Open Source Hardware Platforms - Page 4

Velleman K8055 USB Experiment Interface Board driver. This driver provides a /proc interface which allows the inputs and outputs of the K8055 to be accessed as if they were files, making the K8055 accessible from any programming language and the shell. In addition to the /proc interface a joystick/input device is created for each K8055, Optionally a (user provided) script can be executed by the driver when it detects a change on one of the inputs or outputs.

Full functional PS/2 keyboard on Atmega16, works with simple circuits, and fully customizable. Performs really great! - ps2 / keyboard / ps2avr / controller / avr / hardware

VTD-XML is the next generation XML parser/indexer/editor/slicer/assembler/xpath-engine that goes beyond DOM, SAX and PULL in performance, memory usage, and ease of use.

libieee1284 is a cross-platform library for parallel port access.

SerialPortNet is an open source serial port communication library for Microsoft .NET. It's written in c#, implements complete .NET 2.0 specifications, and is designed to allow for multiple OSes and add-on 3rd party Serial to Network adapters.

libmylcd is a frame & font rendering library and toolkit designed to provide low level access to 2D hardware via a video framebuffer. Supported devices include SED133x, T6963C, PCD8544, S1D15G10, USBD480, PCF8833, PCF8814, USB13700, S1D15G14.

offene Implementierung von Modulen und Software für den PHC Installationsbus von Fa. PEHA (tm)

This project makes it possible to switch 8 LEDS over a USB connection. It indicates the CPU work or animations. The following page contains the schematic, firmware ... http://www.cesko.host.sk/IgorPlugUSB_RS232/IgorPlug-USB%20(AVR)%20RS232_eng.htm

This project aims to provide a fully functional GUI [and command line] interface to control the "USB LED Message Board v1.0" HW, by dreamcheeky. It allows local and remote multi-user control.

This project will implement USB device drivers for the "OSR USB FX2 Learning Kit" device by Open Systems Resources Inc on several OSes. The intent it to allow USB driver developers compare & contrasts the different OS driver development environments.

Library and command line program providing access to the EEPROM of an Silabs CP2101 / CP2102 / CP2103. It can programm the USB-Descriptors and the Baudrate table.

************************************************************************************** Steppers redirected to fastio.h from marlin firmware min switches remaped to AUX-3, GBRL uses pin change interrupts simple scheme to allow future porting of next releases command buttons currently disabled Ramps pins config moved to ramps.h cpu_map.h - min switches added GRBL_RAMPS1_4.ino for arduino IDE ************************************************************************************** Ramps 1.4 | GRBL | Test X axis | X axis | OK working Z axis | Y axis for dual motor Y axis | OK working Y axis | Z axis | OK working Ramps AUX-3 pin 3 | min X | OK working Ramps AUX-3 pin 4 | min Y | OK working Ramps AUX-3 pin 5 | min Z | not tested

Access Point Utilites for Unix - it's a set of utilites to configure and monitor Wireless Access Points under Unix using SNMP protocol. Utilites knownly compiles and run under Linux, FreeBSD, NetBSD, OpenBSD, MacOS-X, AIX, QNX.

This program was born as a parody of another *-Z utilities like CPU-Z or GPU-Z. It shows some basic information about OpenCL-enabled GPUs and CPUs.

The HDL Complexity Tool parses large complex hardware projects' source code to produce useful complexity results. GOALS: 1)Practical, effective and simple 2) Integrates with existing design flows 3) Used on real projects 4) Based on existing research

Community project to port Linux drivers to VMware's ESX and ESXi products to expand hardware support in ESX/ESXi.

UCSC SMART suite controls and monitors storage devices using the Self-Monitoring, Analysis and Reporting Technology System(S.M.A.R.T.) build into ATA and SCSI Hard Drives. This is used to check the reliability of the hard drive and predict drive failures.

A set of C language API's and firmware applications that manage access to the Digitrax LocoNet and the core hardware resources of the Atmel AVR family of devices, to allow custom embedded LocoNet devices to be developed using GCC

Custom Keyboard Layouts allowing your regular keyboard to input special charaters such as those used in various languages with having to type Alt + 4 digits under Windows.

Open source, cross platform drivers and function library for the NovInt Falcon Haptic Controller. These drivers are not produced by Novint Technologies, Inc. and do not come with any warranty as to their correctness or usage.

[Introduction] The xBridge-M01 product is a multifunctional USB bridge developed by Doidx. It can control and transmit SMBus/I2C, GPIO, Clock and other interfaces through USB. The product includes software and hardware. It has the characteristics of easy use and development. The core chip is CP2112 Graphical software and operating manual can be downloaded for free at http://xbridge-m01.doidx.com Provide the underlying Java API, http://xsmbus-m01.doidx.com , which can do simple testing and develop user-specific graphical interface products. xSmbus-xx, xBridge-xx do not need to install the driver according to the operating system in advance, nor select the COM port requirement, as long as they are in the Java environment, they can be plug and play. You can buy the product from: - China, https://shop255163877.taobao.com - Taiwan, you can buy on https://www.ruten.com.tw/user/index00.php?s=doidx

C++ Application to Control a Logitech Harmony Hub. See the Readme in the Files section for more information.

CanFestival focuses on providing an ANSI-C platform independent CANOpen stack that can be implemented as master or slave nodes on PCs, Real-time IPCs, and Microcontrollers. A WxPython based CanOpen Object Dictionary editor GUI is also provided.

This library controls many Silicon Laboratories Si47xx family radio chips with an Arduino microcontroller. Major features include: • I2C and SPI bus • Supports "original" (Uno, Duemilanove, and their clones), Mega 2560, Leonardo, and Due Arduinos • FM/AM receive modes; including short, medium, and long wave AM • Analog and/or digital audio output • FM RDS and RBDS • Localization of receive bands, channel spacing, FM de-emphasis, and RDS/RBDS • Correctly decodes RBDS PI codes into station's call letters • Can handle a mix of RDS and RBDS stations as found near the US boarders with Canada and Mexico • Example programs I2C and Due support is alpha because I do not have hardware to test these features.

DIY Arduino Boards PCF8674 MCP23017 74HC595 CD4021 I2C Parallel IO Piezo buzzers See the Files section for a wide range of sensors and sample code Schematics PCB Layout Sample Code