Search Results for "parallel port"

The "electronics" package for GNU Octave provides functions for electronics calculations. Select resistor or capacitor values from E3 to E192 series, convert two-port parameter sets, calculate operational characteristics (voltage gain, current gain, input impedance, output impedance) for two-port circuits connected to generator and load impedance, convert ratio to dB and vice versa, calculate parallel impedances, and round values to a number of significant leading digits.

...It supports Philips, Logitech, uvc webcams, QHY5, QHY6, DSI2PRO, QHY5L-II-M, QHY5L-II-C, QHY5-II, ATIK, Starlight Xpress, ZWO ASI astrocams for video and FTDI chip-based, parallel port-based (LPT), GPIO-based, GPUSB devices, Nexstar-protocol based and QHY5, QHY6, QHY5L-II-M, QHY5L-II-C, QHY5-II, ATIK, Starlight Xpress, ZWO ASI astrocams for pulse guiding. Starlight Xpress ltd. is helping this project http://www.sxccd.com/

DIY Arduino Boards PCF8674 MCP23017 74HC595 CD4021 I2C Parallel IO Piezo buzzers See the Files section for a wide range of sensors and sample code Schematics PCB Layout Sample Code

Virtual instrumentation software, currently designed for modifying automobile engines. Intended as a modular framework to communicate with devices on an IO port (serial, parallel etc.) and allow a visual representation of the instrument.

prog89S52 is a utility for Linux on the PC, allowing programming of Atmel's AT89S52 microcontroller via the parallel printer port. Atmel's 89S are programmable via an SPI port and therefore require absolutely no additional components in order to program them in-system. This program requires a standard "Centronics" type PC parallel port (a bidirectional, EPP or ECP port is not required). A 5-way cable is required to connect the microcontroller to the port; wiring information is given in the included manual page. ...

...To ease creations of many menus with always same appearance. Simple example menus demo provided. Low-level LCD part included is for classic hardware HD44780 through the parallel port (based on code by Randy Rasa, see at http://ee.cleversoul.com/lcd-project.html)

Control your PCs parallel port output with just a few clicks.

Parallel Port Control Made Easy - parashell allows control of a PC parallel port (input and output) with simple command line arguments. The simplicity of these programs make it very easy to use in scripts. Control stepper motors, Relays, LEDs, etc...

Driver Logger is an Open Source port analyser. The program is designed to monitor in/out traffic on a variety of bus ports such as USB, Parallel and Serial. The program logs the traffic and can also open, list, categorize and search through the logs.

The 'LPT Interface' application is great for students. With 'LPT Interface' pupils can write & read the parallel port's: Data Port (8 bit), Control Port (4 bit) and read Status Port (4 bits).

This C++ and Qt based project provides an easy way to control the step motor boards PAO-3M and SMK-4M-4A from Grummes Elektronik GmbH from within your own application. Interfacing is done using the LPT parallel port.

JPlasma is a Java port of PLASMA (Parallel Linear Algebra for Scalable Multi-core Architectures)

A free software made to control the parallel port on linux systems. Programmed in C em GTK the software allows to control, monitore em automatize the old printer port, and made it useful again.

FoamBlade provides a complete toolchain for hotwire foam-cutting. FoamBlade currently supports 4-axis hot-wire foamcutting machines that are connected to the parallel port. Generating cut-files from special built DXF-Files is also possible.

The goal is an Ascom driver for parallel port connected, telescope controlling stepper motors.

Read/write data to your parallel port from Linux using this GUI app. Control individual pins. Good for hardware interfacing.

The parallel port PWM and/or encoder kernel space Linux driver allows open/closed loop control of motors using the parallel port.

PICPrg is a fast Linux command line (or ncurses) program, to program any Microchip PIC microcontroller using the PC parallel port interface. Any parallel port PIC programmer hardware can be used, simply edit the configuration file or use the ncurses conf

Mind this project is no longer maintained. You might be interested in having a look at http://pythonhosted.org/plasduino/ instead. Framework for data acquisition through the parallel port, suitable for performing simple didactic physics experiment.

Software for parallel-port data acquisition devices built using the MAX186 analog-to-digital converter.

Input/output (IO) C library exposing a common API for real mode and permission-restricted access to parallel port under Windows, Linux and MS-DOS operative systems. It also allows pin-by-pin port access.

Java pic programmer for the pic 16F8X / 16F628 series pic chips. The programmer utilises the parallel port to interface with the pic programmers electronics. The Java programmer will initially be targeted at linux OS but, with help, hope to expand the to

Currently-under-development library of OS-independent objects to provide complex parallel port control, high-resolution timers and other similar facilities needed when using PC I/O ports to control external digital electronics.

An open-source Windowslibrary for low-level parallel port access. Does not require installation of any drivers. Emulates API of most commonly used solutions.

Control up to 8 electrical devices with gportal using your PC's parallel port. Add power to your Linux box and let it do the hard work of turning on/off the lights in your home or business. Written in C, runs with Xwindow and uses GTK+ 2.0.