Search Results for "receiver"
Sort By:
Showing 38 open source projects for "receiver"
View related business solutions-
Try Google Cloud Risk-Free With $300 in CreditUse your credit across every product. Compute, storage, AI, analytics. When it runs out, 20+ products stay free. You only pay when you choose to.
-
Add Two Lines of Code. Get Full APM.Works out of the box for Rails, Django, Express, Phoenix, and more. Monitoring exceptions and performance in no time.
-
1
GNSS-SDR
An open source software-defined GNSS receiver
An open source software-defined Global Navigation Satellite Systems (GNSS) receiver written in C++ and based on the GNU Radio framework. -
2
rx2fits
HF/VHF spectrosopy code for the rx888mk2 direct-sampling receiver
rx2fits is an SDR code for the rx888mk2 direct-sampling receiver that streams spectral data with frequency up to 65 MHz to FITS files. This code is for the direct-sampling input of the receiver, which transmits real samples over USB3 at up to 130 MHz sample rate. rx2fits processes these samples to spectral intensities via a Fourier-transform poly-phase filter bank, which provides spectral resolution approaching the spectral bin width with good stop-band and adjacent-channel rejection. ... -
3
sidmon5
VLF receiver for monitoring VLF transmitter signsls for evidence of tr
This linux package is a VLF receiver for monitoring VLF transmitter signals for evidence of transients indicating ionospheric disturbances. It takes sample pairs from dual-channel sound cards and spectrally processes them to Stokes parameters. -
4
radiOS
Linux for Amateur Radio
...-As of 01JUNE2024 all packages have been updated, some have been removed due to difficulty in maintaining non-standard package dependencies, some useful links were added to Firefox, as well as a sample GRC for an SDR FM receiver. -
Full-stack observability with actually useful AI | Grafana CloudBuilt on open standards like Prometheus and OpenTelemetry, Grafana Cloud includes Kubernetes Monitoring, Application Observability, Incident Response, plus the AI-powered Grafana Assistant. Get started with our generous free tier today.
-
5
sidmon5.net
Sudden ionospheric disturbance monitor with Stokes data product
This package is a VLF receiver for monitoring VLF transmitter signals for evidence of transients indicating ionospheric disturbances, usually caused by x-ray bursts from the sun. It takes sample pairs from dual-channel sound cards and spectrally processes them to Stokes parameters. Data are plotted as time series and in scatter plots. -
6
proex gpr control
Mala ProEx and Easy Locator GPR control software
...The communication protocol was ported to a graphical user interface applicable to embedded systems through the use of the Qt toolkit (tested on Armadeus Systems APF27 board). The GUI includes GPS datalogging capability assuming a receiver providing NMEA sentences at 4800 bauds is connected to the host computer. Because the software requires access to the raw socket communication, it must be run with administration (root) privileges. A dedicated mode for sensor reading through the wireless GPR link is implemented through 2 separate time-windows, one for subsurface structure analysis and the other for sensor signal recording. ... -
7
A set of cross-platform tools for connecting via TCP/IP to the VOEvent transient astronomy alert network. Tools include a receiver/broker, a sender/publishing tool, and a VOEvent message checker. Runs on Linux, Mac OS X and Microsoft Windows.
-
8
wxProdOp
NMR Product Operator Calculator
The program does nmr product operator calculations for one, two, three and four spins. Receiver phase cycling is possible in conjunction with pulse phase cycling to simulate coherence pathway selection. An extensive manual and help files are included. Currently running under Linux and Windows. -
9
eGPXviewer
eGPXviewer is a 3D GPX track viewer
eGPXviewer is a GPS track viewer capable of summarizing key data of input track GPS series, displaying the track's altitude & speed profile and provide interactive 3D perspective views of it. The GPS track data should be input from a GPX exchange formatted file which is typically obtained by downloading a GPX file from a GPS receiver/tracker (e.g. Garmin™) or an iOS™/Android™ tracker app. The GPX exchange format is a standard output file format available in most GPS tracker devices/applications. It is human readable text file written in XML. Read more about the GPX exchange file format here https://en.wikipedia.org/wiki/GPS_Exchange_Format. eGPXviewer is currently available for Win10 and Linux (Ubuntu/Mint, CentOS, OpenSUSE, Raspbian) operating systems... -
MongoDB Atlas runs apps anywhereMongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
-
10
RxCalc
RxCalc is a calculator for the analysis of multi-stage receiver.
