Search Results for "mount"
Sort By:
Showing 15 open source projects for "mount"
View related business solutions-
$300 Free Credits for Your Google Cloud ProjectsLaunch your next project with $300 in free Google Cloud credits—no strings attached. Test, build, and deploy without risk. Use your credits across the entire Google Cloud platform to find what works best for your needs. After your credits are used, continue with always-free tier services. Only pay when you're ready to scale. Sign up in minutes and start exploring.
-
AI-powered service management for IT and enterprise teamsGive your IT, operations, and business teams the ability to deliver exceptional services—without the complexity. Maximize operational efficiency with refreshingly simple, AI-powered Freshservice.
-
1
CCDciel
Astronomy CCD capture software
...It include all the features required to perform digital imaging CCD observation of celestial objects. Using the standard drivers protocol INDI and ASCOM it can connect and control the CCD camera, the focuser, the filter wheel and the telescope mount. This software is part of a full suite for astronomical observation: https://sourceforge.net/projects/skychart/ https://sourceforge.net/projects/indistarter/ https://sourceforge.net/projects/eqmodgui/ Requirement: https://sourceforge.net/projects/libpasastro/ See also: https://sourceforge.net/projects/indi/ -
2
PreviSat
Satellite tracking software
PreviSat is a satellite tracking software for observing purposes. Very easy to use, it shows positions of artificial satellites in real-time or manual mode. PreviSat is able to make predictions of their passes, predictions of MetOp and COSMO-SkyMed flares, transits of all satellites, predictions of Starlink satellites passes and several other calculations. -
3
Project: Icarus
A model rocketry project studying temperatures inside the body tube
...The sensors record the heat buildup inside the body tube as the solid rocket motor burns and fires the ejection charge. The sensors are placed in three different locations along the body tube to provide data on the temperature between the motor mount and the body tube, the temperature above the motor mount but below the flameproof recovery wadding, and finally the area where the parachute is housed, just above the wadding. This project is used in conjunction with the Arduino Primary Avionics Module (A-PAM) which can be found at https://sourceforge.net/projects/arduino-base-avionics-bay. ... -
4
SIxO
Multipurpose Vehicle Computer
SIxO is a software project for odometer, tripcounter and multimeter, suppporting many more features for any kind of vehicle. The essential microcontroller hardware (Renesas M16C, graphical display 128x64, casing, keyblock) can be ordered at www.sixo.de. -
Our Free Plans just got better! | Auth0You asked, we delivered! Auth0 is excited to expand our Free and Paid plans to include more options so you can focus on building, deploying, and scaling applications without having to worry about your security. Auth0 now, thank yourself later.
-
5
libnexstar
C API to control NexStar compatible telescopes
This library implements the serial commands supported by the Celestron NexStar hand control (HC) and SkyWatcher/Orion SynScan HC. This applies to the Celestron: NexStar GPS, NexStar GPS-SA, NexStar iSeries, NexStar SE Series, NexStar GT, CPC, SLT, Advanced-VX, Advanced-GT, CGE, CGEM etc. SkyWatcher: EQ5, HEQ5, EQ6 (Pro), AZ-EQ5 GT, AZ-EQ6 GT, EQ8 etc. and the corresponding Orion mounts. Communication to the hand control is 9600 bits/sec, no parity and one stop bit via the RS-232... -
6
PARot polar aligner
Software for polar alignment of equatorial mounts
PARot is a program for ultra fast and precise polar alignment of equatorial mounts. You can easily achieve alignment accuracy better than 1 arcmin in 5 minutes of time. You take one image of the celestial pole, rotate the mount around the RA axis and take another image. The program compares the images and shows you the necessary adjustment. The adjustment process is controlled by the live-liew created by your camera. Requirements: * A computer with Windows OS (tested with WinXP x64, Win7 x64, Win7 x86). * Maxim DL version 5. * A camera which can be controlled from MaxIm... -
7
NexStarCtl
Cross platform Perl API to control NexStar compatible telescopes
