Search Results for "kernel module"
Sort By:
Showing 112 open source projects for "kernel module"
View related business solutions-
Full-stack observability with actually useful AI | Grafana CloudBuilt on open standards like Prometheus and OpenTelemetry, Grafana Cloud includes Kubernetes Monitoring, Application Observability, Incident Response, plus the AI-powered Grafana Assistant. Get started with our generous free tier today.
-
Go From AI Idea to AI App FastAccess Gemini 3 and 200+ models. Build chatbots, agents, or custom models with built-in monitoring and scaling.
-
1
NVIDIA Linux Open GPU Kernel Module
NVIDIA Linux open GPU kernel module source
This is the source release of the NVIDIA Linux open GPU kernel modules, version 530.41.03. Note that the kernel modules built here must be used with GSP firmware and user-space NVIDIA GPU driver components from a corresponding 530.41.03 driver release. Currently, the kernel modules can be built for x86_64 or aarch64. If cross-compiling, set these variables on the make command line. Any reasonably modern version of GCC or Clang can be used to build the kernel modules. Note that the kernel... -
2
Squashfs is a highly compressed read-only filesystem for Linux. Squashfs compresses both files, inodes and directories, and supports block sizes up to 1Mbytes for greater compression. It is implemented as a kernel module under VFS.
-
3
emu3fs
Linux kernel module for the EMU3 filesystem
emu3fs is a linux kernel module that allows to read from and write to disks formatted in an E-MU emu3 sampler family filesystem. The samplers using this filesystem are the emulator 3, emulator 3x and the ESI family. -
4
CDemu - a virtual CD/DVD drive for Linux. Project includes Linux kernel module & userspace utilities.
-
$300 in Free Credit Towards Top Cloud ServicesStart your project in minutes. After credits run out, 20+ products include free monthly usage. Only pay when you're ready to scale.
-
5
stegfs is a steganographic file system in userspace. It uses the FUSE module which allows it to be incorporated into more than just the Linux Kernel, i.e. it's also known to work in FreeBSD :) For more details visit: https://albinoloverats.net/projects/stegfs
-
6
mbpfan
A simple daemon to control fan speed on all MacBook/MacBook Pros
mbpfan is a lightweight daemon for Linux that provides fan speed management for MacBook and MacBook Pro hardware. It reads temperature data via the coretemp kernel module and drives fan speeds through the applesmc interface, making it especially valuable for users running Linux natively on Apple hardware where automatic thermal control may be lacking. The daemon supports multiple processors and multiple fans, allowing flexible configurations for complex Mac models, and aims to keep systems both cool and quiet by dynamically adjusting fan behavior. ... -
7
RapidDisk is a Linux kernel module to dynamically create, remove, and manage RAM disk volumes. Ramdisks are a method by you which can allocate parts of your RAM for high performing file data storage.
-
8
Linux null-modem emulator
tty0tty is a kernel-module virtual serial port driver for Linux.
The Linux null-modem emulator (tty0tty) is a kernel-module virtual serial port driver for Linux. This create virtual tty ports pairs and use any pair to connect one tty serial port based application to another. There are a version using pseudo-terminal (UNIX 98 style). -
9
Casper-fs
Casper-fs is a Custom LKM generator to protect and hide files.
Casper-fs is a Custom Hidden Linux Kernel Module generator. Each module works in the file system to protect and hide secret files.The motivation: An attacker can read every file in your machine in a bad situation. But if you have a Casper-fs custom module, the attacker will not find the hidden kernel module that has functions to turn any file invisible and protect to block read/remove/edit actions. -
Our Free Plans just got better! | Auth0You asked, we delivered! Auth0 is excited to expand our Free and Paid plans to include more options so you can focus on building, deploying, and scaling applications without having to worry about your security. Auth0 now, thank yourself later.
