Search Results for "python-i2c-tiny-usb" - Page 47
Sort By:
Showing 3204 open source projects for "python-i2c-tiny-usb"
View related business solutions-
Ship Agents FasterGemini Enterprise Agent Platform lets you rapidly build, scale, govern and optimize production-ready agents grounded in your organization's data. The platform enables developers to build custom or pre-built agents for virtually any use case. New customers get $300 in free credits.
-
$300 Free Credits for Your Google Cloud ProjectsLaunch your next project with $300 in free Google Cloud credits—no strings attached. Test, build, and deploy without risk. Use your credits across the entire Google Cloud platform to find what works best for your needs. After your credits are used, continue with always-free tier services. Only pay when you're ready to scale. Sign up in minutes and start exploring.
-
1
Community Linux
USB Drive Writable Linux Distribution
Community Linux is a USB drive based fully functional writable Linux Distribution. It boots and runs with a comparable speed as a hard drive installation. Community Linux allows one to create a low cost solid state development and production platform. For new ComLin drive creation, one needs to download the full install (comlin-016.tar.gz) ... -
2
BlackLib
Beaglebone Black C++ Library
...It takes power from C++ language. It is created for reading analog input, generating pwm signal, using gpio pins, and communicating with other devices over uart, spi and i2c. In addition to them, it includes debugging feature. So you can check errors after call any function in the library. -
3
This project collects the software developed as part of the OSG Scalability, Reliability and Usability Area.
-
4
nosql-mongodb2013
10gen Education / MongoDB University courses of 2013
10gen Education / MongoDB University courses of 2013: "M101P: MongoDB for Developers", "M102: MongoDB for DBAs" and "M101J: MongoDB for Java Developers" - My code. -
Save Up to 91% on Cloud Compute With Spot VMsRun batch jobs at 60-91% off with Spot VMs. Long-running workloads get automatic discounts with sustained use.
-
5
NuxSFM (CLOSED)
A Arch Linux x86_64 distro for Structure From Motion
Pierre-Yves, August 2016 -
6
Firmware for Cypress' EZ-USB (AN2131) device that lets you use keyboards, mice etc. as USB compliant Human Interface Devices.
-
7
privacyidea
two factor authentication management system
privacyIDEA is a management and authentication system for two factor authentication. You can use OTP tokens, OTP cards, SMS, Smartphone Apps to incorparte the second factor. It can even manage SSH keys and supports Offline OTP. The latest version can manage and enroll user certificates. Its modular design makes it easily enhancable. It runs on Linux. Applications and workflows can be connected to privacyIDEA hence enabling two factor authentication in your system logon, web... -
8
rc522-python-script
This is a python program for the RFID reader rc522
This is a python program for the RFID reader rc522. it uses the bcm2835 libary and the rpi-rc522 library. Tutorial found here: http://bit.ly/1hYx5ao -
9
LinuxSA
Linux security assessment tool.
LinuxSA is a Python project that scans a remote or a local Linux machine for security vulnerabilities and then creates a report of the findings. The scan is read-only and no modifications are made to the target system. -
Earn up to 16% annual interest with Nexo.Generate interest, access liquidity without selling, and execute trades seamlessly. All in one platform. Geographic restrictions, eligibility, and terms apply.
-
10
Tux Hat Linux
What you see, is what you get! GNU/Linux Arch Based Distro
... # Tux Hat Linux Pastebin to use, modified, study, and learn from the source. http://pastebin.com/u/unixwz0r # Info: The Live ISO is under 700mb and can be put on a CD-R/DVD-R/USB and boot up on any x86 & x86_64 PC computers. Fluxbox has a simular config to FluxBSD, and Fluxbox has been updated to 1.3.7. # IRC Freenode: irc.freenode.net #bsdgeekclub @UNIXwz0r (owner) Tux Hat Linux Project # More Screenshots http://ipodpunker.deviantart.com -
11
Microcode update notification
Small startup script that notifies update info about CPU micorcode
Even a CPU has a little firmware inside. Since a lot of years it is possible to update it to fix little or bigger bugs. Usually this operation is done while updating your motherboard's BIOS, and the update is permanent. But thanks to the architecture of the linux kernel, we can update it at the last version every time we boot our OS. This is a really fast operation brought to you by microcode.ctl (in Ubuntu), and it permits to avoid waiting for an updated closed-source BIOS to solve bugs; it... -
12
appjump
re-route your executable
...You need appjump i.e. in these situations: - You will keep directories tidy (you just have appjump's exe file and an ini somewhere. not more). - You don't want to work with .lnk files. - You cannot use symlinks (i.e. on a FAT32 formatted USB stick or simply no admin privileges). -
13
This (Python) tool allows you to easily create FPGA bitfiles for your embedded system, from several Open Source IPs (compatibles with the OpenCores Wishbone bus) . It will also generates the corresponding drivers (currently only Linux ones).
