Search Results for "linux uart"
Sort By:
Showing 16 open source projects for "linux uart"
View related business solutions-
$300 Free Credits to Build on Google CloudPut your $300 in credit toward real workloads, then keep building with free monthly usage for 20+ products. No commitment and no charge until you upgrade.
-
Build Data Resilience - Take the Assessment TodayIs your recovery strategy as strong as you think? Take this quick self-assessment to check your recovery readiness and gain tailored insights. In only 2 minutes, you'll learn where you fall on the recovery readiness scale.
-
1
ch32fun
Open source minimal stack for the ch32 and ch5xx WCH RISC-V
...Its minichlink programmer supports several debug adapters and can provide GDB-style debugging and single-wire printf output. Applications can use simple GPIO, timing, ADC, interrupt, and UART helpers without adopting a full vendor SDK. The environment works on native Windows, Linux, and WSL with RISC-V GCC toolchains. Its small runtime is particularly suited to low-cost microcontrollers with very limited flash and RAM. -
2
stm32flash
Open source flash program for STM32 using the ST serial bootloader
Open source cross platform flash program for the STM32 ARM microcontrollers using the built-in ST serial bootloader over UART or I2C -
3
ChibiOS/RT is a free and efficient RTOS designed for deeply embedded applications. It offers a comprehensive set of kernel primitives and supports many architectures: ARM7, Cortex-M0, Cortex-M3, Cortex-M4, PowerPC e200z, STM8, AVR, MSP430, ColdFire, H8S, x86.
-
4
mini-rv32ima
A tiny C header-only risc-v emulator.
...Its core implementation is only a few hundred lines and emulates the RV32IMA instruction set together with selected CSR, CLINT, and MMIO behavior. The emulator intentionally omits an MMU and other specification features that are unnecessary for its minimal Linux target. Despite its size, it can boot a no-MMU Linux environment and run user applications. A compact demonstration wrapper provides UART, kernel loading, device-tree loading, command-line interaction, and basic system control. The design is dependency-free at its core, easily embeddable, and deliberately structured so developers can extend instructions, registers, and device behavior. -
Ship Agents FasterGemini Enterprise Agent Platform lets you rapidly build, scale, govern and optimize production-ready agents grounded in your organization's data. The platform enables developers to build custom or pre-built agents for virtually any use case. New customers get $300 in free credits.
-
5
asioemu
Atari 8-bit disk emulator
The program has been written in order to copy Atari 8-bit disks to ATR images on a PC. For this purpose the software emulates the behavior of an Atari SIO disk drive. -
6
ocapi
C-level driver collection for MSP430 and derivatives
ocapi is an open source driver collection for MSP430 and derivative processors. It provides a C language application programming interface (API) for deploying individual processor capabilities. Current modules support serial communication via UART, I2C and SPI, digital I/O (GPIO), analog-to-digital conversion (ADC), Timers and so on. ocapi aims at being independent of the development host platform. So it should work, no matter if you live in the Windows, Linux or Mac world. ocapi is used as the hardware abstraction layer for the MSP430 port of the Takatuka Java virtual machine (JVM). ... -
7
x-hyp free
X-hyp free Hypervisor
X-hyp free is a Open Source hypervisor based on a micro-kernel architecture with para-virtualisation. X-hyp is distributed under a GPLv2. X-hyp already has support ARM-9 Cortex-M3 and Cortex-A8 processor, has drivers for PL1x UART and is ready to use inside of QEMU versatile and realview and on a iMX25 development board. X-Hyp has support for several scheduler, POSIX FIFO, POSIX RR and Sporadic and it support GPOS or RTOS domains. Next steps are : - to add support for more... -
8
RunLengthGPIO
a computer interface to the Arduino I/O digital lines
This sketch makes the Arduino work as a GPIO interface for a computer, where input and output changes are transmitted in run-length encoding. Every time an input pin changes, the Arduino sends the new values of the input pins and the time since the last change. In a similar way, the Arduino can be programmed a sequence of output pin changes, each specified by the new values of the output pins and the time since the previous change. Three application programs are included: the first makes... -
9
PK2Aux is a library and suite of command-line utilities for using the Microchip PICkit2 programmer device for purposes other than programming (such as the generic pin controls, serial UART, and logic analyzer modes provided by the Windows software).
-
Earn up to 16% annual interest with Nexo.Generate interest, borrow against your crypto, and trade a range of cryptocurrencies — all in one platform. Geographic restrictions, eligibility, and terms apply.
-
10
Data Over Fiber
UART Data Communication Over a Fiber Network
This project investigated how fiber optic systems can be utilized for data communications. To further understanding of such, an investigational Universal Asynchronous Receiver Transmitter (UART) fiber optic model was developed and tested. -
11
CyberZone-HIDJoin
Several joysticks connected to UART/LAN
USB-equipped SOHO router transfers data from several joystics to UART -
12
AVRILOS
Simple AVR OS
A simple Embedded System Framework that allows rapid development of applications build for AVR family. System is based on a super-loop architecture with check and skip (no-wait) flag event driver system. Supports: UART, SysTick Timer, ADC, SPI, EEPROM, PWM. Also supports: Xilinx FPGA configuration, FPGA SSI interface, smart card reader etc. Tested partially (different modules in each case) on ATMega163/16/32/323/8. Awards CodeProject 2010, Third Prize, Hardware and Device... -
13
Set of various C-routines for Atmel AVR MCUs, packed in several libraries, with fancy Makefile system for easy integration with user projects. Contains functions for UART, SPI, HD44780 or T6963C LCD\'s, Dallas 1-Wire bus, AVR bootloader and more.
-
14
This is a simple command line tool to customize CP2103 USB to UART bridge controllers in home-grown hardware. VID, PID, product name string, serial number string, and release version of the device can be changed next to GPIO port modes.
-
15
Tiny Shell provides the minimum you need to implement shell facilities into a small system. For instance, add a shell to your embedded platform as soon as you can read/write bytes from the UART.
-
16
This is a driver module for linux written in C language for the 310 apsx rfid reader. This device use the communication via uart (interrupt based) for dialect with a normal pc.
- Previous
- You're on page 1
- Next
