Search Results for "mono"

Engineering, testing and debugging of serial communication. Supports RS-232/422/423/485 as well as TCP/IP Client/Server/AutoSocket, UDP/IP Client/Server/PairSocket and USB Ser/HID. Optimized for simple command sets of e.g. embedded systems.

Current stable release: version 1.3 (2022-11-10) More info in wiki.

SerialToIP is a simple Terminal Server software providing transparent pipe either in TCP server or TCP client socket mode from TCP/IP to a pre-configured serial port. Implemented in C# for .NET 2.0 so the command line version could work in Mono-runtime as well.

This is a tiny windows application that shows current available COM ports in system. It also can be configured to run a command whenever user clicks on the port name. It could be very useful with combination of PUTTY for example.

This is studying project in CUFE intended to develop a temperature and security system based on a microcontroller with a serial communication with PC The Embedded software is developed on AVR Atmega16 microcontroller while the PC user interface is programmed with C# .Net 4.5 Project Description: https://goo.gl/KK9Aqc

This application is a ASCII-based data scope. When used with a 'spy' cable such as the CBL-Full-1A product from www.commfront.com this progrmam shows the ASCII chars on both sides of a comm link. There are three main tabs on the user interface. The 'Vertical' tab displays the comm link conversation in a vertically-scrolling half-duplex mode. Each 'side' of the conversation is detected by the user-configured 'start msg' and 'end msg' byte sequence. The 'Horizontal' tab shows...

BikiSoft contains the windows software and atmel firmware for the BikiRom Mega-board product line. The bikirom boards are used to re-tune 1990-2002 Nissan SR20 based ECUs and ER34 ECUs. The hardware is available seperately.

UAVPSet is a program to adjust and configure your parameters for your OpenSourceQuadroCopter.

This is a serial-to-ethernet and/or ethernet-to-serial gateway project. Such a software could reveal useful in many cases.

A server application, a TELNET server, which mainly works as an interface for users to connect to the server serial port or another TELNET server. Any new ideas may be added in along the implementation.

System tray caller id applet for Windows based on .NET framework. Turns on caller ID function of the modem, and when any output occurs (a call comes in), a small log window appears showing all text, verbatim.

Termie is a simple RS232 terminal.

GUMA is a GPRS-Gateway written in C#. It contains a terminal for serial communication, phonecall-screen, SMS-Screen to send SMS from GPRS USB-Modem to GPRS phone. Param: Port, Baud, Parity, Data-/Stopbits, Write-/Readtimeout, Pin.

Terminal like program with integrated LUA interpreter and specifically designed to use with Wavecom wireless modules.