Search Results for "mount"
Sort By:
Showing 23 open source projects for "mount"
View related business solutions-
Our Free Plans just got better! | Auth0 by OktaYou asked, we delivered! Auth0 is excited to expand our Free and Paid plans to include more options so you can focus on building, deploying, and scaling applications without having to worry about your secuirty. Auth0 now, thank yourself later.
-
Bright Data - All in One Platform for Proxies and Web ScrapingBright Data offers the highest quality proxies with automated session management, IP rotation, and advanced web unlocking technology. Enjoy reliable, fast performance with easy integration, a user-friendly dashboard, and enterprise-grade scaling. Powered by ethically-sourced residential IPs for seamless web scraping.
-
1
PreviSat
Satellite tracking software
PreviSat is a satellite tracking software for observing purposes. Very easy to use, it shows positions of artificial satellites in real-time or manual mode. PreviSat is able to make predictions of their passes, predictions of MetOp and COSMO-SkyMed flares, transits of all satellites, predictions of Starlink satellites passes and several other calculations. -
2
CCDciel
Astronomy CCD capture software
A CCD capture software intended for the amateur astronomer. It include all the features required to perform digital imaging CCD observation of celestial objects. Using the standard drivers protocol INDI and ASCOM it can connect and control the CCD camera, the focuser, the filter wheel and the telescope mount. This software is part of a full suite for astronomical observation: https://sourceforge.net/projects/skychart/ https://sourceforge.net/projects/indistarter/ https://sourceforge.net... -
3
Project: Icarus
A model rocketry project studying temperatures inside the body tube
... on the temperature between the motor mount and the body tube, the temperature above the motor mount but below the flameproof recovery wadding, and finally the area where the parachute is housed, just above the wadding. This project is used in conjunction with the Arduino Primary Avionics Module (A-PAM) which can be found at https://sourceforge.net/projects/arduino-base-avionics-bay. An Instructable is available at https://www.instructables.com/Project-Icarus-a-Temperature-Sensor-Model-Rocket -
4
SIxO
Multipurpose Vehicle Computer
SIxO is a software project for odometer, tripcounter and multimeter, suppporting many more features for any kind of vehicle. The essential microcontroller hardware (Renesas M16C, graphical display 128x64, casing, keyblock) can be ordered at www.sixo.de. -
Multi-Site Network and Cloud Connectivity for BusinessesAs your users rely more and more on Cloud and Internet-based technologies, reliable internet connectivity becomes more and more important to your business. With Bigleaf’s proven SD-WAN architecture, groundbreaking AI, and DDoS attack mitigation, you can finally deliver the reliable internet connectivity your business needs without the limitations of traditional networking platforms. Bigleaf’s Cloud Access Network and plug-and-play router allow for limitless control to and from anywhere your traffic needs to go. Bigleaf’s self-driving AI automatically identifies and adapts to any changing circuit conditions and traffic needs—addressing issues before they impact your users. Bigleaf puts you in the driver’s seat of every complaint and support call with full-path traffic and network performance data, delivered as actionable insights, reports, and alerts.
-
5
pyindi-client
Python binding to the libindi library
... there are also bindings for node.js, Tcl (incomplete) and PHP (not useful). As application examples you will find a Python Websocket server with which you may build a web application interacting with Indi servers, and a simple PyQt application similar to the Kstars Indi Control Panel (was built as an exercise). Finally there is an equatorial mount 3D simulator written with Freecad and Python, planned to be connected with the PyIndi module. *** The pyindi-client binding has moved to github. *** -
6
Pikon-Stelarium interface
Pikon-Stelarium interface to use with azimuthal mount
This is a full project to make an software-drived azimuthal mount for the Pikon telescope, it can be use for others telescope. This project include : . Some other parts to print to adapt to the Pikon . Python code for raspberry Needed parts for "as it" use : . 1 Raspberry (model A suit well) . 3 motors steppers . 3 steppers drivers . 1 BNO055 (the one from adafruit was used) . 1 Pikon driver . 1 GPS module Sofware requirement : . raspbian . python 3 . some python libraries -
7
libnexstar
C API to control NexStar compatible telescopes
This library implements the serial commands supported by the Celestron NexStar hand control (HC) and SkyWatcher/Orion SynScan HC. This applies to the Celestron: NexStar GPS, NexStar GPS-SA, NexStar iSeries, NexStar SE Series, NexStar GT, CPC, SLT, Advanced-VX, Advanced-GT, CGE, CGEM etc. SkyWatcher: EQ5, HEQ5, EQ6 (Pro), AZ-EQ5 GT, AZ-EQ6 GT, EQ8 etc. and the corresponding Orion mounts. Communication to the hand control is 9600 bits/sec, no parity and one stop bit via the RS-232... -
8
PARot polar aligner
Software for polar alignment of equatorial mounts
PARot is a program for ultra fast and precise polar alignment of equatorial mounts. You can easily achieve alignment accuracy better than 1 arcmin in 5 minutes of time. You take one image of the celestial pole, rotate the mount around the RA axis and take another image. The program compares the images and shows you the necessary adjustment. The adjustment process is controlled by the live-liew created by your camera. Requirements: * A computer with Windows OS (tested with WinXP x64, Win7... -
9
High Speed Parallel Imaging (HSPI)
HSPI does parallel capture and sky surveys.
