Open Source Test and Measurement Software - Page 7

openmsr is a collection of tools around Instrumentation,Control and Automation ( ICA ). It runs under the following OS: Windows, Linux and Mac OSX. Ther are tools like digital simulation, object recognition, SoftPLC. Tools Messen,Steuern und Regeln

OpticsBenchUI software is dedicated to the automation of optics lab experiments. Optics instruments are interfaced using several other open source projects among which dc1394, aravis, comedi. OpticsBenchUI allows inter-operation of digital cameras (Firewire, GigE Vision, CameraLink), actuators (RS232, USB, Ethernet), spatial light modulators (SLM), digital I/O and analog I/O boards (counters, DAC, ADC) and a Supercontinuum laser source (CP210X USB to UART bridge). Each instrument can be configured and operated individually. Strategy scans involving all instruments can be programmed in a simple acquisition panel. Data are saved in a hierachical way, adapted to scan profiles (HDF5 file format). The graphical user interface is based on open source Qt.

piconf is an XML based framework for automating common procedures by providing general purpose tools to, among other taks, remotely configure a list of embedded devices, or perform firmware upgrades of them, or read out data in parallel. The name piconf is an abbreviation of Processing Instruction Configurator. This means it enables you to configure processing instructions representing the procedures, piconf automates for you. It is licensed under the AGPLv3 as published by the Free Software Foundation on 19 November 2007. The coding language is C++11 making use of object orientation and polymorphism. It is intended to work on all POSIX-compliant (Linux/BSD/UNIX-like) operating systems and on some embedded devices, e.g., Zynq based devices like the ZedBoard or the MicroZed supporting the AXI interface to communicate between the Processing System (PS) aka CPU and the Programmable Logic (PL) aka FPGA. It consists of two main binaries following a master/slave model.

PK2Aux is a library and suite of command-line utilities for using the Microchip PICkit2 programmer device for purposes other than programming (such as the generic pin controls, serial UART, and logic analyzer modes provided by the Windows software).

qfv is a tiny but strong GTK+ based verification utility. It's module driven to include different types of verifications and algorithms like md5sums, sha1sums, SFV, etc.

This is a Linux command line tool to do raw I2C accesses to a bus, IF SUPPORTED BY THE ADAPTER, to probe the bus, read or write some data, detect glitches, do a bench, program an EEPROM with the required blocksize, test the I2C bus driver, ... Raw I2C mode enables data frames that are not supported by SMBus and related tools (such as i2cget, i2cset, i2cdump)

Provide an easy way to modify the rounding mode of iEEE754 operations in an program. The aim of this tool is to allow the evaluation of the numerical quality of a code by comparing results given by the same code using different rounding mode.

This is a very basic speedometer application for Android phones. Features: -Uses GPS -Speed is shown in both m/s and km/h -Keeps track of top speed

This tool was intended to be run under OpenWrt (so it's small and has no dependencies) but it can be also built/run under most other *nixes and Windows. It's very easy to use, run it with -h or --help argument to see a brief howto. I hope someone finds it useful.

MATLAB GUI and code to map cell distribution around smooth spherical microcarriers beads from laser scanning confocal microscope images

vermillioBridge is a data acquisition system intended to provide students and home developers a cheap solution for sensor calibration and analysis. The hardware is based on the Arduino microprocessor board as it has a large following and cheap cost.

Vision2 serves as tool for ophthalmologists and other vision testing professionals. It's useful for a variety of ophthalmology testing applications related to stereo vision. It implements many of classical tests but also new types of vectographic and random dot exams. Program was created as part of diploma thesis in Wroclaw University of Technology in Poland.

This is simple USB port base curve tracer for NPN transistors. This curve tracer is build around Microchip's PIC18F4550 MCU and it does not need driver installations and/or any complex software installations.

Antenna, a free and open-source dvb-t (terrestrial digital tv) tuner for linux desktops. Antenna is a full featured tool to see what's going on in the sky. It enables you to scan, watch and record television, radio and services broadcasted on air.

pyOBD-II (a.k.a. "pyobd2") is a Python library for communicating with OBD-II vehicles. Its goal is to make writing programs for vehicle diagnostics and monitoring vehicle data as easy as possible. Relies on pySerial to communicate with ELM scanners.