Search Results for "scientific"

Engineering, testing and debugging of serial communication. Supports RS-232/422/423/485 as well as TCP/IP Client/Server/AutoSocket, UDP/IP Client/Server/PairSocket and USB Ser/HID. Optimized for simple command sets of e.g. embedded systems.

A modern, stand alone browser-based serial terminal for UART communication with microcontrollers, embedded devices, and IoT hardware. No installation required - just open in your browser and connect to your serial device. Just unpack the zip file into local folder and open index.html in Chrome/Edge/Opera. Works on Windows/Linux/MaOS

RxtxConsole is an API and GUI software, developed by Doidx with JSerialCom as the kernel. It can be used for multi- UART/RS232 interface operation. The platform supports Windows/MAC/Linux. Note: Developed with Java17 Follow these steps step by step to apply RxtxConsole, 1. LIST, to obtain all Serial ports currently available on the system. 2. CONNECT, Select a Serial port for connection and place it in the connection pool for use ...

See homepage: http://sharperdevelopment.blogspot.de/2013/01/replacing-win-xp-accessibility-features.html

This application is a ASCII-based data scope. When used with a 'spy' cable such as the CBL-Full-1A product from www.commfront.com this progrmam shows the ASCII chars on both sides of a comm link. There are three main tabs on the user interface. The 'Vertical' tab displays the comm link conversation in a vertically-scrolling half-duplex mode. Each 'side' of the conversation is detected by the user-configured 'start msg' and 'end msg' byte sequence. The 'Horizontal' tab shows...

The N8VB vCOM Virtual Serial Port Driver creates pairs of virtual serial ports on your Windows 2000 or XP system that are "virtually" connected together like a null modem cable. It behaves like a Virtual Null Modem Cable.

Shooting Chrony Data Downloader, a program that allows downloading of data acquired by the device

This project aims a proving an Hardware as a VSCP node (M2M) to store information remotely on the CAN network.

FCUtilsLibrary provides a collection of functions to communicate and control Danfoss frequency converters. One of the main targets is, to create an “easy to use” library which is independent from the operation system and the physical network.

A Perl script that interfaces with the Devantech USB to I2C interface adapter. This script allows a user to read and write as a master to the i2c bus as well as set or get the value of the io pins.

uGNU/RTOS (literally "micro G'Noo RTOS") is an Open Source serial Real Time OS for microcontrollers (PIC, ATMEL).

HW(VHDL) and SW of logic analyzer and On-Chip-Verification(OCV) for Value Change Dump(VCD) file format that exported to seemd SystemC ,ModelSIM, and many other EDA tools. Very easy and Simple.

The goal of zAutomation project is to design/implement hardware, firmware and software for remote control and monitoring of physical objects, by using the ZigBee technology and internet. The field of application is robotics and domotics.

Keep It Simple Bus is a PC+MCU based Robotics Framework that utilizes serial port to interface to multiple DC/Servo/Stepper motors through PIC12F683 ising binary protocol. Main goal is to do it as cheap as possible with minimal number of components, fast

pyLPCTools is a replacement for the Flash Programming Tools use with the Philips(tm)/NXP(tm) LPC2xxx series of ARM based microcontrollers. pyLPCTools is a script together with some ARM assembly language and a Python user interface. Please Donate !!

SCADA(Supervisory Control and Data Acquisition)system based on Scilab,include Serial,OPC,Modbus,Mysql,TCP/IP interface, and PID simulation, FUZZY control and ect...

SoftDash PC allows realtime control of the Connect2Car MFC controller unit installed in a vehicle. Softdash PC can communicate with the MFC hardware either via a serial connection or a Bluetooth Connection. This project allows for open ended expansion.

Simple Serial COM read/write program. I needed it for Caller ID read modem driver so it has command auto complete for AT commands. It is a good replacement for HyperTerminal. Made for .NET Framework 2.0

A portable library to access braille displays.

SerialPortNet is an open source serial port communication library for Microsoft .NET. It's written in c#, implements complete .NET 2.0 specifications, and is designed to allow for multiple OSes and add-on 3rd party Serial to Network adapters.

Written in C++, IFI-picloader is a US First Competition Linux port for Innovation First Inc. Robot Controller programmer using a pic 18F8520. It writes MCC18 compiled hex files to PIC and allows users to program under *nix based operating systems.

There are different files supplied. One program for webcam controlling inline with the orginal idé. And different help classes if you would like to do something yourself. Also a general package of classes to communicate with the RS232 port.