Search Results for "2-plan"

RS232 Terminal Program

...Note: Developed with Java17 Follow these steps step by step to apply RxtxConsole, 1. LIST, to obtain all Serial ports currently available on the system. 2. CONNECT, Select a Serial port for connection and place it in the connection pool for use 3. CONNECTED, check that the Serial ports are connected. Sometimes, the Serial ports that you try to connect may have been used by other applications. 4. USE, select a connected serial port for which the command is transmitted only. 5. ...

Java implementation of the Omni-Link Serial Protocol and Network Protocol as well as the Omni-Link II Network Protocol as described in two separate specification documents released by Home Automation Inc (HAI).

Xpacket - the porpular Packet-Radio Terminal Plan is a Port to Linux. Actually there are the Sources from 1.81b8 . We need all Help!

...ORDER use and limitations: 1. You can optionally set the COM port in the procedure 'reinit()' with constantly raised the flag of activation in the library is being processed. 2. Parameter gl_count procedure 'getdata' indicates the number of received packets of COM-port. 3. Implemented AutoTrack pulling converter RS-485/USB (via SetupAPI) and reconnect to the specified port initialization.

This Linux script helps people learn how to program routers. It has a GUI and a terminal that can be used simultaneously. GUI command output appears on the terminal, along with the results. The terminal is always available and interactive.

Firmware for a VT-2xx Terminal Clone

Serlook is a tool aimed to inspect and debug serial line data traffic developed in a Linux+KDE environment.

my projects during my internship in oceanography centre, project 1: connection usb with OBS. project 2: treat the signal from serial port

HW(VHDL) and SW of logic analyzer and On-Chip-Verification(OCV) for Value Change Dump(VCD) file format that exported to seemd SystemC ,ModelSIM, and many other EDA tools. Very easy and Simple.

Development of code to control the LCD display, keypad , communications and other aspects of the CFA-633 hardware from Crystalfontz. ( Based on PSoC processors from Cypress )

USPUI-Universal Serial Port User Interface WxWidgets based grfic user interface for serial port. You can define the interface by simple configuration file.

MuCTools is a group of command line utilities connect with Philips'P89C668 (8051 type) and other Philips microcontroller bootloaders, completing the 8051 development chain with free software for linux. muctools0.9 works with limited features. See README

GbDas is a real-time data acquisition software written in Gambas. It uses Advantech 4000 series modules via RS-232 to acquire data from a variety of meteorological sensors

libserial This library provides a C++ multithreading encapsulation for serial port ioctls. Also, it provides buffering mechanisms in order to support active rs232 devices

The project works on a kernel module and inetd service to allow the usage of a distant RS.232 port through a network connection.

HCTerm is a graphical terminal/loader for the Motorola M68HC11 evaluation board (EVBU), and modern clones.

ttypatch is a Linux application that permits two or more "serial port user programs" to reliably connect to each other without the use of actual serial ports. Also acts as a virtual patch panel among any number of real and virtual serial ports.

Ssnooper is a program to created to aid in the debugging of serial line (RS232) connections. With ssnooper, a computer with two free serial ports can be connected between two serial devices to intercept and log all communications.

Provides access to a GPS device, fully written in perl