Search Results for "avr code"

Solution Editor (eS) is a free, lightweight, cross-platform, development environment (IDE) for Assembler, C or C++ programming, designed to interface with various compilers and debuggers (GDB,CDB). The environment allows you to develop and debug code for MIPS, ARM, AVR and any other processors for embedded solutions and desktop applications. It contains a minimum of settings for easy and convenient programming. The hardware debugging process is possible if you have the hardware...

... megaAVR series (ATmega328P, ATmega1284P, ATmega2560, ATmega32U4, AT90USB1286, etc.) as well as the new megaAVR 0-Series (ATmega4808, ATmega4809, etc.). On the other side, while eCxx is primarily designed to work in NodeMCU, it should also support other ESP-12 based design as well as ESP-01 based design. The Makefile build system and some of the tools would only run on Linux. However, the library source code should be portable enough to be built using other build systems for AVR and NodeMC

A small GUI system for monochrome and color LCDs suitable for embedded systems with very limited system resources (like 8 bit microcontrollers). Comes with a graphical editor for creating a menu. Runs on Linux and Windows (Cygwin is recommend for using all features). Samples showing the usage on a PC, AVR, and STM32 microcontrollers are included.

Mark3 is a sophisticated RTOS and embedded systems toolkit, targeted towards a growing list of MCUs. Beyond providing "just another scheduler", it provides heaps, drivers, a shell, an event-driven GUI framework, and much more! It currently supports a variety of Atmel AVR, MSP430, and the ARM Cortex-M series of microcontrollers, with other platforms to follow. Mark3 was designed from the ground-up using disciplined object-oriented design principles - and unlike the vast majority of free...

EtherCard is a driver for the Microchip ENC28J60 chip, compatible with Arduino IDE. It is adapted and extended from code written by Guido Socher and Pascal Stang. High-level routines are provided to allow a variety of purposes including simple data transfer through to HTTP handling. Non-AVR boards are NOT currently supported (101/Zero/Due) #211 Hardware: Depending on the size of the buffer for packets, this library uses about 1k of Arduino RAM. Large strings and other global variables can...

PRTOS is an open-source preemptive real time operating system kernel for embedded applications. It presently supports the AVR and MSP430 architectures. The advantages of PRTOS are: It has the smallest footprint of any true preemptive system: 1.9kB for basic scheduling and task control, 5.1kB with all the features below (AVR '328 / gcc -Os); Only 950 lines of code implement all of the RTOS features (SLOC-L); The system is well documented with a comprehensive manual, well-commented...

Simplest of possible kernel for iterative time division multithreading on smallest AVR boards Arduino. This is a small and adapted part of the future "Like OS".

"µOS++" (micro OS plus plus) is an open source, royalty-free, real-time operating system intended for embedded systems built around ARM Cortex M or AVR devices. It is based on a preemptive scheduler written in C++ (more info in the Wiki).

AvRtos is a small, preemtive, priority based real time operating system for Atmel AVR and ARM microcontrollers. It was written in C. AvRtos provides message queues and semaphores for task synchronization. It uses a static memory allocation scheme. AvRtos is nearly the smallest RTOS out there. Even pico]OS is much bigger. AvRtos can be compiled using gcc compiler. There is a AvrStudio 4 and Eclipse project file to get the example code working very quickly.

C lang code (avr-libc) for door opener with Atmel AVR microcontroler with ID-2 RFID reader.

Firmware and schematic for a USB HID compatible remote control consumer device using an Atmel AVR Atmega8. No drivers are needed for WindowsXP / WMP10 / Vista / Windows 7. Press Play/Stop/Pause and control media player directly from your remote control.

This code programmed into an AVR microcontroller wired to the receiver's JTAG port allows loading unsigned code on SMP8634 based media receivers enabling you to boot other operating systems e.g. Linux. (Only x30Xt receivers are currently supported)

SimpleAVROS is RTOS designed special for AVR microcontrollers. Supported Compiler - AVR Studio. Language - Assembly. This is RTOS consist of source code. Supported microcontrollers - ATmega48; In the future- ATmega88/168, ATmega164/324/644, AT90usb82/162