Search Results for "linux uart"

A modern, stand alone browser-based serial terminal for UART communication with microcontrollers, embedded devices, and IoT hardware. No installation required - just open in your browser and connect to your serial device. Just unpack the zip file into local folder and open index.html in Chrome/Edge/Opera. Works on Windows/Linux/MaOS

RxtxConsole is an API and GUI software, developed by Doidx with JSerialCom as the kernel. It can be used for multi- UART/RS232 interface operation. The platform supports Windows/MAC/Linux. Note: Developed with Java17 Follow these steps step by step to apply RxtxConsole, 1. LIST, to obtain all Serial ports currently available on the system. 2. CONNECT, Select a Serial port for connection and place it in the connection pool for use 3. ...

Electronic circuit simulator. Simple environment to run and debug firmware for AVR 8-bit microprocessors. Able to run arduino firmware. Internally this program uses the open source Simavr AVR Processor Simulator (https://github.com/buserror/simavr) and wraps all its functions in a GUI shell. Setups for firmware debugging scenarios can be created dynamically. Able to run 16MHz MCU with decent set of external parts in real time. In particular this can be used for development of CNC firmware...

PK2Aux is a library and suite of command-line utilities for using the Microchip PICkit2 programmer device for purposes other than programming (such as the generic pin controls, serial UART, and logic analyzer modes provided by the Windows software).

The Beaglebone Black project presented here is a software written by Python and Qt and is intended to show the simple control of inputs and outputs (GPIO), the graphic course of input signals GPIO, the configuration and sending and receiving of data via the UART interfaces, the display of the PIN configuration of the Beaglebone Black and the graphic display of the signal course at the analog inputs. The software runs on the BBB under Debian 8.9 and on Linux computers (as a demo). It is intended to demonstrate the interaction of software with hardware and to encourage the development of peripheral hardware that works with the software described here. ...

A simple to use serial communication software for communicating with other serial, MCU and Arduino. The SoftIB Serial Communicator communicates with other Serial devices that use a simple asynchronous communication using only the RX and TX signals without any control signals. The application was developed based on the communication with microcontrollers, but it can be used in all other cases.

PyRadmon Reborn. This project started after the original programmers quit supporting it. The project now contains support for audio*, has a version that supports two Geiger counters** and a cleaner, more stable code. * = PyAudio is used as library for the audio support. ** = The two counters both run in their own thread. UPDATE-2015-2: * Added timeouts to sockets to prevent crashing of the script. * Updated some comments. UPDATE-2015-1: Since there have been some passed time...

This program is a logical signal analyzer tool for Arduino which helps listening TWI communication or UART with low baud rates (19200).

ACTIface (A Customizable TP-UART Interface) connects a PC to a KNX TP1 (EIB TP) network. It is built around a popular ASIC (the TP-UART) and optionally includes a microcontroller for improving communication with the PC (or standalone operation).