Search Results for "parallel port control"

Engineering, testing and debugging of serial communication. Supports RS-232/422/423/485 as well as TCP/IP Client/Server/AutoSocket, UDP/IP Client/Server/PairSocket and USB Ser/HID. Optimized for simple command sets of e.g. embedded systems.

An ESP32-S3 WiFi focuser. (c) Robert Brown 2014-2026, Holger M, 2019-2021. All rights reserved. Code or portions of code may not be copied or used without appropriate credit given to authors. Only download the specific Board that you will build. If you try to download all of them, this is not helpful and can impact negatively on the Project build, because the wide range of options can easily cause confusion and hinder project progress. Spreadsheet to calculate what stepper motor to...

4Port USB2.0 controller (Arduino Nano) which you can connect/disconnect ports using remote software application. Ideal for Astronomy solutions such as focusers, cameras CCD, filters etc. Windows application provided for remote control. (c) Copyright Robert Brown 2014-2020. All Rights Reserved. Permission is granted for personal and Academic use only. Code or portions of code may not be copied or used without appropriate credit given to author.

DIY Arduino Boards PCF8674 MCP23017 74HC595 CD4021 I2C Parallel IO Piezo buzzers See the Files section for a wide range of sensors and sample code Schematics PCB Layout Sample Code

HSPI offers to the astronomer the possibility to capture pictures from the CCD camera in a fast and intuitive way, keeping under control all the instrumentation in posses. HSPI can control the CCD camera, the mount, the focuser, the filter wheel and the dome from a single interface, and not only this: these features can be added on as many observatories and instrumentations you want. HSPI is ASCOM and INDI compatible, so if you want to use particular setups like Linux computers connected...

...CANStream allows to extensively test any system using CAN communication by sending and receiving CAN frames. Thanks to its powerful built-in mathematical expression evaluator, CANStream can also behave as a real control system feeding back the test device or commanding a third party device with context sensible data. Extended data logging and data analysis features of CANStream provide a comprehensive solution for testing and results analysis CANStream extensively uses the PCAN-Basic API developed by PEAK System for the PCAN-USB adapter You will therefore need to have PCAN-USB adapter and at least one free USB port available to make a complete use of CANStream. ...

ANNOUNCEMENT Project has moved to a proprietary website! http://www.instruman.it Updated source code available at https://instruman.codeplex.com/ This is an interface used to program and control Voltcraft DPPS-32-15 Power Supply, and to log data from Victor 86C Multimeter. It's an all-in-one solution to use the two instruments at the same time for Scientific, Research and Study purposes. Features avaible are the following: -Victor 86C USB HID connection protocol -86C data reading and logging -COM port selection -Continuous reading of Voltage and Current -Continuous logging of Voltage and Current in a Chart with the option to export data to csv file -Possibility to set logging rate from 50 ms -Turn ON and OFF instrument -Set Voltage and Current -Set a custom voltage loop to play and reiterate -Reiteration possible in three ways: for a fixed time, for a fixed number of cycles and until the STOP button is pressed

TracerInject is a software for computer-guided control of PHD 2000 syringe pump (Harvard Apparatus) to inject radiotracer for PET imaging. For quantitative PET, automatic control of pump is necessary to inject desired amount of radiotracer and TracerInject automatically controls syringe pump via serial port communication. It was originally programmed in MATLAB, but ported to C#. Code was written in SharpDevelop 5.1, and MS .NET Framework 3.5 is required.

Driver Logger is an Open Source port analyser. The program is designed to monitor in/out traffic on a variety of bus ports such as USB, Parallel and Serial. The program logs the traffic and can also open, list, categorize and search through the logs.

We are developing a suite of software to control USB I/O devices. Initially the support will be for Windows and Linux hosted Human Interface Devices (HID) although hopefully this will extend to virtual comms. port control in the future. API coming...