Search Results for "which"

... - In addition to the main interface scripts can create and use their own interfaces (serial port (RS232, USB to serial), UDP, TCP client, TCP server, PCAN, and SPI/I2C). - Scripts can use their own GUI (GUI files which have been created with QtDesigner (is included) or QtCreator). - Multiple plot windows can be created by scripts (QCustomPlot developed by Emanuel Eichhammer is used)

JYMAG (Jig Your Music And Graphics) is a program for communicating with serial-port-based mobile phones. It is a free replacement for the Sagem mobile phone software, 'My Pictures and Sounds', and a general-purpose serial terminal. See the project homepage https://jymag.sourceforge.io and the project Wiki in the menu above.

ScriptCommunicator (scriptable data terminal) script which routes: - serial port (RS232, USB to serial) <-> TCP/IP (Client/Server) - serial port (RS232, USB to serial) <-> UDP/IP - TCP/IP (Client/Server) <-> UDP/IP ScriptCommunicator can be found here: https://sourceforge.net/projects/scriptcommunicator/

...Sometimes, the Serial ports that you try to connect may have been used by other applications. 4. USE, select a connected serial port for which the command is transmitted only. 5. Start p2p communication with each other, ex: SCPI... 6. If you want to make other Settings on the system, you can USE SYS to change

There's been a lot of churn around AMS since it began back in Rails 3.2 and a lot of new libraries are around and the JSON:API spec has reached 1.0. If there is to be a 1.0 release of AMS, it will need to address the general needs of serialization in much the way ActiveJob can be used with different workers. The next major release is in development. We're starting simple and avoiding, at least at the outset, all the complications in AMS version, especially all the implicit behavior from...

This is the software which can Serial communicate such as RS232C or UART. It's especially for Emblembed system Debuging or Developing. It can communicate with String, Binary, Octal, Decimal and Hexadecimal.

cyclades-serial-client is an RFC 2217 compliant client that works with servers such as Cyclades Terminal Servers and sercd. It creates a virtual serial port which connects to the server over a network.

FCUtilsLibrary provides a collection of functions to communicate and control Danfoss frequency converters. One of the main targets is, to create an “easy to use” library which is independent from the operation system and the physical network.

This program builds up a Modem server, which supports Hiroyoshi Kurohara's NPCOMM-Suite.

gives remote control of a PC running MS-DOS (which e.g. does not have a monitor display attached to it). The screen image (currently text mode only) is taken from the graphics card and transferred to other computer via serial link and displayed there

A dialect-neutral Smalltalk library which supports communication with NMEA enabled devices, such as GPS receivers. The initial specific target device will be a Magellan GPS315 receiver.

This project is a specialized terminal program, designed to comunicate with the PU552 micro-contoller development board, which is built around the Philips 80552 micro-contoller. At this point it is a text based program, written in C.