Search Results for "hardware monitor"
Sort By:
Showing 19 open source projects for "hardware monitor"
View related business solutions-
Earn up to 16% annual interest with Nexo.Generate interest, borrow against your crypto, and trade a range of cryptocurrencies — all in one platform. Geographic restrictions, eligibility, and terms apply.
-
$300 in Free Credit Towards Top Cloud ServicesStart your project in minutes. After credits run out, 20+ products include free monthly usage. Only pay when you're ready to scale.
-
1
ESP3D
FW for ESP8266/ESP8285/ESP32 used with 3D printer
This firmware allows not only to have a cheap bridge between Wifi and serial, but also to have a web UI to configure wifi, to monitor 3D printer and even control it, and to make things easy, UI is fully customizable without reflashing FW. Firmware should work with any 3D printer firmware (repetier/marlin/smoothie ware using GCODE) if the serial connection has a correct setup. I currently use it with my personal flavor of repetier for Due based boards. The web interface files are present in... -
2
ECG Logger Viewer
ECG Logger Viewer is the application software for ECG Logger device.
NEW VERSION 3.2.1.5 - MARS 2022 ECG Logger is a Wearable Cardio Monitor for Long-Term (up to 24h) ECG Data Acquisition and Analysis (aka Holter) with an ECG live (real-time) mode. The ECG Logger project is aimed for providing a very low-cost open-source "Hardware and Software" for a Cardiac Rhythmic Holter. The hardware has been made very simple and is based on an Arduino Nano micro-controller with two companion boards for the SD card mass-storage and the instrumentation differential amplifier. ... -
3
ECG Logger
ECG Logger is a complete Holter system incl. device and firmware.
NEW V3 version with RTC and buzzer (require V3+ ECG Logger Viewer application) The ECG Logger project is a Wearable Cardio Monitor for Long-Term (up to 24h) ECG Data Acquisition and Analysis (aka Holter) with an ECG live (real-time) mode. This project provides a very low-cost open-source "Hardware and Software" for a Cardiac Rhythmic Holter. The hardware has been made very simple and is based on an Arduino Nano micro-controller with boards for SD card mass-storage, instrumentation differential amplifier and RTC. ... -
4
OpenFlowChem
Platform for laboratory automation based on Labview
...Briefly, you have self-sufficient Device Monitors – programming units responsible for communication with a single physical unit – and a System Module – the high-level programs that send commands to the Device Monitors. In the files presented, you can download several Device Monitor for hardware as well as ample examples of System Modules used for real processes as well as for starting using the OpenFlowChem platform. -
MongoDB Atlas runs apps anywhereMongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
-
5
owfs and owhttpd
Project moved to https://github.com/owfs/owfs/
Please note that OWFS source code, and all Issue/Tickets/merge requests have now been moved to https://github.com/owfs/owfs/. Developer mailing lists will still be kept at Sourceforge. ---- OWFS -- 1-Wire file system. Use the Dallas 1-Wire and iButton chips with standard filesystem commands. Create temperature loggers. Monitor everything. OWHTTPD -- same system, only used as a light weight web server. OWFS is also ported to embedded routers, Mac OSX and Windows. Basically you can use... -
6
YoMo
You Only Meter Once - The open hardware smart metering system
Researches have shown that immediate feedback can increase energy saving dramatically. YoMo aims to empower people using low-cost open hardware smart meters in their household. The metering system consists of a coordination unit, a raspberry pi, and several smart meters, arduino boards equipped with communication shields and our self-designed yomo metering shield. The smart meters are attached to household devices and monitor their energy consumption. The gathered data is timestamped and transmitted to the coordination device. ... -
7
...The interface of the main window is straightforward and intuitive, as it is divided into two tabs called Code and Wiring, each with its specific functionality. Arduino Simulator features touch sensor, LED blinking, 4x4 Keypad, One Digit Seven Segment Display, Serial Monitor to display the output of the code, Wiring to show how to make wiring, Hardware requirements that list the components of the circuit, save log to text file, save the .ino file to use it in Arduino IDE and save the wiring photo as .png file.
-
8
adc2pc
Capture & visualize digital measurements on PC
Application was designed to provide user a capability to visualize ADC measurements flow on PC monitor and to save data on a hard disk. At a present moment application uses serial port connection for data capturing. That is why at first you should provide all hardware drivers and other resources for ADC that allow to communicate with PC. -
9
Simple DDC/CI on AVR
Implementation of DDC/CI protocol on AVR for monitors
Project aims to provide simple but extensible implementation of 'slave' (i.e. monitor side) DDC/CI protocol on AVR ATmega microcontrollers. Current functionallity includes brightness control with DDC/CI and hardware buttons. Requires at least 4K flash, hardware TWI. -
Enterprise-grade ITSM, for every businessFreshservice is an intuitive, AI-powered platform that helps IT, operations, and business teams deliver exceptional service without the usual complexity. Automate repetitive tasks, resolve issues faster, and provide seamless support across the organization. From managing incidents and assets to driving smarter decisions, Freshservice makes it easy to stay efficient and scale with confidence.
-
10
Testcard is a SDL/SDL_gfx based monitor test pattern (test card) generator. SMPTE and other test patterns are supported. Future plans include a very basic scripting capability to construct custom test patterns from built in primitives.
-
11
HOPSA, high oxygen pressure sputter automation, is a Python 3 project to control a step wise sample creation Process. Although written for this specific task it is easy to adopt for any experimental task which changes hardware parameters and waits for a specific condition before proceeding. The graphical interface (QT4) includes plotting (matplotlib), instrument configuration/monitoring and a program step creator. The communication with the hardware is independent of the GUI and any number...
-
12
Driver Logger is an Open Source port analyser. The program is designed to monitor in/out traffic on a variety of bus ports such as USB, Parallel and Serial. The program logs the traffic and can also open, list, categorize and search through the logs.
-
13
Motorola HC08 (especially MC68HC908JB8) monitor-mode programmer project. Includes hardware part (RS-232 programmer design in Eagle) and software part (in C++ for KDE/Qt).
-
14
VOMON (Virtual Observatory Monitor) is a web application that can be configured to watch your virtual observatory services. It is a mashup of the AstroRuntime and the MARS network monitor.
-
15
monitor software for InSystemDebugging of programs running in an AVR target, using gdb/ddd, under linux, with a simple, low cost interface, which can be used for InSystem or standalone Programming as well.
-
16
This project is aimed to develop an Hardware Monitor & Protection System for PCs using PICmicros. This project is divided into two branches: the first one involves microcontroller's firmware, the second one software used to manage the PIC via COM po
-
17
This project is a combination of hardware and software used to monitor and control a hydroponic garden. Measures, logs, and charts: pH, EC, Temp, Res Depth, Light. Controls pumps, lamps, and fill/flush. It can contact the user via email or pager.
-
18
Controlling a server without keyboard, mouse and monitor. You'll need a free serial line and special hardware(< 5$). Platform: Linux.
-
19
The aim of this project is for a stand alone home automation control system which consists of hardware (main and remote networked controllers) and software to monitor and control various devices around your house including X10 (plus others).
- Previous
- You're on page 1
- Next
