Search Results for "x-mind"

An USB programmer for various devices, including PIC, dsPIC, AVR microcontrollers, and various kinds of serial eeproms

...Using the PICSimLab Code Project Wizard, you can quickly create pre-configured code templates for both writing and debugging a wide range of boards. For boards based on the PIC16F and PIC18F microcontrollers, the wizard generates projects that utilize MPLAB X. For boards based on AVR, STM32, and ESP32, the wizard generates projects that utilize VSCode+PlatformIO. PICSimLab supports several devices (spare parts) that can be connected to the boards for simulation. Such as example LEDs and push buttons for simple outputs and inputs and some more complex ones like the ethernet shield.

GXSM -- Gnome X Scanning Microscopy: A multi-channel image and vector-probe data acquisition and visualization system designed for SPM techniques (STM,AFM..), but also SPA-LEED/LEED/LEEM data analysis. A plug-in interface allows any user add-on data-processing and special hardware and instrument support. Latest: NC-AFM and related explorative methods as SQDM can be configured.

CLISP is a portable ANSI Common Lisp implementation and development environment by Bruno Haible. Interpreter, compiler, debugger, CLOS, MOP, FFI, Unicode, sockets, CLX. UI in English, German, French, Spanish, Dutch, Russian, and Danish.

Freemat is an interpreted, matrix-oriented development environment for engineering and scientific applications, similar to the commercial package MATLAB. Freemat provides visualization, image manipulation, and plotting as well as parallel programming.

...The end result will be at least three sets of code, for the Alpha, Beta and Gamma versions of Rodney. We would also like to experiment with a "Delta" version which could use either bare RF or WiFi to exchange state data between machines. A "hive mind" if you like. For the new-generation version, we propose targeting two hardware platforms: 1. Arduino, since it's cheap and easy to use, while remaining close to the bare metal 2. A purpose-built AVR card, or easily ported to cards obtainable from sources such as futurlec.com, etc. RaspberryPi is also an option later

Control Applications for Astronomical CCD Cameras

LabMonkey is a collection of designs for embedded devices which can be networked together to provide a range of automation, data logging and signal processing functions. A key design objective is to use as little dedicated hardware as possible for communication between nodes in the network, and to be able to adapt the network topology in real-time so as to minimize the occurrence of collisions between packets. To achieve this, a protocol has been designed specifically for the task, and...

QUASI is stand-alone AVR RISC processor simulator with debugging features, EDA-like GUI and plugin interface.

FFFF is the fastest Win32/OSX/Linux/IRIX Mandelbrot generator. Features OpenGL, realtime zoom, SSE/AltiVec QuadPixel, SSE2/3DNow! DualPixel calc, FPU per pixel calc, GPU asm (Fragment/Vertex) calc, multiprocessor support, and benchmarking. Opt asm code!

Common Hardware Recovery Solutions by Ukrainian-Russian network

Firmware and GUI code for the Geckodrive G200X motion controller

FreeSP is an infrastructure for programming platform-independend online signal processing applications. Ports to specific platforms (like DSPs and microcontrollers) are made by simply exchanging the freeSP System-module.

DesktopTools is a collection of small utillities which help to make your daily life easier. Since the tools themself are rather small (projectwise) I keep them not as individual projects, but have them under this collective name.

Defunct project.

XAudine : Linux control command software,GUI and device drivers for operating Audine astronomy CCD camera.

"DSO" is a Digital Signal Oscilloscope. My DSO will be connected via the USB to the PC. All software to operate the DSO is developed within this project.

Thanks to carefully thought out architecture an emulator for all hardware (i386 i860 sparc hppa SGI Mips Alpha etc) on any hardware. A lot of new theories have gone into this trying to fix old problems.

JellyMark is a next-generation OpenGL and CPU benchmarking program. Features: Realtime Physics simulation of non rigid body bouncing in a rotating cube. 100% Assembly optimized FPU spring calculation routine. Cube environment mapping for reflections.

control unipolar stepper motors connected to a parallelport.

A function is computable if it can be computed by a Turing machine. A Turing machine is a very simple machine, but, logically speaking, has all the power of any digital computer. The Turing Optimizer utilizes this to superoptimize code.

Improving the speed of the signal analysis code for Seti@home. Leveraging modern processors advanced features such as SIMD and parallel execution units, as well as identifying better methods to code existing functions.

The open bicycle computer (oBiCo) is an outdoor computer to be mounted on your bike. We are providing an open source based plattform to ether use Linux based software or go with a small GPL'ed C++ OS (Booting in just 2 seconds)