Search Results for "voip"

VoIPmonitor is open source network packet sniffer with commercial frontend for SIP SKINNY MGCP RTP and RTCP VoIP protocols running on linux. VoIPmonitor is designed to analyze quality of VoIP call based on network parameters - delay variation and packet loss according to ITU-T G.107 E-model which predicts quality on MOS scale. Calls with all relevant statistics are saved to MySQL or ODBC database. Optionally each call can be saved to pcap file with either only SIP / SKINNY protocol or SIP/RTP/RTCP/T.38/udptl protocols. ...

coturn is a free open source implementation of TURN and STUN Server. The TURN Server is a VoIP media traffic NAT traversal server and gateway.

Siproxd is a proxy/masquerading daemon for the SIP protocol. It allows SIP clients (softphones & hardphones) to work behind an IP masquerading firewall or router.

pcapsipdump is libpcap-based SIP sniffer with per-call sorting capabilities. It writes SIP/RTP sessions to disk in a same format, as "tcpdump -w", but one file per SIP session (even if there is thousands of concurrent SIP sessions). Getting started: http://pcapsipdump.sf.net/

...The goal of Xplico is extract from an internet traffic capture the applications data contained. For example, from a pcap file Xplico extracts each email (POP, IMAP, and SMTP protocols), all HTTP contents, each VoIP call (SIP, MGCP, MEGACO, RTP), IRC, WhatsApp... Xplico is able to classify more than 140 (application) protocols. Xplico cam be used as sniffer-decoder if used in "live mode" or in conjunction with netsniff-ng. Xplico is used also in CapAnalysis: http://www.capanalysis.net

TOFFEE-DataCenter is the new TOFFEE variant meant for Data-Center, Server, HPC, Load Balancing, Cluster/Cloud Computing and SDN deployments. With TOFFEE-DataCenter (and or TOFFEE), OEMs and other equipment vendors can make use of this platform/stack, integrate, port and build WAN Optimization devices/appliances on to their existing product range. Or build a dedicated WAN Optimization hardware product series via the same.

Application to remote control Polycom VVX IP phones via their web interface (using HTTPS). This application is initially intended to perform certain actions on phones running in Microsoft Lync mode. These actions include: * get device information * get status * sign in using PIN authentication * sign out * reboot * factory reset It also supports performing actions in batch reading data from a CSV file.

TurnServer is a implementation of Traversal Using Relay around NAT (TURN) protocol. This protocol allows a client to obtain IP addresses and ports from such a relay.

skiputler makes your Topcom "Butler 4012 USB VoIP" phone work on Linux and Mac OS X. It's a userspace driver which connects the phone to Skype.

Libre Software to manage audio/video connection from a PC to a libre hardware real time stethoscope hardware, developed to allow doctors make a remote diagnose in real time in isolated rural areas of developing countries or for medicine teaching

The goal of Xplico is to extract the applications data from an Internet traffic capture. For example, from a pcap file Xplico extracts each email (POP, IMAP, and SMTP protocols), all HTTP contents, each VoIP call (SIP), and so on. NFAT

A Load Balancer for a VoIP software on a Mobile Node device that choose among three net interfaces to send packages to an other Load Balancer on a Fixed Node. The LB's aim is to lose the lowest number of packages, choosing the best net interface.

Enable the Volume up and Down Buttons on Logitech USBHeadset. USB Headsets are very useful for VoIP applications like SIP Networks or Skype. It doesn't need X

Castadiva is a test bed based on low-cost off-the-shelf devices, which is used to test protocols developed for MANETs. Castadiva is completely compatible with the file format used by the ns-2 simulator.

The project is a preconfigured VoIP PBX VM Image based on Asterisk. But provides more advance features, such as LDAP integration, VQ monitoring via RTCP XR reports, LDAP user login, integrated billing system and telephone directory PDF generator.

Resources for the PePLink MANGA. This device with Linux embedded was marketed by PePLink (typically for Wifi and VoIP) until they withdrew it in early 2006. This project hosts the SDK, Debian image and other resources of interest to owners of this device.

This is a JavaOS software able to listen to or watch to VoIP sniffed communication. This software read libpcap file and it is able to discover VoIP-SIP session.

Ethereal Network Traffic Session Reconstruction for Internet Protocols. Management Console to reconstruct emails, web sessions, VOIP sessions, FTP, and all known supported Internet Protocols for Network Forensics. ***UPDATE*** Project release scheduled.

SIPatHome was based on the SIP Express Router (SER) which is a well-tested, configurable, free and RFC3261-compliant SIP proxy. The project was providing VoIP server software for the embedded Linux distribution OpenWRT on affordable Linksys WRT hardware.

UNIX billing system, for network servers, voip, etc.

A Simple Middlebox Configuration Protocol (RFC 4540) implementation for Linux. SIMCO is a signaling protocol that can be used by applications (such as SIP B2BUAs) to dynamically control firewalls and Network Address Translators (NATs).

OpenCALEA is a project whose goal is to develop comprehensive OpenSource based tools that can help the ISP/VoIP community to meet their CALEA compliance obligation.

EasyB2K is an effort to write a clean, easy-to-use interface for B2K telbox on linux. It aims to support multiple VOIP software through plugins.