Search Results for "hardware monitor"

NEW V3 version with RTC and buzzer (require V3+ ECG Logger Viewer application) The ECG Logger project is a Wearable Cardio Monitor for Long-Term (up to 24h) ECG Data Acquisition and Analysis (aka Holter) with an ECG live (real-time) mode. This project provides a very low-cost open-source "Hardware and Software" for a Cardiac Rhythmic Holter. The hardware has been made very simple and is based on an Arduino Nano micro-controller with boards for SD card mass-storage, instrumentation differential amplifier and RTC. ...

Please note that OWFS source code, and all Issue/Tickets/merge requests have now been moved to https://github.com/owfs/owfs/. Developer mailing lists will still be kept at Sourceforge. ---- OWFS -- 1-Wire file system. Use the Dallas 1-Wire and iButton chips with standard filesystem commands. Create temperature loggers. Monitor everything. OWHTTPD -- same system, only used as a light weight web server. OWFS is also ported to embedded routers, Mac OSX and Windows. Basically you can use...

Researches have shown that immediate feedback can increase energy saving dramatically. YoMo aims to empower people using low-cost open hardware smart meters in their household. The metering system consists of a coordination unit, a raspberry pi, and several smart meters, arduino boards equipped with communication shields and our self-designed yomo metering shield. The smart meters are attached to household devices and monitor their energy consumption. The gathered data is timestamped and transmitted to the coordination device. ...

Project aims to provide simple but extensible implementation of 'slave' (i.e. monitor side) DDC/CI protocol on AVR ATmega microcontrollers. Current functionallity includes brightness control with DDC/CI and hardware buttons. Requires at least 4K flash, hardware TWI.

Testcard is a SDL/SDL_gfx based monitor test pattern (test card) generator. SMPTE and other test patterns are supported. Future plans include a very basic scripting capability to construct custom test patterns from built in primitives.

monitor software for InSystemDebugging of programs running in an AVR target, using gdb/ddd, under linux, with a simple, low cost interface, which can be used for InSystem or standalone Programming as well.

This project is aimed to develop an Hardware Monitor & Protection System for PCs using PICmicros. This project is divided into two branches: the first one involves microcontroller's firmware, the second one software used to manage the PIC via COM po

This project is a combination of hardware and software used to monitor and control a hydroponic garden. Measures, logs, and charts: pH, EC, Temp, Res Depth, Light. Controls pumps, lamps, and fill/flush. It can contact the user via email or pager.

Controlling a server without keyboard, mouse and monitor. You'll need a free serial line and special hardware(< 5$). Platform: Linux.

The aim of this project is for a stand alone home automation control system which consists of hardware (main and remote networked controllers) and software to monitor and control various devices around your house including X10 (plus others).