Search Results for "temperature sensor"

...It provides real-time insights into key system metrics such as temperatures, fan speeds, voltages, load percentages, and clock speeds by reading directly from sensors embedded in CPUs, GPUs, motherboards, and storage devices. The tool supports a wide range of sensor hardware found on modern systems, including Intel and AMD processors, NVIDIA and AMD graphics cards, SMART temperature sensors on storage drives, and many motherboard monitoring chips. Users can view monitored data directly within the application, as customizable desktop gadgets, or through a system tray interface, making it easy to keep an eye on system health at a glance. ...

This library implement RIMS controls for home brewers. For definition of a RIMS, see https://tinyurl.com/j3lyuyc For me, an Arduino micro controller + a LCD Keypad shield was cheaper and a lot more customizable than a commercial PID controller. So, with this library, a commercial PID controller is unnecessary. Automatic PID tuning toolkit is also included. Temperature can be read with a thermistor, a resistance temperature detector (RTD) or any custom temperature probe. Heater is...

This is a Sketch for the arduino IDE to enable the usage of a DHT22 sensor connected to a NodeMCU (ESP8266) with MQTT. Also supported are 2 status LED's and a SPI diaplay. After start the sensor device, there will be a Wifi-AP for configuration purposes. After successfully configuration, the sensor is connected as a Wifi-client and send the temperature and humidity data via MQTT within the given intervall.

My project of ethanol conversion kit for gasoline cars. Project is based on firmware for bioadapter, but here i design my own HW. Biggest advance is use of temperature sensor to modify cranking maps in cold weather.

WARNING: DRAFT VERSION FOR HARDWARE TEST PURPOSE! The intend of this project is mainly to control a 5 channel LED light and to remotely monitor the LED heatsink and water temperature. The LED light simulate random cloud, random lightning during cloud and also manage sunrise and sunset. The system is composed of an Arduino mega 1280, an ethernet shield w5100, an LCD keypad shield 1602, a 3,2" TFT touchscreen, a RTC module DS1307 and 3 DS18B20 one wire temperature sensor. Up and running: -16x2LCD display and menu to manage clock, cloud and lightning setup...