Search Results for "eeprom"

OpenBLT is mostly used as an STM32 bootloader, due to the popularity of STM32 microcontrollers. However, the bootloader’s architecture is such that it can work with any microcontroller and use any type of communication interface to perform firmware updates.

AVR ATmega port of freeRTOS A port of freeRTOS which can be flexibly flexibly configured use almost any available Timer on AVR ATmega devices and will operate with almost any classic Arduino device from Arduino, SeeedStudio, Sparkfun, Freetronics or Pololu. Going forward this repository will be updated less often and only with major releases. Please check at Github for the latest commits. https://github.com/feilipu/avrfreertos The Goldilocks Analogue story is told here....

This Arduino library is a native Apple HomeKit accessory implementation for the ESP8266 Arduino core and works without any additional bridges. This project is mainly based on an esp-home kit for ESP-OPEN-RTOS. I ported the RTOS-based implementation of the esp-home kit to the pure Arduino environment, aimed at easy and fast building projects using Arduino IDE (or Eclipse with sloeber, PlatformIO). Enjoy the "one-key" build, "one-key" upload, and work to link various other Arduino libraries...

ztex is a Firmware Kit with a corresponding Driver API for EZ-USB based hardware. The Firmware is written in C and assembled using a powerful macro processor. The Driver API allows the development of platform-independent device drivers.

Firmware for small µController board with 4x PT1000 temperature channels which control the temperature in one room via two fan units. PIC18F4455 based hardware. Can be used to control temperature in the basement or guest house, within a computer case, etc.

A simple Embedded System Framework that allows rapid development of applications build for AVR family. System is based on a super-loop architecture with check and skip (no-wait) flag event driver system. Supports: UART, SysTick Timer, ADC, SPI, EEPROM, PWM. Also supports: Xilinx FPGA configuration, FPGA SSI interface, smart card reader etc. Tested partially (different modules in each case) on ATMega163/16/32/323/8. Awards CodeProject 2010, Third Prize, Hardware and Device Programming Check the Wiki Page for more details.

EERPOM programming software for FTDI USB<=>Serial convertors configuration EEPROM. Can read/write/erase eeprom with ftdi convertor, save/load configuration file

Atmel AVR microcontroller In-System-Programming solution for Palm OS. Provides GUI to upload, download and verify flash ROM and EEPROM images and edit fuse bit settings. Supports the AVR ISP, STK500, AVR910, and Butterfly programmers.

PalmPIC is a Microchip PIC programmer running on PalmOS compatible devices. You can read, write and verify PIC16 series FLASH ROM and EEPROM memory. Complete hardware/software portable solution.

An universal programmer for EPROM/EEPROM/FLASH chips (27Cxx/28Fxx/29Fxx), Microchip PIC and Atmel Microcontrollers, Serial EEPROM (24Cxx,93Cxx,25xx,others), JTAG interface, and other devices. Configurable to support virtualy any device.

This software can be used to enter the bootstrap mode on Sagem (TM) GSM mobile phones and execute some program on their internal CPU. This might be useful for writing into the flash memory, repairing EEPROM contents or just for educational purposes.