Search Results for "qt-based"
Sort By:
Showing 68 open source projects for "qt-based"
View related business solutions-
MongoDB Atlas runs apps anywhereMongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
-
$300 in Free Credit Towards Top Cloud ServicesStart your project in minutes. After credits run out, 20+ products include free monthly usage. Only pay when you're ready to scale.
-
1
EQ Track
Collection of embedded softwares to control a telescope mount.
EQ Track purpose is to provide amateur telescope makers (ATM) with electronic board schematics and embedded software to control their telescope mount via stepping motors. EQ Track comes in different "flavors" : - "Basic" controls the right ascension and declination motors of an equatorial mount. - "Go To" controls the motors of a mount in any orientation (ie. equatorial, altazimuth, alt-alt), to point and track equatorial coordinates. -
2
Arduino ASCOM Focuser Pro DIY
Arduino Focuser, fully ASCOM complaint
myFocuserPro is an ASCOM and Moonlite compatible stepper motor telescope focus controller (DIY) based on Arduino Nano/Uno. A popular DIY ASCOM focuser with more than 121,000+ downloads. (c) Copyright Robert Brown 2014-2024. All Rights reserved. Permission is granted for personal and Academic use only. Spreadsheet to calculate what stepper motor to use. https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/Documentation/Nema-Stepper-Motors.xlsx/download -
3
Tiny Multi Bootloader+
Serial Bootloader for Microchip, Atmel, NXP, TI, 8051 microcontrolers
...This Bootloader consists of: - firmwares for many devices (this firmware need to be send to the device's flash memory with a programmer, only once) - a PC software which communicates with the bootloader firmware in the device and send the user's program in its memory Where does it come from? This Bootloader is based on "Tiny PIC Bootloader" made by Claudiu Chiculita. A special THANK to him!!! What can it do? It can program: - Microchip PIC10/12/16/18/24/32/dsPIC30/33 - Atmel ATtiny, ATmega - TI MPS430 - NXP ARM Cortex-M0+ - Silicon Labs C8051 And this: - with light modifications to the Bootloader firmware for new devices - without modifying your source code or using a special linker script - via GUI or command line prog - with automatic Reset -
4
GXSM
Scanning Probe Microscopy Controller and Data Visualization Software
...A plug-in interface allows any user add-on data-processing and special hardware and instrument support. Latest: NC-AFM and related explorative methods as SQDM can be configured. High-Speed external PAC-PLL hardware option with digital DSP link. Based on several hardware options it supports a commercially available DSP hardware and provided also Open Source Code for all the low level signal processing tasks and instrument controls in a most flexible and adaptable manner. All latest software is available via SVN only or Live Demo/Install CD: http://www.ventiotec.de/linux/GXSM-Linux.iso -
Enterprise-grade ITSM, for every businessFreshservice is an intuitive, AI-powered platform that helps IT, operations, and business teams deliver exceptional service without the usual complexity. Automate repetitive tasks, resolve issues faster, and provide seamless support across the organization. From managing incidents and assets to driving smarter decisions, Freshservice makes it easy to stay efficient and scale with confidence.
-
5
CLISP is a portable ANSI Common Lisp implementation and development environment by Bruno Haible. Interpreter, compiler, debugger, CLOS, MOP, FFI, Unicode, sockets, CLX. UI in English, German, French, Spanish, Dutch, Russian, and Danish.
-
6
FastFlow: programming multi-core
Pattern-based multi/many-core parallel programming framework
FastFlow is a C/C++ programming framework supporting the development of pattern-based parallel programs on multi/many-core, GPUs and distributed platforms. FastFlow run-time is built upon non-blocking threads and lock-free queues. Thanks to its very efficient CAS-free communication/synchronization support (e.g. few clock cycles core-to-core latency), FastFlow effectively supports the exploitation of fine grain parallelism, e.g. parallel codes managing very high frequency streams on commodity multi-core. ... -
7
Freemat is an interpreted, matrix-oriented development environment for engineering and scientific applications, similar to the commercial package MATLAB. Freemat provides visualization, image manipulation, and plotting as well as parallel programming.