-
14
OpenXenManager is a graphical interface to manage XenServer / Xen Cloud Platform (XCP) hosts through the network. OpenXenManager is an open-source multiplatform clone of XenCenter (Citrix). The source code can now be found on GitHub using the homepage link below
-
15
subnetcalculator
Basic subnet calculator written in Python.
Based on the IP address and subnet mask input from the user, the following values are calculated: #1. Network address #2. Broadcast address #3. Number of valid hosts #4. Wildcard mask #5. Number of mask bits (CIDR notation) #6. Random IP addresses from the subnet. -
16
netcfgtoolssh
Python script for pushing the same configuration on multiple devices.
...The script also checks if all the needed files exist, if all the IP addresses are valid and if all the devices are reachable. Tools used: Python 2.7.3, GNS3, Linux. -
17
GASiC
Genome Abundance Similarity Correction
One goal of sequencing based metagenomic analysis is the quantitative taxonomic assessment of microbial community compositions. However, the majority of approaches either quantify at low resolution (e.g. at phylum level) or have severe problems discerning highly similar species. Yet, accurate quantification on species level is desirable in applications such as metagenomic diagnostics or community comparison. GASiC is a method to correct read alignment results for the ambiguities imposed by... -
18
netcfgtooltelnet
Python script for pushing the same configuration on multiple devices.
...This feature can be further customized to prompt the user for them or read them from a file. The script also checks if all the needed files exist, if all the IP addresses are valid and if all the devices are reachable. Tools used: Python 2.7.3, GNS3, Linux. -
19
Arch-WiPi
Turn your Raspberry Pi into a wireless router/AP
...Boots in less than 10 seconds. 01-23-2014 – Installed bcmstat.sh to replace cpustatus.sh see usage below 01-22-2014 – Changed root login password for Pi to: archlinux Arch-WiPi is a tiny downloadable Arch Linux image for your Raspberry Pi. -
20
akiraLINUX
akiraLINUX - Linux für den Desktop
... - "akiraLINUX 14.1 on Lubuntu" - 32 Bit (basiert auf Lubuntu 14.04 LTS,Download unter http://stefanius.de/akiralinux-14-1-on-lubuntu-32bit-veroeffentlicht) - "akiraLINUX 14.1 on Xubuntu" - 64 Bit (basiert auf Xubuntu 14.04 LTS, Download unter http://stefanius.de/akiralinux-14-1-on-xubuntu-veroeffentlicht) - "akiraLINUX 14.1 on Zorin OS" - 64 Bit (basiert auf Zorin OS 9, das wiederum auf Ubuntu 14.04 beruht) Download unter http://stefanius.de/akiralinux-14-1-on-zorin-os-64bit-veroeffentlicht Alle Varianten verfügen über eine nahezu identische Softwareausstattung und wurden von mir speziell für (deutschsprachige) Linux Um- & Neueinsteiger konzipiert. akiraLINUX kann vom Anwender als Livesystem z. B. auf einem USB-Stick in Ruhe getestet werden. Mehr Informationen: http://stefanius.de/category/akiralinux -
21
batch-file-extension-renamer
A simple application that renames files from one extension to another
As a PHP developer I often find myself presented with a website where all the files are with a .html extension and I either have to manually rename all of the files or mess around with a shell. This tiny but powerful app takes away all that hassle. -
22
A HID interface component for LinuxCNC/EMC. HID is USB speak for Human Interface Device, that is, input/output USB devices such as joysticks, gamepads, CNC pendants. This component was built to support devices that weren't handled by stock LinuxCNC/EMC components.
-
23
netmonsql
Network performance monitoring and logging script for Cisco devices.
...It gathers parameters (CPU Utilization, Used Processor Memory, Used IO Memory, UP Ethernet Interfaces density, in percent velues) from Cisco routers by parsing command outputs and exports them to a MySQL database. NetMon_Query.py is a query script for the MySQL database in the form of an interactive menu for generating statistics. Tools used for coding and testing: Python 2.7.3, MySQL Server 5.5.37, GNS3, Linux. Tested on Cisco 1710, 2621, 2691, 3660, 3725, 7206 -
24
ospfdiscoverysnmp
OSPF network discovery script via SNMP.
...After providing necessary info and the OSPF info is gathered, the user has three choices: display the OSPF routers info on the screen, export the data to a file for Excel importing and generate the OSPF topology showing neighborships, router IDs and neighbor IPs. Tools used for coding and testing: Python 2.7.3, PySNMP, GNS3, Linux. Tested on Cisco 2621, 2691, 3660. -
25
dhcpclientsimulator
Both a DHCP client simulator and a DHCP attack tool.
#DHCP Client Simulator For the DHCP client simulator mode, assuming there is an active DHCP server on the network, the user can choose to simulate any number of DHCP clients. All DHCP leases obtained from the server are saved in the DHCP_Leases.txt file, which is automatically generated by the program. The user can also release the leases received from the server, either one by one (by IP address) or all of them at once. After releasing all the addresses, the DHCP_Leases.txt file is...