Search Results for "pixel led software"
Sort By:
Showing 18 open source projects for "pixel led software"
View related business solutions-
MongoDB Atlas runs apps anywhereMongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
-
Earn up to 16% annual interest with Nexo.Generate interest, borrow against your crypto, and trade a range of cryptocurrencies — all in one platform. Geographic restrictions, eligibility, and terms apply.
-
1
Betaflight
Open Source Flight Controller Firmware
Betaflight is flight controller software (firmware) used to fly multi-rotor craft and fixed wing craft. This fork differs from Baseflight and Cleanflight in that it focuses on flight performance, leading-edge feature additions, and wide target support. Betaflight supports a wide range of flight controllers with at least an STM32F4 MCU. You can use nearly any piece of modern hardware out there. Full telemetry and high refresh rate for receivers, camera and VTX control, RGB LEDs, and much... -
2
Particle Firmware for the Electron, P1
Device OS (Firmware) for particle devices
The Photon uses an ARM Cortex M3 CPU based microcontroller. All of the code is built around the GNU GCC toolchain offered and maintained by ARM. The build requires version 5.3.1 20160307 or newer of ARM GCC and will print an error message if the version is older than this. In order to turn your source code into binaries, you will need a tool called make. Windows users need to explicitly install make on their machines. Make sure you can use it from the terminal window. The entire Particle... -
3
TFT_eSPI
Arduino and PlatformIO IDE compatible TFT library
An Arduino IDE compatible graphics and fonts library for 32-bit processors. The library is targeted at 32-bit processors, it has been performance-optimized for STM32, ESP8266 and ESP32 types. The library can be loaded using the Arduino IDE's Library Manager. Direct Memory Access (DMA) can be used with the ESP32, RP2040, and STM32 processors to improve rendering performance. "Four wire" SPI and 8 bit parallel interfaces are supported. Due to the lack of GPIO pins, the 8-bit parallel interface... -
4
Project to support Motorola Moto X 2014 And Other supported devices by Victara_Universe Team!
-
$300 in Free Credit Towards Top Cloud ServicesStart your project in minutes. After credits run out, 20+ products include free monthly usage. Only pay when you're ready to scale.
-
5
tech03
Multitasking MIPS32 M4K
Goal: test of tech01 portability to MIPS32 M4K core Target board: Olimex PIC32-PINGUINO-MX220 -
6
BrazilFW Firewall and Router
A powerful network security tool, easy, safe and totally free.
BrazilFW is a mini Linux distribution designed to be used as a Firewall and Router that runs easily on older computers. An old PC running BrazilFW is much more powerful and efficient than commercial software for routing in offices and residences running on a "powerful" computer. BrazilFW is based on Coyote Linux, which was designed by Joshua Jackson who discontinued Coyote Linux in version 2.24 in August 2005. In that same month comes on the scene BrazilFW Firewall and Router (BFW) with version 2.24, which is led by "Claudio" and "Marcelo - Brazil", running only on floppy disks, and being 2.30.1 the last version with this support . ... -
7
AnyPixel.js
A web-friendly way for anyone to build unusual displays
...AnyPixel.js’ straightforward hardware/software framework makes it easy to build any display where each pixel is an interactive element. We've included 12 example apps written by Googlers and friends for the 8th Avenue lobby display in NYC. To check them out, install the previewer and run one of the examples. Building your own app is easy with the Anypixel framework. To get started, check out the framework documentation and the example app. -
8
PowerLed
RGB power indicator
This is the software i created for controlling my PC's power indicator. The indicator has been replaced with an Arduino controlled RGB led. Core Temp is required and the Arduino code requires the CMD Messenger library. This software is in beta, and not 100% completed yet. -
9
HSK
High Speed Karlsruhe open automotive code initiative
Since the summer of 2010, the FSAE team High Speed Karlsruhe uses Infineon's XC878 to power its electronics. The XC878 is an 8052 compatible 8-bit µC. Our dedication is to 8-bit real time applications, guaranteed by the powerful peripherals of the XC878. This project aims to publish those portions of our code, which may be of use to a wider audience. -
Gemini 3 and 200+ AI Models on One PlatformBuild, govern, and optimize agents and models with Gemini Enterprise Agent Platform.
-
10
Pi Snowflake
A Raspberry Pi driven LED Snowflake
Initially this project started as hobby to build a "cool" christmas LED decoration. The result was 175 RGB LED snowflake driven by a Raspberry Pi. Since the hardware prototype is finished it's time to share the software and documentation... -
11
tech00
Technology project
Technology project. Goals: 1. CMSIS alternative implementation. 2. Custom MCU peripheral description. 3. Extended linker script. 4. Build time configuration. 5. Specific Makefile. Toolchain: Sourcery CodeBench Lite 2013.11-24 Target board: STM32VLDISCOVERY Functionality: As of now only test of core API and LED blinking. Might be used as application template. -
12
microDispatch
Microcontroller Task Scheduler
Super lightweight task scheduler aimed at 8 bit AVR ATmega micro-controllers (perfect for Arduino), although it can easily be used on other hardware like Microchip PIC. It uses simple round-robin scheduling so no priority levels can be set. You choose the time interval by calling dispatchTick(), this is usually in a timer interrupt. Range for number of tasks: 0 to 255 tasks Range for delay: 0 to 65535 ticks Each task only uses 5 byte of RAM. The one task LED blink example only uses... -
13
Hexplorer
Binary (hexadecimal) editor for Windows
Binary (hexadecimal) editor for Windows -
14
A Linux Library and GUI to control the Luxeed U7 LED Keyboard. Uses libusb 1.0 to communicate with the keyboard.
-
15
Tfpd aims to implement a test software for the small-sized FPD(Flat Pannel Display). The test software is based on the linux and it consists of device drivers and applications.
-
16
Keyboard Led Monitor can monitor the utilization of resources with the leds of the keyboard. Monitoring of CPU level, network traffic, memory and swap usage, and battery level are supported. The software can be used with game modes also, like bl.
-
17
A set of daemons to control software-controllable LEDs on Laptop computers to display various states.
-
18
cl-jpeg
JPEG encoder implementation using OpenCL
This is a research project to test GPU (OpenCL) usability for image compression. Jpeg format is chosen because it is relatively simple and I am familiar with it. 2013-01-22: For now only pixel conversion and DCT transform is done with OpenCL, entropy coding is done with CPU in one thread. Unfortunately this implementation is no match for even one threaded SSE2 jpeg encoder, too much data goes through PCIe. Look at "Debunking the 100X GPU vs. CPU Myth: An Evaluation of Throughput...
- Previous
- You're on page 1
- Next
