Search Results for "linux uart"
Sort By:
Showing 23 open source projects for "linux uart"
View related business solutions-
Build Agents and Models on One PlatformGemini Enterprise Agent Platform is Google Cloud's comprehensive platform for developers to build, scale, govern, and optimize agents and models. Choose from Google's most advanced models and third-party models like Anthropic's Claude Model Family.
-
One Monitoring Tool for IT, OT and Cloud | Free TrialModern infrastructure spans data centers, cloud platforms and factory floors, and every blind spot between them is a risk. PRTG supports SNMP, WMI, SSH and other standard protocols to monitor IT, OT and hybrid environments through one customizable dashboard. Build the views your team needs, from network health to application performance, without switching tools. Try PRTG free for 30 days now.
-
1
ch32fun
Open source minimal stack for the ch32 and ch5xx WCH RISC-V
...Its minichlink programmer supports several debug adapters and can provide GDB-style debugging and single-wire printf output. Applications can use simple GPIO, timing, ADC, interrupt, and UART helpers without adopting a full vendor SDK. The environment works on native Windows, Linux, and WSL with RISC-V GCC toolchains. Its small runtime is particularly suited to low-cost microcontrollers with very limited flash and RAM. -
2
NeoPixelBus
An Arduino NeoPixel support library
An Arduino NeoPixel support library supports a large variety of individually addressable LEDs. Please refer to the Wiki for more details. Please use the gitter channel to ask questions as the GitHub Issues feature is used for bug tracking. A library to control one wire protocol RGB and RGBW LEDs like APA106, SK6812, WS2811, WS2812, and WS2813 that are commonly referred to as NeoPixels and two-wire protocol RGB like Lpd8806, APA102, and SK9822 commonly referred to as DotStars. Supports most... -
3
pineTERM: Free In-Browser UART Terminal
Easy-to-use, powerful web/browser UART terminal, no installation req.
A modern, stand alone browser-based serial terminal for UART communication with microcontrollers, embedded devices, and IoT hardware. No installation required - just open in your browser and connect to your serial device. Just unpack the zip file into local folder and open index.html in Chrome/Edge/Opera. Works on Windows/Linux/MaOS -
4
gbdbg
Debugger for the IceBoy CPU
A small command line debugger written in C# that communicates with the debugging unit inside the IceBoy CPU via UART. -
Build Data Resilience - Take the Assessment TodayIs your recovery strategy as strong as you think? Take this quick self-assessment to check your recovery readiness and gain tailored insights. In only 2 minutes, you'll learn where you fall on the recovery readiness scale.
-
5
ChibiOS/RT is a free and efficient RTOS designed for deeply embedded applications. It offers a comprehensive set of kernel primitives and supports many architectures: ARM7, Cortex-M0, Cortex-M3, Cortex-M4, PowerPC e200z, STM8, AVR, MSP430, ColdFire, H8S, x86.
-
6
avr-gfortran
Program avr microcontroller using fortran77/90 syntax
This is a pseudo Fortran 77/90 compiler for Atmel/Microchip AVR microcontroller, written in Fortran using gfortran compiler. The compiler use avr-gcc as dependency. As of version 1.0.3-1 (8 July 2026), the compiler introduces near-comprehensive native compatibility with Fortran 77/90 syntax. For Windows version (64bit), click https://sourceforge.net/projects/avr-gfortran/files/avr-gfortran-1.0.3-alpha-2026/avr-gfortran-win-1.0.3-1.zip/download Linux version (64bit), click... -
7
NOTE: This project is marked with 'Status: Abandoned' on SourceForge because not enough time can be dedicated to this project. However it may still get sporadic commits to the repository.
-
8
eCxx
A C++ library for AVR and NodeMCU
NOTE: This project is marked with 'Status: Abandoned' on SourceForge because not enough time can be dedicated to this project. However it may still get sporadic commits to the repository. eCxx is a library for AVR and NodeMCU tailored for micro LED displays and lighting effects. eCxx is utilizing Makefile build system. Java and Python based applications/tools are also included to ease the development and debugging process using the host PC. On one side, eCxx supports the original... -
9
QistasLinks-Serial-Communication-Library
The perfect solution for projects that depend on serial communications
QistasLinks: C# library, make serial interface(RS232) communication easy and efficient for any project utilizing a serial connection. With its user-friendly methods and robust features, QistasLinks simplifies the process of establishing communication with microcontrollers and facilitates seamless data exchange, By integrating QistasLinks into your application, you can benefit from enhanced performance and extended capabilities, making it the ideal choice for any project relying on serial... -
$300 Free Credits to Build on Google CloudPut your $300 in credit toward real workloads, then keep building with free monthly usage for 20+ products. No commitment and no charge until you upgrade.
-
10
xRxTx - Uart/Com
Rxtx/Uart GUI
RxtxConsole is an API and GUI software, developed by Doidx with JSerialCom as the kernel. It can be used for multi- UART/RS232 interface operation. The platform supports Windows/MAC/Linux. Note: Developed with Java17 Follow these steps step by step to apply RxtxConsole, 1. LIST, to obtain all Serial ports currently available on the system. 2. CONNECT, Select a Serial port for connection and place it in the connection pool for use 3. ... -
11
mini-rv32ima
A tiny C header-only risc-v emulator.
