Search Results for "eda"

gpsim is an open sourced simulator for Microchip's PIC microcontrollers. It supports all three families of PICs: 12-bit, 14-bit, and 16-bit cores. See also gputils http://gputils.sourceforge.net/

UrJTAG aims to create an enhanced, modern tool for communicating over JTAG with flash chips, CPUs, and many more. It is a descendant of the popular openwince JTAG tools with a lot of additional features and enhancements.

The “lpACLib” library contains the VHDL description of accurate and approximate versions of several arithmetic modules (like adders and multiplier of different bit-widths) and accelerators. Moreover, it also provides the corresponding software behavioral models/implementations developed in C and MATLAB to enable quality characterization. Besides our novel designs, it also contains implementations for several state-of-the-art arithmetic modules and their approximate versions. This open-source...

This (Python) tool allows you to easily create FPGA bitfiles for your embedded system, from several Open Source IPs (compatibles with the OpenCores Wishbone bus) . It will also generates the corresponding drivers (currently only Linux ones).

ArchC is an open-source architecture description language based on SystemC. Its goal is to provide designers with a tool to evaluate new ideas in processor and ISA design, memory hierarchy, etc. and other aspects of computer architecture research.

* Model-checking/simulation-checking library for real-time system with dense-time models in C with CRD (Clock-Restriction Diagrams) technology. * Parametric analysis library for linear-hybrid systems in C with HRD (Hybrid-Restriction Diagram) technol

FpgaC compiles a subset of the C language to net lists which can be imported into an FPGA vendors tool chains. C provides an excellent alternative to VHDL/Verilog for algorithmic expression of FPGA reconfigurable computing tasks. More info in wiki.

This is a Traffic Light with capability of controlling 4 sets of Lamps and Passengers light with one Counter and LCD for displaying the Time for every set of red light.

The ixo.de USB JTAG pod and firmware allows to access JTAG-capable chips via USB and a protocol like Altera USB-Blaster.

All design related files for a general purpose PCB, hosting a Microchip dsPIC33FJ256MC710 part. Includes gEDA schematic and layout files, BOM, etc... The card will include power regulation, SD memory card, in-circuit programming support, etc...

The primary aim of this project is to develop a full featured Microblaze simulator . The project is develloped only in C , then it can be easely ported.

OpenVGA is an free and open FPGA-based implementation of a VGA compatible graphics adapter, and utilising low-cost hardware. The project includes the PCB schematic and artwork, Verilog HDL, firmware assembly code, and driver source code.

SDBoot is a complete bootloader solution (MCU side and PC side), free, with source code for AVR MCU chip. It features a checksumed protocol for safe programming.

HW(VHDL) and SW of logic analyzer and On-Chip-Verification(OCV) for Value Change Dump(VCD) file format that exported to seemd SystemC ,ModelSIM, and many other EDA tools. Very easy and Simple.

SECU86 is Standard Engine Control Unit x86. The project goal is to develop a standard computer and OS (opensource) that would work on any car. It'll be based on the x86 processor and will try to replace the poor standard ECU that comes with any car.

SIMACH is a Emulator Development Kit. The goal is to develop a IDE that'll allow a developer to easily write and debug a highly portable emulator, automaticly generating code to the destination plataform.

This project is aimed to develop an Hardware Monitor & Protection System for PCs using PICmicros. This project is divided into two branches: the first one involves microcontroller's firmware, the second one software used to manage the PIC via COM po

An open-source Windowslibrary for low-level parallel port access. Does not require installation of any drivers. Emulates API of most commonly used solutions.

PPort is a simple yet handy automation program and its documented counterpart for interfacing a PC with external devices. With this bundle, one can control any household appliance or electronic device with minimal hassle and practically no changes

A cross-platform simulator for embedded systems, with a plug-in architecture for adding microcontrollers and other devices. Written in C for maximum compatibilty and speed. Currently has support for AVR AT90S8515 and ATmega128.

Scripting Tcl interface to Qt multiplatform library

SDL REFLEX is the micro kernel of a real time operating system for the AVR microcontroller family. The kernel is especially designed to implement systems described in SDL – “The Specification and Description Language” . Compiler GNU ANSI-C for AVR v.3.3

RSTK is a C language program that generates Reed-Solomon HDL source code modules that can be compiled and synthesized using standard VHDL or Verilog compilers and synthesis tools.

"DSO" is a Digital Signal Oscilloscope. My DSO will be connected via the USB to the PC. All software to operate the DSO is developed within this project.

Portatux is an interactive ncurses interface as well as a command line tool for controlling the 8 data pins in the parallel port in Linux and FreeBSD.