Search Results for "fpga"

...Valtr et al., Scanning Probe Microscopy controller with advanced sampling support, HardwareX, Volume 15, e00451 https://www.hardware-x.com/article/S2468-0672(23)00058-5/fulltext It is based on a low cost FPGA board Red Pitaya and additional high bit depth AD and DA converters. When put together with the AFM scanning hardware (sensor, scanner and their amplifiers) and user interface software it can serve as a standalone SPM system. Otherwise, it can serve as a sub-module for a custom built SPM system, e.g. providing the feedback loop mechanism only. ...

#6 - Ultra-Fine-Business Modulation - Trying a new data modulation to compete with LoRa (R)

The Red Pitaya is a commercial, affordable FPGA board with fast analog inputs and outputs. This makes it useful for quantum optics experiments, in particular as a digital feedback controller for analog systems. Based on the open source software provided by the board manufacturer, PyRPL (Python RedPitaya Lockbox) implements many devices that are needed for optics experiments with the Red Pitaya.

darc, the Durham Adaptive optics Real-time Controller. For documentation or darctalk client only, select "View all files". For the latest bleeding-edge version, please use: git clone git://git.code.sf.net/p/darc2/code darc (no password required) (this changed May 2013 due to a sourceforge update). If you use darc, please cite with: Basden, A and Myers, R, MNRAS Vol 242, page 1483, 2012

Tools for FPGA development and IP cores. This project provides tools, cores and documentation to develope FPGA applications. The project focuses on VHDL.

QNICE is a simple 16 bit processor intended to teach the basics of hardware design as well as operating system design. A TTL implementation is planned, a FPGA implementation is available here: http://qnice-fpga.com. Currently there exists a C based simulator and an assembler.

This (Python) tool allows you to easily create FPGA bitfiles for your embedded system, from several Open Source IPs (compatibles with the OpenCores Wishbone bus) . It will also generates the corresponding drivers (currently only Linux ones).

Oscilloscope components, including 100MHz quad A/D, VHDL code for Xilinx FPGA, and driver for Octave or Matlab.

FpgaC compiles a subset of the C language to net lists which can be imported into an FPGA vendors tool chains. C provides an excellent alternative to VHDL/Verilog for algorithmic expression of FPGA reconfigurable computing tasks. More info in wiki.

MerakoGPS is a set of software for Merako-series board aiming at GPS receiver development. MerakoGPS runs on a flexible Merako-series hardware board which uses a CycloneIII FPGA to accomplish the correlator function. see http://www.hyrising.com.

OpenVGA is an free and open FPGA-based implementation of a VGA compatible graphics adapter, and utilising low-cost hardware. The project includes the PCB schematic and artwork, Verilog HDL, firmware assembly code, and driver source code.

Development of a USB interface library to different USB enabled development (hardware) platforms. Including, but not limited to, FPGA prototype boards.

m4-la is a Logic Analyzer written in VHDL for the Xilinx ML403 Development board featuring the Virtex4 FPGA. The user interface is written in C for Windows32 based platforms. Xilinx ISE and EDK tools compile the VHDL and MS Visual Studio compiles the UI.

A complete bootloader that can load both an AVR processor and a Xilinx FPGA using a DataFLASH device to store programs.

asfpga is an assembler written for use in FPGA design. It can be easily modified for your instruction set. The ultimate goal of this software is to allow a FPGA designer to easily write assembly code for a custom instruction set. The current version al