-
8
SoftIB Serial Communicator
UART communications with data flow monitoring
...The SoftIB Serial Communicator communicates with other Serial devices that use a simple asynchronous communication using only the RX and TX signals without any control signals. The application was developed based on the communication with microcontrollers, but it can be used in all other cases. -
9
PPMScope
Microcontroller based PC Oscilloscope
...The bandwidth is lower than a commercial scope, so it's use is limited to signals of 500 kHz and below. It's sample buffer is also smaller than a commercial scope, however sufficient for most oscilloscope functions. This is a version based on the PIC16F877A microcontroller running with a 20MHz clock. The maximum sampling rate is 1 MHz with a 5 Mhz equivalent sampling mode. Currently, the computer interface supports USB, serial, and parallel ports. Good luck on the construction and I hope you enjoy your oscilloscope. I am happy to answer any questions or provide technical support for this design. -
Go From AI Idea to AI App FastAccess Gemini 3 and 200+ models. Build chatbots, agents, or custom models with built-in monitoring and scaling.
-
10
CMAKE build enviroment for CMSIS MCUs
CMAKE build enviroment for LPC2000 and LPC17xx Cortex MCUs
The goal of project is to build CMSIS like environment for LPC2000 series MCU and to write RTOS for LPC2000 and Cortex Microcontrollers -
11
QNICE is a simple 16 bit processor intended to teach the basics of hardware design as well as operating system design. A TTL implementation is planned, a FPGA implementation is available here: http://qnice-fpga.com. Currently there exists a C based simulator and an assembler.
-
12
EthernetWeatherStation2
PIC based weather station
Microhcip PIC18F based LCD weather station that uses Ethernet connection to download data from the Internet. -
13
PROS
Custom firmware and IDE for the VEX Cortex Microcontroller
This project has been moved to http://pros.cs.purdue.edu/ PROS is a lightweight and fast alternative operating system for the VEX Cortex Microcontroller. It features multitasking, low-level control, and Wiring compatible functions to harness the full power of the Cortex. With a real-time kernel based on FreeRTOS and a development environment built on Eclipse CDT, PROS uses proven software to increase the reliability and usability of the VEX development system across all three major computing platforms. PROS is currently under active development to make it usable for VEX high school and middle school teams. PROS is intended for advanced VEX users seeking to move beyond competing environments. ... -
14
ppc_sim_booke
e500v2 simulator
An experimental ISS for freescale's e500v2 core. It is meant to simulate only cpu and memory subsystem and is purely intended for academic/learning purposes only. -
15
rPem3D
PET/PEM image reconstruction based on MLEM
Various utilities useful for handling PET data esp. of stationary planar PEM, including fully 3D ML-EM based image reconstruction, real time viewing of scanning image and the KDE based GUI for scanning, viewing and image reconstruction. -
16
-
17
chameleon_14443
Low-cost, ISO 14443 compliant emulator for contactless smartcards
! This website is discontinued ! The new, improved MiniChameleon is maintained as of January 2014 on github: https://github.com/emsec/ChameleonMini ATXmega based emulator for contactless smartcards, designed and maintained by Embedded Security Group at the Ruhr-University in Bochum. -
18
This is an attempt to write a CPU emulator in Trolltech QT 4.4. Basic Functionality: - 8 bit registers - Self-composed instructoin set (in progress) - Data and Assembler Editor / parser (not started) - Text and graphical input / output (not started
-
19
Iterate function viewer for Windows and Linux. It has built in 14 different iterate {Mandelbrot) functions. Many possibilities for changing parameters, saving as bitmap or small file. windows-32. Linux 32 - 64bit. Low level written in assembler.
-
20
My version of "The Theory of ALL". Based on XOR, BitJump(BitMove), BitClone(BitCopy). I have some problems with adding this basics of mathematics & physics...
-
21
libNT is a Number Theory Library which is based on a BigInteger Class. It will contain several algorithms for solving Number Theory Problems. Written in the IDE Code::Blocks
-
22
A strong, yet minimalistic Math-oriented Programming Language (MML) providing an easy-to-use console and a command-line script interpreter, targetted towards fast calculations for extremely big numbers, and bundled with a number of math libraries.
-
23
RubyMoss is a Web - Based Framework written with Ruby on Rails, intended to support all analysis and data processing for Mossbauer Spectroscopy. Written under BSD License.
-
24
PyramidWorkshop is an image-compression System based upon the scientific work of John Robinson (inventor of BTPC) about image-compression with adaptive linear predictors and is in average more efficient than PNG/JPEG2000.
-
25
The cc3 project provides software for embedded vision systems. Currently, the software runs on the CMUcam3 hardware platform, which is a NXP LPC2106-based board with an onboard CMOS camera and FIFO, MMC interface, serial UARTs, and servo controller.
