Search Results for "microchip"

FlashForth is a standalone Forth system for the Microchip PIC 18, 24, 30, 33 and the Atmel Atmega series of microcontrollers. A Forth system with interpreter, compiler, assembler and multitasker is provided.

WxPic allows, with a PC and an adapter (programmer), to program a PIC micro-controller, by loading a HEX file, reviewing and/or editing the configuration or memory and writing and/or verifying the device flash memory.

USB Resources for Microchip Microcontrollers and libusb, also libftdi and openocd binaries

EtherCard is a driver for the Microchip ENC28J60 chip, compatible with Arduino IDE. It is adapted and extended from code written by Guido Socher and Pascal Stang. High-level routines are provided to allow a variety of purposes including simple data transfer through to HTTP handling. Non-AVR boards are NOT currently supported (101/Zero/Due) #211 Hardware: Depending on the size of the buffer for packets, this library uses about 1k of Arduino RAM.

PK2Aux is a library and suite of command-line utilities for using the Microchip PICkit2 programmer device for purposes other than programming (such as the generic pin controls, serial UART, and logic analyzer modes provided by the Windows software).

can4linux is hosted on https://gitlab.com/hjoertel/can4linux since 2016. Don't use SourceForge anymore for this code. can4linux is an universal Linux device driver for ISA or PCI interface boards with CAN interface and embedded CAN controller solutions. Based on the API provided by can4linux commercial protocol stacks for CANopen, J1939 and DeviceNet are available. A first PCI board with an FPGA based CAN FD controller is supported (TARGET=IXXAT_IB500) in the CAN FD ISO mode but also non-ISO

usbpicprog is a Microchip PIC programmer with simple hardware: one PIC18F2550 and some components. It's therefore easy and cheap to build. Usbpicprog consists of 3 components: Hardware, Embedded software and a stand-alone program for Win, Mac and Linux.

Super lightweight task scheduler aimed at 8 bit AVR ATmega micro-controllers (perfect for Arduino), although it can easily be used on other hardware like Microchip PIC. It uses simple round-robin scheduling so no priority levels can be set. You choose the time interval by calling dispatchTick(), this is usually in a timer interrupt. Range for number of tasks: 0 to 255 tasks Range for delay: 0 to 65535 ticks Each task only uses 5 byte of RAM. The one task LED blink example only uses 5 bytes of RAM and 476 bytes of program memory for the whole program.

It is a bit timing calculator for the popular Microchip MCP2510. It has a graphical diagram view of your choosen options. You can save or print a report at the end.

goinedit is a texteditor, Integrated Development Environment that supports every programming languages. It has an integrated shell terminal and function buttons like compile, execute, debug. It has a support for Microchip Pic and pickit! easy to use!

This project aims to provide (initially) read acces of FAT16 formatted MMC/SD cards for Microchip PIC 18-series

Max Microchip GPL is a multi-protocol RFID reader for scanning pets implanted with an under-skin ID microchip. The external hardware required can be built with no soldering, and connects simply to the PC's Line In Audio jack.

unPIC is a Perl script that disassembles Microchip microcontroller's HEX files. This is a powerful tool for all reverse engeneers that creates a well understandable assembly source from a binary file. Creates xrefs, labels, subroutines and much more...

BatMan is a free Batterie-Manager for Camping-Cars based on a Microchip PIC16C74. It also supports timed switch on or off for 8 outputs.

...Its goal is to create an RFID kit-agnostic API ala JDBC. Thus, programmers will write the same code to communicate with any RFID kit. It has been tested with Texas Instruments and Microchip RFID kits.

Nanov6 is a minature IPv6 stack for the Microchip PIC16 family of microcontrollers. Its modular design and simple API is designed for easy modification and itegration into a wide variety of next-generation network enabled embedded applications.

MIOS is an operating system for the PIC18F452 microcontroller from Microchip with a focus on MIDI IO, digital and analog signal processing.

An universal programmer for EPROM/EEPROM/FLASH chips (27Cxx/28Fxx/29Fxx), Microchip PIC and Atmel Microcontrollers, Serial EEPROM (24Cxx,93Cxx,25xx,others), JTAG interface, and other devices. Configurable to support virtualy any device.

PicBurner is a complete solution for programming Microchip PIC microcontrollers and maybe other microcontrollers and EEPROMs. The software will be build in Borland DS 2006, personality C++ and hardware will support RS232 and USB interfaces.

This is a very simple simulator for the Microchip PIC16C71. I've used it for various small projects. It has an option video display feature to simulate a software-generated video output, which I used to debug PIC-Pong.