Search Results for "linux uart"

Open source cross platform flash program for the STM32 ARM microcontrollers using the built-in ST serial bootloader over UART or I2C

ChibiOS/RT is a free and efficient RTOS designed for deeply embedded applications. It offers a comprehensive set of kernel primitives and supports many architectures: ARM7, Cortex-M0, Cortex-M3, Cortex-M4, PowerPC e200z, STM8, AVR, MSP430, ColdFire, H8S, x86.

The program has been written in order to copy Atari 8-bit disks to ATR images on a PC. For this purpose the software emulates the behavior of an Atari SIO disk drive.

X-hyp free is a Open Source hypervisor based on a micro-kernel architecture with para-virtualisation. X-hyp is distributed under a GPLv2. X-hyp already has support ARM-9 Cortex-M3 and Cortex-A8 processor, has drivers for PL1x UART and is ready to use inside of QEMU versatile and realview and on a iMX25 development board. X-Hyp has support for several scheduler, POSIX FIFO, POSIX RR and Sporadic and it support GPOS or RTOS domains. Next steps are : - to add support for more...

This sketch makes the Arduino work as a GPIO interface for a computer, where input and output changes are transmitted in run-length encoding. Every time an input pin changes, the Arduino sends the new values of the input pins and the time since the last change. In a similar way, the Arduino can be programmed a sequence of output pin changes, each specified by the new values of the output pins and the time since the previous change. Three application programs are included: the first makes...

PK2Aux is a library and suite of command-line utilities for using the Microchip PICkit2 programmer device for purposes other than programming (such as the generic pin controls, serial UART, and logic analyzer modes provided by the Windows software).

A simple Embedded System Framework that allows rapid development of applications build for AVR family. System is based on a super-loop architecture with check and skip (no-wait) flag event driver system. Supports: UART, SysTick Timer, ADC, SPI, EEPROM, PWM. Also supports: Xilinx FPGA configuration, FPGA SSI interface, smart card reader etc. Tested partially (different modules in each case) on ATMega163/16/32/323/8. Awards CodeProject 2010, Third Prize, Hardware and Device...

Set of various C-routines for Atmel AVR MCUs, packed in several libraries, with fancy Makefile system for easy integration with user projects. Contains functions for UART, SPI, HD44780 or T6963C LCD\'s, Dallas 1-Wire bus, AVR bootloader and more.

This is a simple command line tool to customize CP2103 USB to UART bridge controllers in home-grown hardware. VID, PID, product name string, serial number string, and release version of the device can be changed next to GPIO port modes.

Tiny Shell provides the minimum you need to implement shell facilities into a small system. For instance, add a shell to your embedded platform as soon as you can read/write bytes from the UART.

This is a driver module for linux written in C language for the 310 apsx rfid reader. This device use the communication via uart (interrupt based) for dialect with a normal pc.