Search Results for "stepper"

We live in very exciting times 😃! BLDC motors are entering the hobby community more and more and many great projects have already emerged leveraging their far superior dynamics and power capabilities. BLDC motors have numerous advantages over regular DC motors but they have one big disadvantage, the complexity of control. Even though it has become relatively easy to design and manufacture PCBs and create our own hardware solutions for driving BLDC motors the proper low-cost solutions are yet...

...This meant using widely available materials and avoiding any tooling with a high upfront cost. Following that philosophy, the design uses store-bought vinyl stickers for the letters, is driven by an ubiquitous and cheap 28BYJ-48 stepper motor, and uses common PVC ID badge cards cut to shape for the flaps (though custom die-cut flaps are also available). Even the enclosure, spool, and gears, which are all made from laser-cut MDF, can be easily ordered online.

...(c) Robert Brown 2014-2025, Holger M, 2019-2021. All rights reserved. Code or portions of code may not be copied or used without appropriate credit given to authors. Spreadsheet to calculate what stepper motor to use. https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/Documentation/Nema-Stepper-Motors.xlsx/download Spreadsheets to calculate CFZ https://sourceforge.net/projects/myfocuserpro2-esp32/files/CFZ%20Spreadsheets/CFZ%20Spreadsheets.zip/download Focuser Basics Guide (PDF) - shows how to derive the correct motor requirements for your system (mandatory reading) https://sourceforge.net/projects/myfocuserpro2-esp32/files/Documentation/Focuser%20Basics.pdf/download https://youtu.be/90KeSspN3e0

myFocuserPro2 (myFP2) is an ASCOM - INDI - LINUX - WINDOWS telescope focuser with a large range of options. 309,000+ file downloads. The most popular focuser project. (c) Copyright Robert Brown 2014-2025. All Rights Reserved. Code or portions of code may not be copied or used without written permission from the author. Other Focuser Projects myFP2ESP32 WiFi - https://sourceforge.net/projects/myfocuserpro2-esp32/ [ESP32 Only] myFP2ESP8266 WiFi - ...

myFocuserPro is an ASCOM and Moonlite compatible stepper motor telescope focus controller (DIY) based on Arduino Nano/Uno. A popular DIY ASCOM focuser with more than 121,000+ downloads. (c) Copyright Robert Brown 2014-2024. All Rights reserved. Permission is granted for personal and Academic use only. Spreadsheet to calculate what stepper motor to use. https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/Documentation/Nema-Stepper-Motors.xlsx/download

...The latest version of the code is available at https://github.com/rkaczorek/astroberry-diy !!! Astroberry provides INDI drivers for Raspberry Pi devices such us Astroberry Focuser - stepper motor driver with autospeed feature, Astroberry GPS - GPS driver for scope location and time synchronization, Astroberry AltIMU - accelerometer, magnetometer, gyro, atmospheric pressure sensor driver, Astroberry Board - power switch board allowing for remote powering on/off up to 4 devices.

This is a project of IR-spectrometer controller. It based on STM32F103 chip with a lot of peripheral devices (1-wire thermometers, stepper motors, platinum thermistors and so on). In future I hope to add here schematics of full control system for this device.

Roundhouse is a pair of C based embedded software applications to drive model railroad stepper motor based turntables. It consists of a stepper motor code and controller code connected by an I2C network. Written in C for PIC18/PIC16s processors.

Parallel Port Control Made Easy - parashell allows control of a PC parallel port (input and output) with simple command line arguments. The simplicity of these programs make it very easy to use in scripts. Control stepper motors, Relays, LEDs, etc...

SpinDrive is a Parallax Propeller Chip-based engine control system.

Software which runs on a gunstix overo, to contron stepper motors, and servos in such a way that they play the piano. The actual stepper motor and servo driver are done on an FPGA board from knjn.com (pluto-3).

Stepper Motor Controller driver for Linux

The main purpose is to develop a Linux stepper motor driver module to drive two unipolar stepper motors using the parallel port. This driver has the task to enable a home-made robot to move around and uses the tank-principle to move and turn.

The LibMotionControl combines different serial protocols of external motion controllers to one generic interface. It is already implemented for one DC-motor (Maxon ASCII-protocol) and two stepper motor controllers (AML, Phytron). This are user level driv

control unipolar stepper motors connected to a parallelport.

A set of python/pygtk scripts for the Raspberry Pi to control all I/O connections. Set up as a modular menu structure to control several specific interfaces: GPIO pins, servo controller through I2C, stepper motors, USB Missile launchers..

OWLOS Open source network operating system for managing IoT devices: - does't require internet access or additional servers - ready to connect sensors, actuators, LCD, DHT, Stepper and other devices - does't require programming skills - built-in user interface - use web browser to access and manage your OWLOS nodes - built-in RESTful server - built-in MQTT client - at the same time WiFi access point and station, in any combination: - can be used autonomously - can work on a local network can work via the Internet can integrate with other nodes running under OWLOS - organizing an internal network. without using a servers available in source code