RxCalc is a calculator for the analysis of multi-stage receiver. The software can calculate cascaded and system parameters: gain, noise, sensitivity, input and output P1dB and IP3, noise floor, spur-free dynamic range, MDS, SNR, and others. Sources code: https://github.com/arhiv6/rxcalc Binary package: http://sourceforge.net/projects/rxcalc/ -
11
SocExplorer
SocExplorer, an open source System On Chip testing software/framework.
SocExplorer is an open source generic System On Chip testing software/framework. We write this software for the development and the validation of our instrument, the Low Frequency Receiver(LFR) for the Solar Orbiter mission. This instrument is based on an actel FPGA hosting a LEON3FT processor and some peripherals. To make it more collaborative, we use a plugin based system, the main executable is SocExplorer then all the functionality are provided by plugins. Like this everybody can provide his set of plugins to handle a new SOC or just a new peripheral. ... -
12
Firmware, Receiver software and Hardware design for the Bowsense motion sensor interface. The received data stream can be converted to OSC packets, and distributed to OSC enabled realtime music applications.
-
13
JPacketGenerator
UDP Packet Generator (Stream generator)
Very basic UDP traffic generator. Works with a packet receiver to control the network status as Bandwidth, RTT, jitter, Loss % etc etc... Set Source Address, Destination address - Port Packet Size Stream Bandwidth And press start Command Line interface available java -jar JPacketGenerator.jar srcAddress srcPort dstAddress dstPort bitRate_bps All parameters are mandatory and with parameters the generator require no GUI or windows manager to work. -
14
tool collection for communication with GPS devices via GARMIN protocol. A graphical frontend for visualization of all gps-data and remote control of the GPS receiver is included. GPS-Earth also uses undocumented features that might or might not work wit
-
15
OpenGPSX Lazarus Component for GPS Interface programming. Decode NMEA messages, Display GPS skyplot view, Display GPS signal strength, Display target navigation.
-
16
Substitutes the missing GPS information in Garmin TCX files when devices lacking a GPS receiver are used to collect training data (Garmin FR 60, heartrate and pedometer only). GpxTcxWelder integrates GPS info from a GPX v1.1 files into TCX files
-
17
GNU AIS is software for demodulating and decoding Automatic Identification System messages used by ships to navigate. You will need a VHF receiver with discriminator output to get it to work.
-
18
A collection of classes and functions that can be used to simulate 802.11 (a or p) physical layer operations. Makes use of the IT++ library and contains several receiver implementations as well as channel models and simulation examples.
-
19
POLGUI - Matlab Polhemus Interface
A MATLAB GUI interface for the Polhemus Fastrak system to digitize EEG
POLGUI is an interface between MATLAB and the Polhemus Fastrak digitizer used to digitize fiducial locations and scalp EEG electrode locations. There are 5 versions all of which work under MATLAB R14 (on both linux and windows platforms) (1) polgui_ver1_r14 : works with 1 receiver (stylus pen) (2) polgui_ver2_r14 : works with 2 receivers (including the pen) (3) polgui_ver3_r14 : works with 3 receivers(including the pen) (4) polgui_ver4_r14 : works with 4 receivers (including the pen) (5) polgui_ver5_r14 : Generic version which works with 1/2/3/4 receivers [WARNING: Ver 5 might be buggy; not fully tested] -
20
Pamvotis is a Wireless LAN Simulator for all the current physical layer extentions of the IEEE 802.11 (IEEE 802.11 a/b/g) standard and for the IEEE 802.11e Draft for Quality of Service in WLANs.
-
21
OpenSource GPS is software for x86 PCs that allows you to acquire, track and demodulate signals from GPS satellites. OSGPS requires a Zarlink GP2021 12 channel GPS correlator chip or software receiver hardware such as the GPS1A, see www.gpscreations.
-
22
Sharc is used to download data from locally and remotely connected GPS receivers. It currently supports Several different receiver types
-
23
This little tool lets you turn on and off the GPS functionality of a DELL 5530 mobile broadband mini pci-e card, which is also known as Sony Ericsson MBM F3705g. Furthermore it shows the NMEA output of the GPS receiver.
-
24
MerakoGPS is a set of software for Merako-series board aiming at GPS receiver development. MerakoGPS runs on a flexible Merako-series hardware board which uses a CycloneIII FPGA to accomplish the correlator function. see http://www.hyrising.com.
-
25
Mellow Panda is a collection of LINUX applications for control of radio receivers. It consists of a daemon and specialized clients (dedicated to each receiver model). There are example clients which Uniden Bearcat and Icom radios.
