
17
GassistPi
Google Assistant for Single Board Computers
Google Assistant for Single Board Computers. In May of 2017, Google Released it’s AIY Projects kit. Initially not many had access to it, so that is when I started modifying the Google Assistant SDK adding AIY like features to help out the ones left without the kit. Every project requires a name and so I named it GassistPi (“G”oogle “Assist”ant on “Pi”). Fast forwarding to date, the project works not only on Pi boards but on a number of other platforms. It has some interesting custom actions... -
18
BerryNet
Deep learning gateway on Raspberry Pi and other edge devices
This project turns edge devices such as Raspberry Pi into an intelligent gateway with deep learning running on it. No internet connection is required, everything is done locally on the edge device itself. Further, multiple edge devices can create a distributed AIoT network. At DT42, we believe that bringing deep learning to edge devices is the trend towards the future. It not only saves costs of data transmission and storage but also makes devices able to respond according to the events... -
19
image-builder-rpi
SD card image for Raspberry Pi with Docker: HypriotOS
This repo builds the SD card image with HypriotOS for the Raspberry Pi 1, 2, 3, 4 and Zero. You can find released versions of the SD card image here in the GitHub releases page. To build this SD card image we have to take the files for the root filesystem from os-rootfs. -
20
iHome by ionware
iHome Smart Home System Platform
...The iHome software system comes fully configured as a SD Card image file for Raspberry Pi Zero wifi Plug and Play capability complete with MBLogic, Node-RED and MQTT already fully installed and ready to go. See wiki instructions to burn the SD Card image file, insert into your RPi Zero and Plug and Play. The iHome is an Internet of Things (IOT) demo project for the ionware ionC1 hardware and the software system and is a complete SCADA platform c/w Modbus TCP Servers and Modbus RS485 serial clients for scalable building automation projects. See - ionware.io/free-offer/ -
21
GROWbox Supervisor System (GROWSS)
Automated Plant Environment Growing System using Raspberry Pi
GROWbox Supervisor System (GROWSS) is a grow box or grow cabinet environmental controller. GROWSS uses a Raspberry Pi (RPI) & Grove sensors to monitor and control the environment in your grow box or cabinet. Environmental factors such as temperature, humidity, soil moisture, & smoke (from fire) are monitored and displayed on a terminal connected to the RPI & on a mobile app. GROWSS also controls the exhaust fan and grow lights based on the time interval (ie. 12 hours on/12 hours off) & from environmental factors, temp & humidity. ... -
22
Rpi LCD 2004
C# library for access a LCD 2004 with HD44780 over I2C
C# library for the HD44780 controller and a I2C-Adapter PCF8574T. Prerequisite: -Raspberry Pi -Installed Mono or NetCore -Installed Wiring Pi Library -connected LCD display over I2C (A00) Features: -Simple design and display own chars (see progress demo) -German umlaute -Access easy special chars like pi, degree,omega .... -Display strings center, left and right align -Control backlight,Cursor,Display -simple interface -
23
pi-qemu-wine
Image preconfigured to run x86 windows apps
Raspbian Stretch with Qemu-x86 and Wine setup - kernel compiled for 3G/1G (std is 2/2) - chroot of x86 raspbian - wine installed for windows compatibility This Raspberry Pi image enables you to run x86 Linux and Windows applications on a Raspberry Pi (all models inc pi3) Usage: double click in the wine-user icon type: wine ~/.wine/drive_c/windows/notepad.exe - 04/03/2018 - updated to Raspbian Stretch - fixed issue with incorrect kernel NOTE: don't get too excited -performance on a pi3 is 300Mhz pentium level.... See also https://github.com/mikerr/RPi-QEMU-x86-wine/blob/master/README.md Twitter: mikered -
24
revfat+4rpi.sh
Script to take an SD card image created by Livemedia-Creator (such as
...To use this script, provide the image name as the first argument and the new "UPPERCASE 4-8 char alpha-numeric only" bootlabel for second arg, you can safely add a dash too *BOTH args $1 and $2 are mandatory in this configuration to ensure maximum likelihood of successful booting Use Example "./revfat+4rpi.sh [image-name.img] RPI-BOOT" Requirements The actual rpi install image you created with livemedia-creator already! Also, bash (bash) fdisk (util-linux) -
25
zARCHIVES.omxplayercamviewsvcmeye-rpi
Raspbian-lite with omxplayercamviewsvc/motioneye
Raspberry Pi reference 2018-04-17 Generated using pi-gen, https://github.com/RPi-Distro/pi-gen, 5df1e969c8bc005c55718d3e03a2bad8b4a300ac, stage2 Firmware: https://github.com/raspberrypi/firmware/tree/ce8652e2c743f02f04cb29f23611cbf13765483b Kernel: https://github.com/raspberrypi/linux/tree/81dda1af754c3af667944af7156bf1c5cdf9beee Uname string: Linux version 4.14.30-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1102 SMP Mon Mar 26 16:45:49 BST 2018