...Its core implementation is only a few hundred lines and emulates the RV32IMA instruction set together with selected CSR, CLINT, and MMIO behavior. The emulator intentionally omits an MMU and other specification features that are unnecessary for its minimal Linux target. Despite its size, it can boot a no-MMU Linux environment and run user applications. A compact demonstration wrapper provides UART, kernel loading, device-tree loading, command-line interaction, and basic system control. The design is dependency-free at its core, easily embeddable, and deliberately structured so developers can extend instructions, registers, and device behavior. -
12
Periph
Peripherals I/O in Go
periph is a Go library that unifies hardware I/O on single-board computers and embedded Linux devices, exposing clean interfaces for GPIO, I²C, SPI, UART, PWM, and more. Its philosophy is “no daemon, no codegen”—you link a Go package and speak directly to the hardware via stable abstractions, keeping deployments simple and auditable. The project auto-detects host capabilities at runtime and selects the best driver backend, smoothing over kernel and board differences across Raspberry Pi, BeagleBone, and other platforms. ... -
13
simutron
AVR simulator IDE
Electronic circuit simulator. Simple environment to run and debug firmware for AVR 8-bit microprocessors. Able to run arduino firmware. Internally this program uses the open source Simavr AVR Processor Simulator (https://github.com/buserror/simavr) and wraps all its functions in a GUI shell. Setups for firmware debugging scenarios can be created dynamically. Able to run 16MHz MCU with decent set of external parts in real time. In particular this can be used for development of CNC firmware... -
14
ocapi
C-level driver collection for MSP430 and derivatives
ocapi is an open source driver collection for MSP430 and derivative processors. It provides a C language application programming interface (API) for deploying individual processor capabilities. Current modules support serial communication via UART, I2C and SPI, digital I/O (GPIO), analog-to-digital conversion (ADC), Timers and so on. ocapi aims at being independent of the development host platform. So it should work, no matter if you live in the Windows, Linux or Mac world. ocapi is used as the hardware abstraction layer for the MSP430 port of the Takatuka Java virtual machine (JVM). ... -
15
Calimero
A free Java KNX network library
Calimero is a Java library for embedded/workstation-based KNX applications. The minimum JVM requirements are either Java ME/CDC 1.4 (Foundation Profile), or Java SE 8 (profile compact1). The library provides remote access and control, supporting KNXnet/IP, KNX IP, FT1.2, TP-UART, and KNX USB. Data exchange is supported on link layer using EMI 1/2 and cEMI, KNX data point types, application/management layer, as well as message buffering. -
16
SoftIB Serial Communicator
UART communications with data flow monitoring
A simple to use serial communication software for communicating with other serial, MCU and Arduino. The SoftIB Serial Communicator communicates with other Serial devices that use a simple asynchronous communication using only the RX and TX signals without any control signals. The application was developed based on the communication with microcontrollers, but it can be used in all other cases. -
17
flAVR
A simulator for Atmel's 8/16-bit AVR microcontrollers
flAVR is a simulator for the Atmel(tm) AVR(tm) microcontrollers written in C. The project aims to implement a cycle-accurate AVR CPU core simulator along with a range of peripherals, allowing firmware written for a variety of parts to be run on a host PC. In addition, flAVR provides enhanced interactive debugging functionality - featuring breakpoints, data watchpoints, execution tracebuffers, flash/RAM/EEPROM viewers, and run-time disassembler. flAVR also implements the GDB remote... -
18
C# source code to get Optris MSPro, MSPlus IR thermometer measures, using the specific Usb/Serial cable (Silicom Lab CP210X USB to UART bridge in fact). For developper only : go to Files menu to get code. Maybe also for LS series. Say me back if it's OK.
-
19
ArduinoRCLib
Library for Arduino based R/C equipment
A library containing functions for building Arduino based R/C equipment like transmitters, receivers and flight controllers. -
20
BlackLib
Beaglebone Black C++ Library
BlackLib library is wrote for controlling Beaglebone Black's feature. It takes power from C++ language. It is created for reading analog input, generating pwm signal, using gpio pins, and communicating with other devices over uart, spi and i2c. In addition to them, it includes debugging feature. So you can check errors after call any function in the library. -
21
AVRILOS
Simple AVR OS
A simple Embedded System Framework that allows rapid development of applications build for AVR family. System is based on a super-loop architecture with check and skip (no-wait) flag event driver system. Supports: UART, SysTick Timer, ADC, SPI, EEPROM, PWM. Also supports: Xilinx FPGA configuration, FPGA SSI interface, smart card reader etc. Tested partially (different modules in each case) on ATMega163/16/32/323/8. Awards CodeProject 2010, Third Prize, Hardware and Device... -
22
This is a simple command line tool to customize CP2103 USB to UART bridge controllers in home-grown hardware. VID, PID, product name string, serial number string, and release version of the device can be changed next to GPIO port modes.
-
23
Tiny Shell provides the minimum you need to implement shell facilities into a small system. For instance, add a shell to your embedded platform as soon as you can read/write bytes from the UART.
- Previous
- You're on page 1
- Next
