Search Results for "wire"

Turns-n-Layers is a command line transformer and induction coil design aid that calculates the amount of wire needed, both length (feet) and weight (lbs). Also, the finished dimensions of the coil and the resistance are also returned.

...The design is based on the 1-wire family of sensors and data I/O components. The software package is written in C++ and utilizes the owcapi and owlib facilities of the open-source owfs package for all 1-wire transactions. The software architecture is based on the QP hierarchical state machine framework developed by Quantum Leaps, and utilizes their QM modeling tool for state machine template generation.

WeatherMonitoringStation is BeagleBone/Embedded Linux based software written in C++ intended to read, monitor, share and display environmental data such as temperature, humidity, wind speed etc. At this stage of development, temperature is measured using a DS18B20 sensor and sent out via standard output and/or a TCP/IP connection. Additional features will be implemented in due time. Recommended setup: * Eclipse with CDT. * GNU toolschain for ARM. * Oscilloscope. * Open collector...

MSP430G2xx3 - USCI_A0 SPI Master Interface to TM1638, Read/Write command, key scanning, show digit and switch LEDs on board. TM1638 - Driver for Led's indicator, 10 segment output lines, 8 grid output lines, 8 segment/key - 3 lines scanning. See: TM1638 Display/LED module at http://www.dealextreme.com/p/81873?r=68099021 for example module TM1638 for arduino: http://code.google.com/p/tm1638-library/ for Stellaris lauchpad:...

A robotic DIY styrofoam cutter consisting of one rotational and two translational axes. It cuts a variety of shapes out of styrofoam-like materials using a hot wire. This project documents the necessary hardware and software parts. Don't miss the follow-up project at http://raumschaum.org Its goal is to further develop hardware and software into an user friendly application.

Program to calculate the thermal expansion of a wire due to resistive heating by an electrical current.

The goal of this project is to develop a hot wire foam cutter that relies on a simple embedded controller to provide real time functionality.

Magneticle is a 3D OpenGL physical simulation that applies the Biot-Savart law to charged particles operating inside a magnetic field produced by a current-carrying wire modeled as an arbitrary space curve.

FXTurns-n-Layers is a graphical transformer and induction coil design aid. The program allows you to determine: the length (feet) and weight (lbs.) of wire needed to wind a coil. The program calculates the coil's finished dimensions and total resistance,