Search Results for "open-vm-tools"

Engineering, testing and debugging of serial communication. Supports RS-232/422/423/485 as well as TCP/IP Client/Server/AutoSocket, UDP/IP Client/Server/PairSocket and USB Ser/HID. Optimized for simple command sets of e.g. embedded systems.

SerialToIP is a simple Terminal Server software providing transparent pipe either in TCP server or TCP client socket mode from TCP/IP to a pre-configured serial port. Implemented in C# for .NET 2.0 so the command line version could work in Mono-runtime as well.

Uart32 is a C++ wrapper around the win32 Serial Port API that allows blocking-mode access to the COM port. This library works great for accessing a UART serial port from a background worker thread. It features: a simple c++ class. (temporarily removed for maintainance. Use DLL API Instead) built in per access timeout on data receive. a C-API wrapper that is exportable to C# DLL import class

This service listens for incoming TELNET network connections. When a connection on the network port is received, the corresponding serial port is opened and the data between the two ports is redirected. When the network connection is closed, the serial port is closed and the service begins listening for another network connection.

This application is a ASCII-based data scope. When used with a 'spy' cable such as the CBL-Full-1A product from www.commfront.com this progrmam shows the ASCII chars on both sides of a comm link. There are three main tabs on the user interface. The 'Vertical' tab displays the comm link conversation in a vertically-scrolling half-duplex mode. Each 'side' of the conversation is detected by the user-configured 'start msg' and 'end msg' byte sequence. The 'Horizontal' tab shows...

BikiSoft contains the windows software and atmel firmware for the BikiRom Mega-board product line. The bikirom boards are used to re-tune 1990-2002 Nissan SR20 based ECUs and ER34 ECUs. The hardware is available seperately.

UAVPSet is a program to adjust and configure your parameters for your OpenSourceQuadroCopter.

This is a serial-to-ethernet and/or ethernet-to-serial gateway project. Such a software could reveal useful in many cases.

A server application, a TELNET server, which mainly works as an interface for users to connect to the server serial port or another TELNET server. Any new ideas may be added in along the implementation.

.Net library for the Crystalfontz displays CFA631, CFA633 and CFA635. Also, provides classes to scroll text, display a progressbar, and link a com port to a more logical name with the WMI.

Termie is a simple RS232 terminal.

GUMA is a GPRS-Gateway written in C#. It contains a terminal for serial communication, phonecall-screen, SMS-Screen to send SMS from GPRS USB-Modem to GPRS phone. Param: Port, Baud, Parity, Data-/Stopbits, Write-/Readtimeout, Pin.

Simple Serial COM read/write program. I needed it for Caller ID read modem driver so it has command auto complete for AT commands. It is a good replacement for HyperTerminal. Made for .NET Framework 2.0

SerialPortNet is an open source serial port communication library for Microsoft .NET. It's written in c#, implements complete .NET 2.0 specifications, and is designed to allow for multiple OSes and add-on 3rd party Serial to Network adapters.

This application will be the software part for "Universal Atmel Flash 8051 / AVR Programmer" that can be found at : http://home.tiscali.de/peterd/tools/proflash/index.htm (on my opinion this is the best free MCS51/AVR programmer).

Terminal like program with integrated LUA interpreter and specifically designed to use with Wavecom wireless modules.

The milowidget is a coffee roaster profile/control project, using a Arduino contol board and implementing PID.