Search Results for "connection"

Engineering, testing and debugging of serial communication. Supports RS-232/422/423/485 as well as TCP/IP Client/Server/AutoSocket, UDP/IP Client/Server/PairSocket and USB Ser/HID. Optimized for simple command sets of e.g. embedded systems.

CaTer is a terminal programm for the C64. It is intended to connect the C64 via a serial RS-232 connection to a Linux or Unix host. It is possible to make either a CaTer auto start cartridge, or to load it with a BASIC loader.

Mainly designed for embedded & software engineers, UartVide is a flat-UI and straightforward and lightweight RS232 serial port communication utility that allows you to configure the connection parameters and communicate via the port. UartVide runs on all platforms supported by PySide2 including Windows, Linux. (MyTerm was renamed to UartVide from version 2.4)

...Note: Developed with Java17 Follow these steps step by step to apply RxtxConsole, 1. LIST, to obtain all Serial ports currently available on the system. 2. CONNECT, Select a Serial port for connection and place it in the connection pool for use 3. CONNECTED, check that the Serial ports are connected. Sometimes, the Serial ports that you try to connect may have been used by other applications. 4. USE, select a connected serial port for which the command is transmitted only. 5. ...

A very simple software that bidirectionally forwards COM (serial) communication through a TCP/IP connection. Typical application: you want to use 2 devices (that are connected to each other using RS232 protocol), remotely. With this software you'll be able to operate them in different locations. Act as TCP server / TCP Client. Supports multiple clients. LICENSE: Apache License Version 2.0, January 2004 http://www.apache.org/licenses/

This service listens for incoming TELNET network connections. When a connection on the network port is received, the corresponding serial port is opened and the data between the two ports is redirected. When the network connection is closed, the serial port is closed and the service begins listening for another network connection.

FUNterm is a serial port terminal program for Windows. It offers basic serial connection. Because FUNterm is written using basic Win32 calls, with no high-level libraries, it works under Linux using Wine. The serial driver can be used separately.

Allows you to redirect all communication data from RS232 compliant serial port device into a text file for further analysis. RS232 Data Logger redirects data from any available serial port/ports and works under Virtual Machine.

my projects during my internship in oceanography centre, project 1: connection usb with OBS. project 2: treat the signal from serial port

Serial Port to TCP/IP Connection Mapper. Maps sockets to serial ports.

SoftDash PC allows realtime control of the Connect2Car MFC controller unit installed in a vehicle. Softdash PC can communicate with the MFC hardware either via a serial connection or a Bluetooth Connection. This project allows for open ended expansion.

The project works on a kernel module and inetd service to allow the usage of a distant RS.232 port through a network connection.

ttypatch is a Linux application that permits two or more "serial port user programs" to reliably connect to each other without the use of actual serial ports. Also acts as a virtual patch panel among any number of real and virtual serial ports.

This plugin aims to provide an intuitive way of filtering and sorting logs that are coming from ssh or serial connection. Operating systems: Windows/Linux