-
10
openPOWERLINK
An Open Source POWERLINK Stack
...With version 2.0, the source code has been cleanly split into an application-oriented user library and a time-critical stack driver. The latter may be moved to a dedicated communication processor or into a kernel module to deliver enhanced performance while still keeping the API in user space. A full documentation of the stack is available on the web site: http://openpowerlink.sourceforge.net The following page can be used to report a security vulnerability: https://sourceforge.net/p/openpowerlink/discussion/ -
11
KISS'EM
An little operating system
KISS'em is an written in C, delivering something similar to object by kernel. Each kernel module could create object and one object could have many interfaces. For example filesystem could be accessed as an file (block device) or as filesystem, referencing to the same object. KISS'em will have webassembly support with support swap webassembly program memory. -
12
keysniffer
Linux kernel mode debugfs keylogger
A Linux kernel module to grab keys pressed in the keyboard, or a keylogger. keysniffer was initially written with the US keyboard (and conforming laptops) in mind. By default it shows human-readable strings for the keys pressed. However, as keyboards evolved, more keys got added. So the module now supports a module parameter codes which shows the keycode shift_mask pair in hex (codes=1) or decimal (codes=2). -
13
NetFlow/IPFIX iptables module
NetFlow iptables module for Linux kernel
ipt-netflow is high performance NetFlow exporting module for Linux kernel (up to 4.15). Designed for Linux router in high-throughput network. This is netfilter/iptables module adding support for -j NETFLOW target. Designed to work efficiently w/o conntrack. Supporting NetFlow protocols v5, v9, and IPFIX. Accounting for IPv4, IPv6 traffic, and NAT translation events (NEL). Additional options is SNMP-index translation rules, aggregation rules, Ethernet type, MPLS, VLAN, and MAC addresses exporting. -
14
usb-md
modified Linux USB driver kernel module
modified USB driver for teaching purpose -
15
SLFS
Simple Log Structured Filesystem for Linux
SLFS is a implementation of log-structured file system designed for flash memory based storages(SSD, SD card, eMMC, …). Like other log-structured file systems, SLFS shows good performance under random write. <Build> 1. deploy SLFS source code at your Kernel Source # tar xzf slfs.tar.gz # mv slfs KERNEL_SRC/fs/. # vi KERNEL_SRC/fs/Makefile (add following line) obj-$(CONFIG_SLFS_FS) += slfs/ # vi KERNEL_SRC/fs/Kconfig (find section “MISC_FILESYSTEMS” and add following line) source "fs/slfs/Kconfig" 2. build Linux Kernel # cd KERENL_SRC # make menuconfig (check SLFS as a module or built-in) # make && make modules_install Note. ... -
16
W-Bus library and applications
W-Bus communication library
This is a small library that allows comunicating with a Webasto (tm) W-Bus capable car heating system. Runs on Personal Computers or for embedded devices (slim design). Easily portable. Includes a Heater manager, heater controller program and more. The GIT repository (CVS is deprecated) also includes a control unit application to control W-Bus capable devices, a W-Bus compatible heater unit firmware application and a heater simulator for testing purposes. Also, a serial port loop back... -
17
rtl2832-entropyd
Use an rtl2832 USB dongle to generate random data for the linux kernel
...The kernel already has a module to use the rtl2832 for its intended purpose, listening to radio, so if you want to use it to generate entropy, you will have to blacklist that module, so it doesn't load. If it is loaded, this program will not be able to acquire the rtl2832 device, and won't run. Create the file /etc/modprobe.d/blacklist-dvb_usb_rtl28xxu.conf with the line blacklist dvb_usb_rtl28xxu in it. -
18
NetFireCoRE
Network Firewall Linux Kernel Module with Conflict Resolution Engine
We implement an open source conflict resolution framework that consists of a user-space C application that automatically resolves firewall rules anomalies, and b) a generic tree (called policy tree), implemented as a Linux kernel module which maintains the resolved firewall rules and enables the necessary hooks to netfilter for matching incoming (or outgoing) network packets. Tree-based data structures offer improved efficiency compared to traditional access control lists (e.g. iptables or nftable maps), especially for large systems with a huge number of rules. ... -
19
experix laboratory control system
instrument control, data acquisition display and analysis
...Tested on PC and Raspberry Pi. The core is written very generally in order to support applications by means of script files. Device interfaces: PCMCIA daq (2 devices tested) via kernel module with interrupt handler and memory-mapped data; USB daq (1 device tested) using libusbx; running an equipment servicing program via pipes. Interfaces accessible via commands and scripts: file i/o modelled on stdio and stdlib; usb control and bulk transfers; socket operations; webcam; graphics via framebuffer. Applications (not all available yet for download) include: cell poker (like an atomic force microscope); tissue mechanical tester; fluorescence photobleaching; alternating laser excitation fluorescence; fluorescence intensity distribution analysis; iverilog simulation analysis. -
20
hybrid storage
A Hybrid Drive (SSD + HDD) for Linux
HYBRID is a tiered cache module running in Linux. In other words, It is a hybrid storage that consists of SSD and HDD. It makes SSD a fully durable and persistent read/write cache. It guarantees persistency and consistency of dirty data even at a crash or a power failure using general SSDs. It quickly recovers the flash cache without any data loss. It is implemented as a Linux kernel module. -
21
stakka_klm
Kernel module to manage Disc Stakka Units
Kernel Loadable Module to interface with the Disc Stakka units. Other devices to be implemented if/when I can get my hands on them. Objective is to separate the user application from the tedious management of the device (eg. constant polling to prevent their reset function, USB interaction requirements). A /dev device is created per chain through which applications can read/write status and commands. -
22
ext2 info hiding mod
Information Hiding Modification for EXT2
This modification of the ext2 kernel module allows to create files (cover files) whose block arrangement gets manipulated to represent a binary code, which can be extracted later. The information hiding approach used in this project was introduced by Khan et. al in 'Designing a cluster-based covert channel to evade disk investigation and forensics' (1st approach). -
23
Flashmon
Onboard NAND flash operations monitor for embedded Linux
Flashmon is a Linux kernel module that monitors NAND flash memory access events using Kprobes and Jprobes. Flashmon targets embedded boards shipped with bare flash chips managed with MTD : mainly JFFS2, UBIFS and YAFFS based systems. The monitored events are : flash page read / write requests, and flash block erase operations. Instructions on how to use Flashmon are included in the archive. -
24
This project is a Linux Kernel 2.4/2.6/3.x module/console program for changing wireless radio status on the Fujitsu Siemens AMILO A1655G laptop.
-
25
nat64 Linux kernel module
It is an implementation of nat64 in kernel space
Mutarjem is a linux kernel loadable module can be added to linux kernel. It is an implementation of nat64 in kernel space. It can be loaded to a firewall kernel to connect only IPv6 network to IPv4 internet.
