Search Results for "flash program for stm32"
Sort By:
Showing 13 open source projects for "flash program for stm32"
View related business solutions-
Atera all-in-one platform IT management software with AI agentsAtera’s AI agents don’t just assist, they act. From detection to resolution, they handle incidents and requests instantly, taking your IT management from automated to autonomous.
-
Total Network Visibility for Network Engineers and IT ManagersThis means every device on your network, and every interface on every device is automatically analyzed for performance, errors, QoS, and configuration.
-
1
STLINK
Open source STM32 MCU programming toolset
stlink is an open source toolset to program and debug STM32 devices and boards manufactured by STMicroelectronics. It supports several so-called STLINK programmer boards (and clones thereof) which use a microcontroller chip to translate commands from USB to JTAG/SWD. There are four generations available on the market which are all supported by this toolset. -
2
SPI FLASH Library for STM32
W25qxx, N25Qxx and other SPI FLASH driver for stm32 HAL
W25qxx, N25Qxx, and other SPI FLASH drivers for stm32 HAL. -
3
LVGL
Powerful and easy-to-use embedded GUI library with many widgets
Powerful and easy-to-use embedded GUI library with many widgets, advanced visual effects (opacity, antialiasing, animations), and low memory requirements (16K RAM, 64K Flash). LVGL provides everything you need to create an embedded GUI with easy-to-use graphical elements, beautiful visual effects, and a low memory footprint. LVGL is an open-source graphics library providing everything you need to create an embedded GUI with easy-to-use graphical elements, beautiful visual effects, and a low... -
4
NodeMCU
Lua based interactive firmware for ESP8266, ESP8285 and ESP32
NodeMCU is an open source Lua-based firmware for the ESP8266 WiFi SOC from Espressif and uses an on-module flash-based SPIFFS file system. NodeMCU is implemented in C and is layered on the Espressif NON-OS SDK. The firmware was initially developed as a companion project to the popular ESP8266-based NodeMCU development modules, but the project is now community-supported, and the firmware can now be run on any ESP module. -
Easy management of simple and complex projectsPlan more projects with Worksection. Use Gantt chart and Kanban boards to organize your projects, get your team onboard and assign tasks and due dates.
-
5
OpenBLT
Bootloader for STM32, XMC, HCS12 and other microcontroller targets.
OpenBLT is mostly used as an STM32 bootloader, due to the popularity of STM32 microcontrollers. However, the bootloader’s architecture is such that it can work with any microcontroller and use any type of communication interface to perform firmware updates. -
6
pFFh
a self-contained development environment for embedded systems.
pFFh is a programming language that allows you to launch applications on embedded systems safely, quickly and comfortably. pFFh runs on the target system, combining operation as a command interpreter and code compiler. We can say that pFFh behaves like an operating system on the board under development. All pFFh needs is a serial or USB-serial channel to communicate, and through it, receive and process console commands, either from a keyboard or from files sent from a desktop computer. At... -
7
cygWinux
Learn Linux the easy way without the Linux kernel using the Windows OS
What is cygWinux? cygWinux is a cygwin distro that does not require a time -consuming installation of cy.gwin cygWinux is a computer program like an OS distro that needs to be installed into Windows like a traditional application so that you can use it with you on a mobile device or drive and use it like a Windows program. When a USB flash drive, portable hard drive, or other mobile device is installed or your cloud drive is synced, you have access to your software and personal data just as you do on your own PC. ... -
8
Linux Deploy
Install and run GNU/Linux on Android
...The application can run better with superuser rights (root). The program supports multi language interface. You can manage the process of installing the OS, and after installation, you can start and stop services of the new system (there is support for running your scripts) through the UI. The installation process is reported as text in the main application window. -
9
FlashProg
Simple USB flash memory programmer.
FlashProg is USB base flash memory programmer which is specifically design to read and program 3.3V SPI flash memory devices. -
Figure Markets: OnChain AssetsInstantly unlock liquidity with Crypto-Backed Loans—borrow against BTC or ETH at rates starting from 12.5% APR, with no credit checks, no prepayment penalties, and 3-month terms. Keep your crypto, get your cash.
-
10
prog89s52
Utility for programming an AT89S52 via a parallel port.
prog89S52 is a utility for Linux on the PC, allowing programming of Atmel's AT89S52 microcontroller via the parallel printer port. Atmel's 89S are programmable via an SPI port and therefore require absolutely no additional components in order to program them in-system. This program requires a standard "Centronics" type PC parallel port (a bidirectional, EPP or ECP port is not required). A 5-way cable is required to connect the microcontroller to the port; wiring information is given in the included manual page. Remember that a clock source is required in order to program the device, and that EA must be tied to Vcc when programming the internal flash memory. ... -
11
PConMe©
PConMe© is a highly portable computing sandbox for educational use
PConMe© is a cool hack of a virtual machine, using Qemu and Qemu manager with Ubuntu 10.10. The project has been designed to be a computing sandbox where young computing enthusiasts can experiment, explore and program without compromising the integrity of expensive hardware. The device can be copied onto a 4GB+ flash drive and taken wherever the user wants to go. Unlike other 'live installs', with PConMe© reboot isn't necessary, just plug and play. The device architecture also enables internet access and audio, if available on the host machine. ... -
12
imagetext ( smarty image plugin )
imagetext is a smarty plugin for creating graphical cached text images
...Otherwise it will be loaded from cache." CE Original version by Christoph Cerdmann (CE). First public version was 20041125 (CE). This program uses PHP (>5.x.y) as scripting language. This PHP program uses the 'Smarty' (>2.6.x or 3.x) template engine. For the parameters have a look at the 'shared.imagetext.php' plugin file please. TrueType- and OpenType-Fonts are supported. -
13
Libswf is a library for generating Macromedia Flash .swf files from scratch. It aims to be a framework to program CGIs to create really dynamic flash pages. It contains basics datatype handling plus a few TAG encoding methods. It is the first release.
- Previous
- You're on page 1
- Next
