Search Results for "usb data"

Engineering, testing and debugging of serial communication. Supports RS-232/422/423/485 as well as TCP/IP Client/Server/AutoSocket, UDP/IP Client/Server/PairSocket and USB Ser/HID. Optimized for simple command sets of e.g. embedded systems.

A 3-channel fully automated Dew Controller (DIY project) based on Arduino Nano for telescopes. For $48 or less. (c) Copyright Robert Brown 2014-2025. All Rights Reserved. Permission is granted for personal and Academic use only. Code or portions of code may not be copied or used without appropriate credit given to author. A very popular project with over 48,000 downloads. There is a new ESP32 WiFi version at https://sourceforge.net/projects/esp32-dew-controller/ The older...

NEW VERSION 3.2.1.5 - MARS 2022 ECG Logger is a Wearable Cardio Monitor for Long-Term (up to 24h) ECG Data Acquisition and Analysis (aka Holter) with an ECG live (real-time) mode. The ECG Logger project is aimed for providing a very low-cost open-source "Hardware and Software" for a Cardiac Rhythmic Holter. The hardware has been made very simple and is based on an Arduino Nano micro-controller with two companion boards for the SD card mass-storage and the instrumentation differential...

...Thanks to its powerful built-in mathematical expression evaluator, CANStream can also behave as a real control system feeding back the test device or commanding a third party device with context sensible data. Extended data logging and data analysis features of CANStream provide a comprehensive solution for testing and results analysis CANStream extensively uses the PCAN-Basic API developed by PEAK System for the PCAN-USB adapter You will therefore need to have PCAN-USB adapter and at least one free USB port available to make a complete use of CANStream. ...

...http://www.instruman.it Updated source code available at https://instruman.codeplex.com/ This is an interface used to program and control Voltcraft DPPS-32-15 Power Supply, and to log data from Victor 86C Multimeter. It's an all-in-one solution to use the two instruments at the same time for Scientific, Research and Study purposes. Features avaible are the following: -Victor 86C USB HID connection protocol -86C data reading and logging -COM port selection -Continuous reading of Voltage and Current -Continuous logging of Voltage and Current in a Chart with the option to export data to csv file -Possibility to set logging rate from 50 ms -Turn ON and OFF instrument -Set Voltage and Current -Set a custom voltage loop to play and reiterate -Reiteration possible in three ways: for a fixed time, for a fixed number of cycles and until the STOP button is pressed

Diagnostic application for Magneti-Marelli IAW 8F/16F/18F/04K ECUs written in C# for .NET 2.0

Online Signature Verification technology requires primarily a digitizing tablet and a special pen connected to the USB port of a computer. An individual can sign on the digitizing tablet using the special pen regardless of his signature size and position. The signature is characterized as pen-strokes consisting x-y coordinates and pressure with the data being stored in a signature database. Dynamic time warping (DTW) and quadratic discriminant analysis (QDA) is used to get results where the system accepts 2% of forged signatures and rejects 5% of true signatures

...------------- Contacts with the Modem Picks the USSD string from balanceUSSDString.txt Dials USSD and pick up the current balance Picks Short Codes/MSISDNs from number2SendSMS.txt Dials USSD and pick up the balance again Continue the process until it sends SMSs to all the listed Short Codes/MSISDNs in number2SendSMS.txt Usage -------------------- Connect a Phone/Modem with USB data cable to PC Define the USSD string (Ex. *124#) for balance query to balanceUSSDString.txt Define the Short Codes/MSISDNs to number2SendSMS.txt on which SMS tariff need to be tested Make sure you have .Net Framework 2.0 installed in your system Run TariffCheckup4SMS.exe

This is a project we - ten students, 16 to 18 years old, and one teacher - are currently working on in the so called "Physik-Projektkurs" at school in which we build and program our own scanning tunneling microscope. This software is designed for DAQ systems by BMCM (we use the USB-AD16F), but it should not be too difficult to adapt it to foreign systems.It currently supports resolutions up to 1024x1024, visualization in 2D and 3D using colors from predefined gradients, export to PNG,...

Diagnostic application for Marelli-Weber IAW 8F/16F/18F ECUs written in C# for .NET 2.0 PROJECT IS NOW CLOSED, PLEASE USE IAW SCAN 2 INSTEAD.