Search Results for "system 1"

MultiCAN implements a CAN Bus device support for EPICS. EPICS is a framework for control systems, the CAN Bus is a reliable real-time field bus. The ‘Multi’ und MultiCAN stands for ‘Multi Protocol support’, so it supports more than one protocol for CAN Bus communication. MultiCAN has support for the CANOpen protocol and the older CAN Application Layer (CAL).

Max IEC Gateway connects Modbus devices to SCADA systems. It reads meters, inverters, PLCs and drives over Modbus TCP, Modbus RTU (RS-485/RS-232) or RTU over TCP, and serves the data as an IEC 60870-5-104 or IEC 60870-5-101 controlled station (slave). Map registers to IEC points in a web dashboard: single and double points (also from register bits), measured values, step positions, bitstrings and energy counters, with any byte order, scaling, deadbands and time tags. SCADA commands are...

SimpleDCS is a Distributed Control System made easy - fully configurable both on hardware and a software level. Experimental stage (alpha)

Experix is a command-line driven environment for laboratory data acquisition and device control and graphical presentation and analysis of data. Written in C for GNU-Linux . Tested on PC and Raspberry Pi. The core is written very generally in order to support applications by means of script files. Device interfaces: PCMCIA daq (2 devices tested) via kernel module with interrupt handler and memory-mapped data; USB daq (1 device tested) using libusbx; running an equipment servicing program...

S.E.E.R. 2 is a full featured SCADA / Historian / Aggregate Analysis System developed to work as a 'front end' for mod_openopc. Written in pure PHP (HTML 4.01 Transitional), and driven by a web-based user interface for universal deployment.

Allows OnLine monitoring of all kind Asterisk functioality: - Real-Time channel monitoring; - Queue Agents control; - Conference Administration; - Config edition; - Asterisk Core monotoring;

This project is aimed at producing open source hardware for real time use in industrial automation. This project will have a few sub-projects that will focus on individual hardware for various industrial purpose. Some of the sub-projects will be of type Field-IO Modules development, Analog-IO Module development etc.

Remote monitoring and controll system for home use. Main goal is to create multilayer software for collecting data (weather data, measured data), gain remote access via web page, and controll some aspects like heating and lighting. https://flattr.com

DAVIC (Distributed Automation Via Implicit Channels): A simulation platform for doing research on wide-area automation problems like the electricity grid, based on OMNet++