HSPI offers to the astronomer the possibility to capture pictures from the CCD camera in a fast and intuitive way, keeping under control all the instrumentation in posses. HSPI can control the CCD camera, the mount, the focuser, the filter wheel and the dome from a single interface, and not only this: these features can be added on as many observatories and instrumentations you want. HSPI is ASCOM and INDI compatible, so if you want to use particular setups like Linux computers connected... -
Vivantio IT Service ManagementThe Vivantio Platform allows you to focus on the IT service management tools that make sense for your organization’s unique service model: from incident, problem and change requests, to service requests, client knowledge and asset management
-
10
NexStarCtl
Cross platform Perl API to control NexStar compatible telescopes
This module implements the serial commands supported by the Celestron NexStar hand control (HC) and SkyWatcher/Orion SynScan HC. This applies to the Celestron: NexStar GPS, NexStar GPS-SA, NexStar iSeries, NexStar SE Series, NexStar GT, CPC, SLT, Advanced-VX, Advanced-GT, CGE, CGEM etc. SkyWatcher: EQ5, HEQ5, EQ6 (Pro), AZ-EQ5 GT, AZ-EQ6 GT, EQ8 etc. and the corresponding Orion mounts. Communication to the hand control is 9600 bits/sec, no parity and one stop bit via the RS-232 port... -
11
Savuka-VirtualBox
Virtual Box VDI of SliTaz Linux with Savuka installed and configured
...) --------1024MB RAM -------- Use Existing virtual drive (point to extracted Savuka.vdi) ---- Machine/Settigns/Display: set video memory to 50 MB, enable 2D and 3D acceleration ---- Machine/Settings/Shared Folders: Create new machine folder. Point to any data directory, folder name: DATA, select Auto-mount. Note: "Folder name" must be 'DATA' in all caps to link on boot Thats it! More Info: www.osmanbilsel.net www.paulnobrega.net -
12
Resistor Value Identifier
Identify electronic resistor values
This HTML utility allows the user to select standard color codes or surface mount numbers, then it identifies the resistor value. There is no need to memorize color codes or multipliers. An online working example of this program can be used at ZoomAviation.com/programs. -
13
Instrumented Telescope
Software for instrumenting a Dobsonian telescope
This projects hold software required for instrumenting an alt-az telescope mount. The required hardware is documented here (http://simonbox.info/index.php/astronomy). The software enables real time conversion from (measured) alt-az to ra-dec and manages a connection to Stellarium (http://www.stellarium.org/), which allows you to view where the telescope is pointing in a virtual planetarium. -
14
iAstroHub
Automated astrophotography using mobile devices
... wheel: Starlight Xpress 5. Focuser: Robofocus 6. Flat fielder: Flip-Flat 5. USB serial adapter (PL2303-based) for controlling a mount via a serial port. I recommend ATEN UC232A. 6. Powered USB hub 7. TRONSMART MK808 (with RK901 wifi) or MK808B (with RK903 wifi). I got it from geekbuying.com. Or any RK3066 mini PC stick + an external Ralink5370 usb wifi adapter. 8. Class-10 micro SD card (at least 8GB). If you have any question, discuss here ... -
15
Open PECTool
Open PECTool - manipulate peroidic error data for Celestron mounts.
This is clone of the Celestron PECTool used to upload, download and manipulate PEC data. It is intended to work with Celestron Nexstar mounts like NexStar GPS, NexStar GPS-SA, NexStar iSeries, NexStar SE Series, NexStar GT, Advanced-VX, Advanced-GT and CGE mounts. Communication to the hand control is 9600 bits/sec, no parity and one stop bit via the RS-232 port on the base of the hand control. To build it libnexstar version 0.11 or newer is needed, which can be found here:... -
16
astroDevice
Software platform for the control of astronomical instruments.
astroDevice is a software platform for the control of astronomical instruments (telescope mount, filter wheel, focuser and CCD) through a single interface. This platform manages any astronomical device through plug-ins. It can manage multiple devices of same type (eg two telescope mounts). astroDevice is an alternative to ASCOM and INDI by providing a common interface between each device type and astronomy software such as Starry Night, KStars, Skychart and Stellarium. The platform is based... -
17
indi-skywatcherprotocol
INDI driver for mounts using the SkyWatcher Protocol through RS232
This INDIdriver interacts with a mount controller using the Skywatcher Protocol through a serial link. It can directly drive Skywatcher and similar mounts through a serial port after a conversion of signal levels (see EQDIRECT interface), or any other mount hardware which uses this protocol. This project is similar in its goal to the EQMOD/EQASCOM project, but for the Linux/INDI world. Thus the name of the INDI device is "EQMod Mount", and the driver executable is indi_eqmod_telescope... -
18
Multi-SETI@home Monitor. This program was written to monitor SETI@home and BOINC activity that may be running on multiple computers over a network without having to cross mount file systems. Runs on Windows/Linux/Unix.
-
19
Computerized Telescope
Arduino lx200 based computerized telescope
Arduino al/az mount controller based on lx200 protocol. -
20
The goal of project "defE" is to build a library to handle the simulation of the transformation and collision about deformable geometry using the sphere-spring system. It uses CUDA to deal with the enormous mount of parallel computable calculation.
-
21
EQAlign born as a software that assists to align a German Equatorial Mount (GEM) exactly to the Earth polar axis. Today, in adition to polar align feature, EQAlign is a full featured astronomical software.
-
22
A system designed to drive a computer motorized telescope mount to track artificial satellites in real time. Additionally, provides video time stamping using GPS via dedicated hardware solution.
-
23
hfsad
Hardware, Firmware, Software for Astronomical Devices
This project is a collection of DIY hardware devices aimed at astronomy, together with their firmwares and softwares. At this moment, it contains a PIC based mount motorization, built for an old EQ5-like mount. The firmware implements the Skywatcher protocol.
- Previous
- You're on page 1
- Next