This module implements the serial commands supported by the Celestron NexStar hand control (HC) and SkyWatcher/Orion SynScan HC. This applies to the Celestron: NexStar GPS, NexStar GPS-SA, NexStar iSeries, NexStar SE Series, NexStar GT, CPC, SLT, Advanced-VX, Advanced-GT, CGE, CGEM etc. SkyWatcher: EQ5, HEQ5, EQ6 (Pro), AZ-EQ5 GT, AZ-EQ6 GT, EQ8 etc. and the corresponding Orion mounts. Communication to the hand control is 9600 bits/sec, no parity and one stop bit via the RS-232 port... -
8
Savuka-VirtualBox
Virtual Box VDI of SliTaz Linux with Savuka installed and configured
...root name: root root password: root username: tux password: root Instructions: -Download and install 7zip (www.7-zip.org) -Extract files to HDD -Install included VirtualBox (not tested on other versions, but shouldn't matter) -Within VirtualBox make a new machine ----Machine/New --------Name: Savuka / Type: Linux / Version: Other Linux (32-bit) --------1024MB RAM -------- Use Existing virtual drive (point to extracted Savuka.vdi) ---- Machine/Settigns/Display: set video memory to 50 MB, enable 2D and 3D acceleration ---- Machine/Settings/Shared Folders: Create new machine folder. Point to any data directory, folder name: DATA, select Auto-mount. Note: "Folder name" must be 'DATA' in all caps to link on boot Thats it! More Info: www.osmanbilsel.net www.paulnobrega.net -
9
Resistor Value Identifier
Identify electronic resistor values
This HTML utility allows the user to select standard color codes or surface mount numbers, then it identifies the resistor value. There is no need to memorize color codes or multipliers. An online working example of this program can be used at ZoomAviation.com/programs. -
Ship Agents FasterGemini Enterprise Agent Platform lets you rapidly build, scale, govern and optimize production-ready agents grounded in your organization's data. The platform enables developers to build custom or pre-built agents for virtually any use case. New customers get $300 in free credits.
-
10
Instrumented Telescope
Software for instrumenting a Dobsonian telescope
This projects hold software required for instrumenting an alt-az telescope mount. The required hardware is documented here (http://simonbox.info/index.php/astronomy). The software enables real time conversion from (measured) alt-az to ra-dec and manages a connection to Stellarium (http://www.stellarium.org/), which allows you to view where the telescope is pointing in a virtual planetarium. -
11
iAstroHub
Automated astrophotography using mobile devices
...CCD: QHY5,6,8,8L,9,11,12 4. Filter wheel: Starlight Xpress 5. Focuser: Robofocus 6. Flat fielder: Flip-Flat 5. USB serial adapter (PL2303-based) for controlling a mount via a serial port. I recommend ATEN UC232A. 6. Powered USB hub 7. TRONSMART MK808 (with RK901 wifi) or MK808B (with RK903 wifi). I got it from geekbuying.com. Or any RK3066 mini PC stick + an external Ralink5370 usb wifi adapter. 8. Class-10 micro SD card (at least 8GB). If you have any question, discuss here ... -
12
Open PECTool
Open PECTool - manipulate peroidic error data for Celestron mounts.
This is clone of the Celestron PECTool used to upload, download and manipulate PEC data. It is intended to work with Celestron Nexstar mounts like NexStar GPS, NexStar GPS-SA, NexStar iSeries, NexStar SE Series, NexStar GT, Advanced-VX, Advanced-GT and CGE mounts. Communication to the hand control is 9600 bits/sec, no parity and one stop bit via the RS-232 port on the base of the hand control. To build it libnexstar version 0.11 or newer is needed, which can be found here:... -
13
astroDevice
Software platform for the control of astronomical instruments.
astroDevice is a software platform for the control of astronomical instruments (telescope mount, filter wheel, focuser and CCD) through a single interface. This platform manages any astronomical device through plug-ins. It can manage multiple devices of same type (eg two telescope mounts). astroDevice is an alternative to ASCOM and INDI by providing a common interface between each device type and astronomy software such as Starry Night, KStars, Skychart and Stellarium. -
14
Computerized Telescope
Arduino lx200 based computerized telescope
Arduino al/az mount controller based on lx200 protocol. -
15
The goal of project "defE" is to build a library to handle the simulation of the transformation and collision about deformable geometry using the sphere-spring system. It uses CUDA to deal with the enormous mount of parallel computable calculation.
- Previous
- You're on page 1
- Next
