Search Results for "using"

myFocuserPro is an ASCOM and Moonlite compatible stepper motor telescope focus controller (DIY) based on Arduino Nano/Uno. A popular DIY ASCOM focuser with more than 121,000+ downloads. (c) Copyright Robert Brown 2014-2024. All Rights reserved. Permission is granted for personal and Academic use only. Spreadsheet to calculate what stepper motor to use. https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/Documentation/Nema-Stepper-Motors.xlsx/download

...It can program: - Microchip PIC10/12/16/18/24/32/dsPIC30/33 - Atmel ATtiny, ATmega - TI MPS430 - NXP ARM Cortex-M0+ - Silicon Labs C8051 And this: - with light modifications to the Bootloader firmware for new devices - without modifying your source code or using a special linker script - via GUI or command line prog - with automatic Reset

A simple to use serial communication software for communicating with other serial, MCU and Arduino. The SoftIB Serial Communicator communicates with other Serial devices that use a simple asynchronous communication using only the RX and TX signals without any control signals. The application was developed based on the communication with microcontrollers, but it can be used in all other cases.

This project has the language data for spel, the main new codebase is at: https://gitlab.com/liberit/pyac A computer programming language using human language syntax for human-to-human and human-to-computer communication with high precision, supporting many languages. Currently has alpha prototype support for analytic versions of the UN languages English, Mandarin Chinese, Spanish, Arabic, Russian and French as well as a bunch of others in addition to the core mwak language. ...

PPMScope is a do-it-yourself oscilloscope with an open source design. The intent is that the project can be constructed by an electronics hobbiest using the instructions included. The design is a compromise between features and cost. The bandwidth is lower than a commercial scope, so it's use is limited to signals of 500 kHz and below. It's sample buffer is also smaller than a commercial scope, however sufficient for most oscilloscope functions. This is a version based on the PIC16F877A microcontroller running with a 20MHz clock. ...

...Related probable primes (3^p -+ 3^((p + 1)/2) + 1)/7 are sieved at the same time. See http://oeis.org/A125743, A125744. After sieving, the Berrizbeitia-Iskra or a Proth test can be run; this is best implemented with FFT mod (3^3p+1) using GWNUM library. A sample implementation (a patch to the LLR program) is available from Batalov. [1] P.Berrizbeitia B.Iskra, 2010; http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.189.311 [2] OEIS: http://oeis.org/

...Application written in C# 4, .Net Framework 4.0 , Visual Studio 2010 Features: - IDE- like environment with MDI interface - Customizable (plug- ins) architecture: instruction sets, directives, registers, additional MDI windows - Own assembler using Intel syntax producing binary programs - Simulation of i386- like CPU operating on multi- level cache and RAM - Simulation of debugger and memory view - Features of simple OS: scheduling, multi- tasking by context switching, memory management Currently available version considered "initial". Some of features were simplified or cut out (eg. plugins were statically built into project rather than loaded dynamically) to meet the deadline. ...

This project is a project to make a small robot using Linux as the OS.

Prices of commercial Dragway timing systems too daunting? Using a 'thrown away' PC and a bunch of time, an IntelliDrag system might be just the ticket for you.

This is a map internet web service based on a huge raster maps or satellite images for tracking and monitoring the mobile objects (cars etc) using GPS.

This library is meant for high performance calculations for science or 3D games/rasterizers using SIMD instructions of x86 processors to allow an unparalleled level of optimization. This takes advantage of MMX, 3DNow!, 3DNow!+/MMX+, & SSE/SSE2/SSE3/SSSE3

This project aimed at creating framework and binary data format for etymological Arabic system. and will not continue hosted at sourceforge because the term of use determine me as enemy, so I am prohibited from using sourceforge services.

A generic C++ matrix library using expression template and metaprogramming to provide specialized code for various kind of matrix operations.

A complete bootloader that can load both an AVR processor and a Xilinx FPGA using a DataFLASH device to store programs.

PicOload is a programmer and a bootloader that allow to program a PIC 16f87X / 16f87XA using a RS232 serial line whithout leaving the chip from his support and without disturbing the rest of the device

Co-operative Task Scheduler for PIC based software. Written using gpasm / mpasm macros.

Maiden-core is a Linux kernel robotics API module, extensible in Erc. The Maiden Project also documents and develops the Maiden architecture for mobile robots, a set of (optional) designs and standards for robots using the Maiden-core API.

Computer Vision Software designed for AttyTheWalker, a made from scratch hexapod robot. Entirely developed in C language for GNU/Linux platforms it's the best way to move the robot using a personal computer with RS-232 serial communication.

HallRunner is a robotic navigation and management system. The robot will navigate using an internal map of the building, and will show it's position in real time.

An open source set of embedded software libraries in C, C++ and Assembler for robotics programming, targeting controllers using Motorola's 16 bit controllers, concentrating on the 6811 and 6812. Development of a common development toolset.

Fast-Fourier-Transform-based number theory code to test Mersenne numbers for primality using the Lucas-Lehmer test and the Crandall-Fagin irrational-base discrete weighted transform (IBDWT) algorithm (Math. Computation 62 (205), pp.305-324, January 1994)

This project will use 3D Human Emulation using sensors to pickup human movements and displaying them on GUI for analysis.

This STL-like C++ library contains classes for long integer numbers processing with using of assembler functions as a backend. Lazy evaluation is also used for optimization. It also contains generic implementation of classical number-theory algorithms.

Mobile Connect is a tool used to enable connection of mobile devices supporting J2ME, or other Mobile Operating Systems like Symbian. It can use connection like BlueTooth to transfer data and connect or emulate functions like SMS messaging using PC conne