Search Results for "graphical user interface"

Engineering, testing and debugging of serial communication. Supports RS-232/422/423/485 as well as TCP/IP Client/Server/AutoSocket, UDP/IP Client/Server/PairSocket and USB Ser/HID. Optimized for simple command sets of e.g. embedded systems.

SerialToIP is a simple Terminal Server software providing transparent pipe either in TCP server or TCP client socket mode from TCP/IP to a pre-configured serial port. Implemented in C# for .NET 2.0 so the command line version could work in Mono-runtime as well.

This is a tiny windows application that shows current available COM ports in system. It also can be configured to run a command whenever user clicks on the port name. It could be very useful with combination of PUTTY for example.

This is studying project in CUFE intended to develop a temperature and security system based on a microcontroller with a serial communication with PC The Embedded software is developed on AVR Atmega16 microcontroller while the PC user interface is programmed with C# .Net 4.5 Project Description: https://goo.gl/KK9Aqc

Cereal Communicator is a free software designed for implementing serial communication through RS-232 interface. With this sofware, you can send and receive binary, hexadecimal and ASCII data. Requirements: .NET Framework 2.0. Works only on Windows.

This application is a ASCII-based data scope. When used with a 'spy' cable such as the CBL-Full-1A product from www.commfront.com this progrmam shows the ASCII chars on both sides of a comm link. There are three main tabs on the user interface. The 'Vertical' tab displays the comm link conversation in a vertically-scrolling half-duplex mode. Each 'side' of the conversation is detected by the user-configured 'start msg' and 'end msg' byte sequence. The 'Horizontal' tab shows bytes, one...

BikiSoft contains the windows software and atmel firmware for the BikiRom Mega-board product line. The bikirom boards are used to re-tune 1990-2002 Nissan SR20 based ECUs and ER34 ECUs. The hardware is available seperately.

UAVPSet is a program to adjust and configure your parameters for your OpenSourceQuadroCopter.

A server application, a TELNET server, which mainly works as an interface for users to connect to the server serial port or another TELNET server. Any new ideas may be added in along the implementation.

System tray caller id applet for Windows based on .NET framework. Turns on caller ID function of the modem, and when any output occurs (a call comes in), a small log window appears showing all text, verbatim.

Termie is a simple RS232 terminal.

GUMA is a GPRS-Gateway written in C#. It contains a terminal for serial communication, phonecall-screen, SMS-Screen to send SMS from GPRS USB-Modem to GPRS phone. Param: Port, Baud, Parity, Data-/Stopbits, Write-/Readtimeout, Pin.

Simple Serial COM read/write program. I needed it for Caller ID read modem driver so it has command auto complete for AT commands. It is a good replacement for HyperTerminal. Made for .NET Framework 2.0

SerialPortNet is an open source serial port communication library for Microsoft .NET. It's written in c#, implements complete .NET 2.0 specifications, and is designed to allow for multiple OSes and add-on 3rd party Serial to Network adapters.

This application will be the software part for "Universal Atmel Flash 8051 / AVR Programmer" that can be found at : http://home.tiscali.de/peterd/tools/proflash/index.htm (on my opinion this is the best free MCS51/AVR programmer).