Search Results for "temperature sensor"

...It provides real-time insights into key system metrics such as temperatures, fan speeds, voltages, load percentages, and clock speeds by reading directly from sensors embedded in CPUs, GPUs, motherboards, and storage devices. The tool supports a wide range of sensor hardware found on modern systems, including Intel and AMD processors, NVIDIA and AMD graphics cards, SMART temperature sensors on storage drives, and many motherboard monitoring chips. Users can view monitored data directly within the application, as customizable desktop gadgets, or through a system tray interface, making it easy to keep an eye on system health at a glance. ...

This library implement RIMS controls for home brewers. For definition of a RIMS, see https://tinyurl.com/j3lyuyc For me, an Arduino micro controller + a LCD Keypad shield was cheaper and a lot more customizable than a commercial PID controller. So, with this library, a commercial PID controller is unnecessary. Automatic PID tuning toolkit is also included. Temperature can be read with a thermistor, a resistance temperature detector (RTD) or any custom temperature probe. Heater is...

This is a Sketch for the arduino IDE to enable the usage of a DHT22 sensor connected to a NodeMCU (ESP8266) with MQTT. Also supported are 2 status LED's and a SPI diaplay. After start the sensor device, there will be a Wifi-AP for configuration purposes. After successfully configuration, the sensor is connected as a Wifi-client and send the temperature and humidity data via MQTT within the given intervall.

.... * BeagleBone or similar (Angstrom v2011.12-core - Kernel 3.1.0+). * DB18B20 temperature sensor. * For the PC client, Python 3.3 or better is needed in addition to matplotlib.

Application was designed for visualization of measurement flow. Measurements should been taken from Melexis mlx90614 contactless temperature sensor by Arduino_Uno_Rev.3 board and then by means of serial port connection sended to PC. Application simply listen appropriate COM port and visualize measurements. You can find a sketch for the Arduino board on project homepage.

My project of ethanol conversion kit for gasoline cars. Project is based on firmware for bioadapter, but here i design my own HW. Biggest advance is use of temperature sensor to modify cranking maps in cold weather.

Alternate firmware for bioadapter kit. Kit is used to adjust injectors for E85 fuel in gasoline cars.

WARNING: DRAFT VERSION FOR HARDWARE TEST PURPOSE! The intend of this project is mainly to control a 5 channel LED light and to remotely monitor the LED heatsink and water temperature. The LED light simulate random cloud, random lightning during cloud and also manage sunrise and sunset. The system is composed of an Arduino mega 1280, an ethernet shield w5100, an LCD keypad shield 1602, a 3,2" TFT touchscreen, a RTC module DS1307 and 3 DS18B20 one wire temperature sensor. Up and running: -16x2LCD display and menu to manage clock, cloud and lightning setup...

mung is "monitor using ncurses, g++" and it's mostly an experiment for learning about ncurses. It runs in a terminal and displays temperature sensor info in real time on a color scale.

Linux version of software for handling USB temperature and humidity sensor from pcsensor.cn (http://www.pcsensor.cn/english/product.asp?id=66).